• Industrial Engineering and Management Systems
• /
• 제15권4호
• /
• pp.307-317
• /
• 2016

According to most of energy sector experts, at least in the next two decades, fossil energy plays important role in fulfilling required energy in the world. Based on these conditions, the investigation of the conditions of major countries providing natural gas in the world can be useful in analysis of future development of this clean fuel. According to the latest estimations of British Petroleum Company, Iran with 18.2% natural gas reservoirs has the first natural gas reservoirs in the world. The main purpose of this paper is developing scenarios of gas industry in Iran. To achieve the mentioned goals, besides investigation of existing methods of scenario design and existing production scenarios, natural gas export and consumption in Iran and the world in 2035, the most important scenarios of gas industry in Iran are formulated by critical uncertainty analysis approach using quantitative advanced time based impact analysis in 2035 horizon.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.147-148
• /
• 2018

• KIEAE Journal
• /
• 제11권4호
• /
• pp.71-78
• /
• 2011

The goal of this study is to analyze the impact of load factors on building energy consumption by using EnergyPlus program. We selected a campus building and monitored energy consumption from January 2009 to November 2010. First, we simulated energy consumption basically with weather data, building heat gain and EHP performance data. And then we simulated energy consumption with three additional parameter(infiltration, OA control and schedule). Simulation results are verified by MBE and Cv(RMSE) proposed by M&V guideline 3.0. Simulated total energy consumption was 104.3% of measurements, 4.33% of MBE, and 13.62% of Cv(RMSE). Results show infiltration and schedule were revealed as the most dominant factor of heating energy consumption and of cooling energy consumption, respectively.

• 환경영향평가
• /
• 제23권1호
• /
• pp.11-17
• /
• 2014

Since the Renewable Portfolio Standard (RPS) would be started in 2012, the use of renewable energy should be 11% of total energy use including bio-fuel in 2030. The economic efficiency for renewable energy in B power plant was considered with the bio-diesel, wind power and solar power. The Net Present Value (NPV) and Benefit/Cost Ratio(BC) were used for the economic efficiency with the cost and benefit analysis. In case of bio-diesel, the cost resulted from the fuel conversion and the benefit would be created with trade and environmental improvement. With regard to wind power and solar power, the construction cost would be required and benefit factors would be same as the bio-diesel. The wind power was the best of economic efficiency of renewable energy as the results of NPV and BC ratio. Whereas, the market of wind power was very popular and the techniques of wind power has been developing rapidly.

• Journal of Korea Trade
• /
• 제26권1호
• /
• pp.1-19
• /
• 2022

Purpose - This paper analyzes the economic and non-economic factors that contribute to environmental sustainability by reducing CO₂ emissions, based on G20 panel data. Design/methodology - We conduct a comparative analysis of advanced and developing economies during 1995-2016. To examine the impact, an environmental Kuznets curve (EKC) model was employed, incorporating additional explanatory variables such as internet use, renewable energy, and services trade. Findings - The empirical findings show the existence of an inverted U-shaped EKC phenomenon between GDP per capita and CO₂ emissions in G20 economies, with the turning point at a per capita GDP level of US$ 38,340. Moreover, an inverted U-shape relation exists between internet use and CO₂ emissions, with the turning point at a 44% internet use rate. The comparative analysis show that the inverted U-shape curve only exits in advanced economies, with turning points of US$ 42,356 per capita GDP and 27% internet use rate, respectively. Renewable energy and services trade have a greater negative impact on CO₂ emissions in advanced economies than in developing economies. Originality/value - Renewable energy and services trade have a greater negative impact on CO₂ emissions in advanced economies than in developing economies. Overall, the results suggest the role of internet use, renewable energy and services trade in sustainable development in G20 countries.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.1-8
• /
• 2002

물체가 수중에 입수할 때, 원래의 운동에너지는 물체와 그 주위의 물에 부가질량 형태로 분배된다. 이러한 에너지 혹은 운동량의 전달에 기인하여 물체는 유체동력학적 충격력과 가속도를 받는다. 이러한 충격거동은 수중운동체의 공중 발사에 중요한 고려 요인이 된다. 본 논문에서는 구명정 모델을 바탕으로 원통형 물체의 입수에 대한 충격거동을 해석하는 근사기법을 제안하였다. 충격력은 von Karman의 운동량 이론으로 계산하고, 운동, 특히 가속도는 유체동력학적 힘의 평형에 의하여 유도된 운동방정식의 수치 적분으로 계산하였다. 제안된 방법은 입수충격을 받는 물체의 초기설계나 운동 해석을 위한 단순하면서도 효과적인 방안이 될 수 있을 것으로 기대된다.

• Steel and Composite Structures
• /
• 제17권5호
• /
• pp.549-560
• /
• 2014

The paper provides the test results and analysis on the behavior of steel 1.7147 at different temperatures. Mechanical uniaxial tests were used to determine mechanical properties, resistance to creep and Charpy impact tests to determine impact energy. Test results are presented in the form of engineering stress-strain diagrams, creep curves as well as numerical data related to impact energy. The results show that the tensile strength has the highest value at room temperature, and the same goes for the yield strength as well as for modulus of elasticity. After room temperature both of mentioned properties decrease with temperature increasing. Some of creep curves were modeled using rheological models and analytical equation. Based on Charpy impact energy an assessment of fracture toughness was made.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1520-1526
• /
• 2002

The Charpy and Izod impact tests are the most prevalent techniques used to characterize the effects of high impulse loads on ploymeric materials. An analysis method for rubber toughened PVC is suggested to evaluate critical dynamic strain energy release rates(G$\_$c/) from the Charpy impact energy measurements. An instrumented Charpy impact tester was used to extract ancillary information concerning fracture parameters in addition to total fracture energies and maximum critical loads. The dynamic stress intensity factor Kid was computed for varying amounts of rubber contents from the obtained maximum critical loads and also toughening effects were investigated as well.

• 대한금속재료학회지
• /
• 제48권10호
• /
• pp.893-900
• /
• 2010

In the present work, the impact loads and their effects on the surface damage under the simultaneous cavitation bubble and solid particle collapses in the sea water have been quantitatively investigated for the austenitic 304 stainless steel by using a vibratory cavitation test device. To do this, angular $SiO_2$ solid particles with an average size of $150{\mu}m$ were dispersed into the test liquid, and the measured impact amplitudes were converted into the impact loads by a steel ball drop test. The maximum impact load was determined to be 28.2 N in the absence of solid particles, but increased to 33.7 N in the presence of solid particles. In addition, the critical impact loads, $L_{crit}$, required to generate pits with sizes greater than $3{\mu}m$ were measured to be 19.6 N and 16.6 N, respectively, for the cavitation bubble collapse and solid particle collapse. As a result of the cavitation erosion test, the incubation time and erosion rate were 1.2 times lower and 1.5 times higher, respectively, by a solid particle collapse compared to those only by the cavitation bubble collapse, indicating a drastic decrease in a resistance to cavitation erosion by the solid particle collapse.

• 대한산업공학회지
• /
• 제8권1호
• /
• pp.40-60
• /
• 1982

Since the first oil embargo (1973), there have been developed many different types of energy-economy interaction models based upon various aspects of energy impact mechanism. We will propose to develop an integrated energy-economy interaction analysis system for less developed countries' energy policy analysis, especially for investment analysis toward constructing energy-saving industry infrastructure ; which is based on the motivation of combined energy models by John P. Weyant. This modeling system can cover the economic growth, inter-industry transactions including production features, and process analysis of energy sector in the total network scheme of general equilibrium, so that it can give many political implications as well as the modeling concept to be used for analyzing various political issues and making decisions related to national energy environment.