• 에너지공학
• /
• 제28권4호
• /
• pp.19-28
• /
• 2019

수직으로 위치한 다공성의 방풍벽을 통과해 흐르는 공기의 난류 유동특성을 해석하였다. 방풍벽은 다수의 원형 단면으로 구성된 공극으로 구성하고, 다공도는 공극의 직경으로 조절하였다. 대부분의 결과는 FLUENT를 이용한 해석결과로 3차원 다공벽 주위의 유동특성을 제시하였으며, 방풍벽에 형성되는 압력분포를 통해 방풍벽의 항력계수를 제시하였다. 항력계수는 레이놀즈 수 및 다공도에 의해 정의되나 레이놀즈 수의 영향은 크지 않은 반면에 다공도에 대한 영향은 매우 크다. 3차원 공극을 갖는 방풍벽의 항력계수를 다공도의 함수로 제시하여 2차원 결과와 비교하였다.

• 한국태양에너지학회 논문집
• /
• 제29권4호
• /
• pp.22-27
• /
• 2009

This study focus on verification of the thermal efficiency of volumetric receiver with 5k Wth Dish-type solar thermal system. Spiral flow path shaped on receiver and working fluid(steam) flow along with this flow path. Porous material for radiation-thermal conversion used in former researches are substituted with the stainless steel wall installed along the spiral flow path. Numerical analysis for the flow path and temperature distributions are carried out. Numerical results are compared with experimental data. Using the numerical model, the heat transfer characteristics of spiral type receiver for dish-type solar thermal systems are known and the thermal performance of the receiver can be estimated.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.769-775
• /
• 2022

Global efforts to reduce carbon emissions have focused attention on the development of hydrogen energy and the development of various hydrogen mobility requires mobile hydrogen charging stations. In this study, the flow characteristics of the flow control hydrogen valve for mobile hydrogen charging equipment were studied according to the temperature change of hydrogen gas. The inlet pressure was 100 MPa, the outlet pressure to 70 MPa, and temperature condition was set -40℃ to 85℃. As a result, the difference in the valve flow coefficient, which determines the capacity of the valve, showed a difference within 5% depending on the temperature.

• 한국태양에너지학회 논문집
• /
• 제33권1호
• /
• pp.1-6
• /
• 2013

It is difficult to avoid measurement errors caused by the shading effect of the meteorological tower, which is used for wind resource assessment according to the IEC Standard. This paper presents a validation of the computational flow analysis results by comparing the results with the wind tunnel experiment conducted for Reynolds numbers in the $10^4$ to $10^5$ range, for the preparation of a database for use in an automatic method of correcting met-tower shading errors. A three-dimensional simulation employing the MP (Modified Production) $k-{\varepsilon}$ turbulence model predicted a wind speed deficit in the wake region according to minimum wind speed ratio, within an MAE (Mean Absolute Error) of 2.4%.

• 한국대기환경학회지
• /
• 제26권2호
• /
• pp.234-240
• /
• 2010

Gas flow uniformity is an important factor to guarantee particle removal performance of electrostatic precipitators (EP), and the gas flow uniformity is evaluated by a fraction of standard deviation to the mean of gas flow distribution (%RMS) or a technical standard, ICAC EP-7, provided by The Institute of Clean Air Companies. In this study, relationship between the ICAC EP-7 and %RMS in evaluation of gas flow uniformity was investigated in terms of flow velocity. The maximum values of %RMS for gas velocity distribution of normal distribution has been obtained, and the maximum values of %RMS with gas velocity distribution satisfying ICAC EP-7 standards were also evaluated. With gas flow distribution obtained from CFD analysis and physical model test of real EP, %RMS values were calculated and it was tested if those gas flow distribution satisfy the criteria specified in ICAC EP-7. The %RMS values satisfying criteria of ICAC have been appeared to have similar values with %RMS values calculated with normal distribution of gas velocities.

• 에너지공학
• /
• 제21권4호
• /
• pp.419-426
• /
• 2012

본 연구에서는 기기 스케일 2상 유동(Two-phase flow) 해석 코드 CUPID를 사용하여 CANDU 원자로의 칼란드리아 용기 내부 감속재의 열수력 거동을 분석하기 위한 사전연구를 수행하였다. 먼저, Stern 연구소에서 수행한 단상유동 실험 3종류를 이용하여 CUPID 코드를 검증하였다. 칼란드리아 관다발 영역 격자생성의 복잡성을 피하기 위하여 다공성 매질 모델을 해당 영역에 적용하였고, 다공성 매질 영역의 유동 저항은 실험에서 얻은 관계식을 이용하여 계산하도록 하였다. 계산결과, CUPID 코드는 칼란드리아 용기 내부의 강제 및 자연 대류의 혼합 유동 양식을 성공적으로 예측하였다. 다음으로 2상 유동이 발생하는 경우를 해석하였다. 이들 계산을 통해 CUPID 코드의 CANDU 원자로 감속재 해석 능력을 보였다. 또한, 국부 과냉각 여유도를 예측하는데 사용할 수 있는 유입유량 대비 칼란드리아 용기의 국부 최대 감속재 온도 그래프를 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.311-318
• /
• 1998

In this paper, the power flow analysis(PFA) method is applied to the prediction of the vibrational energy density and intensity of coupled co-planar plates. To cover the energy transmission and reflection at the joint of the plates, the wave transmission approach is introduced with the assumption that all the incident waves are normal to the joint. By changing the frequency ranges and internal loss factors, we have obtained the PFA results, and compared them with the analytical exact solutions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1177-1184
• /
• 2002

In this paper, power flow analysis method on the various types of thin shell has been developed to solve vibrational Problems in the medium to high frequency ranges. Energy governing equations have been derived both for out-of plane and in-plane waves in thin shell. These results have been numerically applied to predict the vibrational energy density and intensity distributions of cylindrical, spherical and doubly-curved shells.

• 한국지열·수열에너지학회논문집
• /
• 제7권1호
• /
• pp.32-37
• /
• 2011

In this study, control characteristics and energy performance with flow rate control methods were reviewed with the simulation. The heating system is classified such as fan coil unit and HVAC system currently used in buildings with valve control and pump inverter control. The simulation analysis program is made by TRNSYS ver. 15 with the actual data. As a result of this study, the central heating system with pump inverter control decreases electricity energy and reduces gas consumption. Inverter control method shows better performance in comparison with valve control one for energy saving.

• 한국수소및신에너지학회논문집
• /
• 제25권3호
• /
• pp.319-335
• /
• 2014

This study attempts to suggest an economic analysis model for SNG projects, which can reflect the future uncertainty objectively and applies the real option valuation incorporating the flexible investment decision. Based on this analysis model, net present value and internal rate of return were estimated by using preliminary feasibility study report of SNG project. And economic evaluation of SNG project was performed with real option valuation using binomial option model. Through this, the difference of analysis results between the real option valuation model and the discounted cash flow model were compared and the usefulness of the real option valuation model was confirmed. From the actual proof analysis, it is confirmed that the real option valuation model showed higher SNG project value than the discounted cash flow model did. It was confirmed that by applying the real option valuation model, economic analysis can be performed on not only the current straightforward SNG project, but also various future portfolios having options such as expansion, modification, or decommission.