Transactions of the Korean hydrogen and new energy society (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지
DOI QR코드

DOI QR Code

A Numerical Analysis Study of Hydrogen Valve to Flow Characteristics by Fluid Temperature Variation for Mobile Charging Equipment

이동식 수소 충전 장비용 수소 밸브의 유체 온도 변화에 따른 유동 특성의 수치해석적 연구

  • JUNYEONG, KWON (Technical Center for High-Performance Valve, Dong-A University) ;
  • SEUNGJUN, OH (Technical Center for High-Performance Valve, Dong-A University) ;
  • JEONGJU, CHOI (Department of Mechanical Engineering, Dong-A University) ;
  • YONGKI, KIM (TK-FUJIKIN CORPORATION)
  • 권준영 (동아대학교 고기능성밸브 기술지원센터) ;
  • 오승준 (동아대학교 고기능성밸브 기술지원센터) ;
  • 최정주 (동아대학교 기계공학과) ;
  • 김용기 (태광후지킨 주식회사)
  • Received : 2022.11.09
  • Accepted : 2022.12.12
  • Published : 2022.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

Global efforts to reduce carbon emissions have focused attention on the development of hydrogen energy and the development of various hydrogen mobility requires mobile hydrogen charging stations. In this study, the flow characteristics of the flow control hydrogen valve for mobile hydrogen charging equipment were studied according to the temperature change of hydrogen gas. The inlet pressure was 100 MPa, the outlet pressure to 70 MPa, and temperature condition was set -40℃ to 85℃. As a result, the difference in the valve flow coefficient, which determines the capacity of the valve, showed a difference within 5% depending on the temperature.

Keywords

Acknowledgement

본 연구는 산업통상자원부/한국산업기술진흥원의 지원으로 수행되었다(과제번호 P170600022).

References

  1. Future Vision and Strategy Bureau, "2050 carbon neutral strategy of the republic of Korea", Ministry of Economy and Finance, 2020. Retrieved from https://www.korea.kr/archive%20expDocView.do?docId=39241. 
  2. I. H. Choi, T. I. Ha, and H. S. Kim, "Durability assessment by structural and fatigue analysis of flow control valves (FCVs) for hydrogen refueling stations", Trans. Korean Hydrogen New Energy Soc, Vol. 33, No. 3, 2022, pp. 240-246, doi: https://doi.org/10.7316/KHNES.2022.33.3.240. 
  3. International Organization for Standardization (ISO), "ISO 19880-3:2018. Gaseous hydrogen - Fuelling stations - Part 3: Valves", ISO, 2018. Retrieved from https://www.is-o.org/standard/64754.html. 
  4. C. W. Nam, R. M. Kim, and H. H. Kim, "A numerical study of flow control valve to flow characteristics by pressure difference for hydrogen station", Journal of the Korean Institute of Gas, Vol. 25, No. 2, 2021, pp. 28-33, doi: https://doi.org/10.7842/kigas.2021.25.2.28. 
  5. J. Ye, J. Cui, Z. Hua, J. Xie, W. Peng, and W. Wang, "Study on the high-pressure hydrogen gas flow characteristics of the needle valve with different spool shapes", International Journal of Hydrogen Energy, 2022, doi: https://doi.org/10.1016/j.ijhydene.2022.04.073. 
  6. ANSYS, "ANSYS fluent theory guide (Release 15.0)", ANSYS Inc. and SAE IP Inc., 2013. Retrieved from http://www.pmt.usp.br/academic/martoran/notasmodelosgrad/ANSYS%20Fluent%20Theory%20Guide%2015.pdf. 
  7. H. K. Versteeg and W. Malalasekera, "An Introduction to Computational Fluid Dynamics: The finite volume method(2nd ed.)", Pearson Education Ltd., England, 2007. Aetrieved from http://ftp.demec.ufpr.br/disciplinas/TM702/Versteeg_Malalasekera_2ed.pdf. 
  8. E. Brazda, "ISA75.02, Control Valve Capacity Test Procedures", International Society of Automation (ISA), 2008. Retrieved from https://www.isa.org/standardsandpublications/isa-standards/isa-standard-scommittees/isa75-02. 
  9. ISO, "ISO 198801:2020. Gaseous hydrogen - Fuelling stations - Part 1: General requirements", ISO, 2020. Retrieved from https://www.iso.org/standard/71940.html. 
  10. SAE International, "Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles. J2601_202005", SAE International, 2020. Retrieved from https://www.sae.org/standards/content/j2601_202005/.