• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1410-1419
• /
• 2023

Public perception plays a crucial role in the successful completion of a nuclear power project. As a newcomer country to nuclear power, there are lots of misconceptions among the Bangladeshi people about nuclear energy. Consequently, it is crucial to minimize all the doubts among mass people and build up their positive outlook toward nuclear power. This demands a comprehensive survey to figure out the public opinion, concerns, false impressions, and knowledge gap regarding nuclear power. In the present study, these issues were addressed by a survey that was responded to by 661 persons for the 24 survey questions. The questions were categorized based on information, knowledge, faith, benefit, awareness, and technology. Feedback and responders' basic demographic and socioeconomic information were collected from various locations in Bangladesh through online and in-person surveys. The responses were analyzed in both statistical and descriptive ways. Some of the feedback was found to vary with age, sex, and education level while others were quite independent of these parameters. It is found that socioeconomic development and energy security can be achieved by the inclusion of nuclear energy in the power system master plan of the country. However, huge knowledge gaps and misconceptions were found among the public regarding nuclear energy. As per feedback, political instability and corruption may affect the national nuclear power project in Bangladesh. Low faith in the existing rules & regulations for nuclear power programs was also observed. The result of this study will be handy to develop the communication and public awareness strategy for a successful nuclear power project in Bangladesh.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.176-184
• /
• 2000

TDC(Time Delay Control) deals with the time-varying system parameters, unknown dynamics and unexpected disturbances using time delay. TDC can be divided into two separate parts: an auxiliary controller and a servo controller. The two controllers can be designed independently. The auxiliary controller is used to reduce sensitivity to parameter variations, nonlinear effects, and other disturbances. The servo controller is to reduce the error between the desired command and output. We propose the model-following time delay controller with modified error feedback controller. This was applied to follow the desired reference model for the uncertain time-varying overhead crane. The model generates the damped-out swinging motion trajectory to suppress the swinging motion caused by the acceleration and the deceleration of crane transportation. The control performance was evaluated through simulations. The theoretical results indicate that this control method shows excellent performance to an overhead crane with the uncertain time-varying parameters.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.829-840
• /
• 2013

The modified sinusoidal pulse-width modulation (SPWM) is one of the PWM techniques used in three-phase AC-DC buck converters. The modified SPWM works without the current sensor (the converter is current sensorless), improves production of sinusoidal AC current, enables obtainment of near-unity power factor, and controls output voltage through modulation gain (ranging from 0 to 1). The main problem of the modified SPWM is the huge starting current and voltage (during transient) that results from a large step change from the reference voltage. When the load changes, the output voltage significantly drops (through switching losses and non-ideal converter elements). The single-input single-output (SISO) approach with minor-loop voltage feedback controller presented here overcomes this problem. This approach is created on a theoretical linear model and verified by discrete-model simulation on MATLAB/Simulink. The capability and effectiveness of the SISO approach in compensating start-up current/voltage and in achieving zero steady-state error were tested for transient cases with step-changed load and step-changed reference voltage for linear and non-linear loads. Tests were done to analyze the transient performance against various controller gains. An experiment prototype was also developed for verification.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.469-478
• /
• 2015

In order to promote the application of switched reluctance machines (SRM) in electric vehicles (EVs), the braking torque closed-loop control of a SRM is proposed. A hysteresis current regulator with the soft chopping mode is employed to reduce the switching frequency and switching loss. A torque estimator is designed to estimate the braking torque online and to achieve braking torque feedback. A feed-forward plus saturation compensation torque regulator is designed to decrease the dynamic response time and to improve the steady-state accuracy of the braking torque. The turn-on and turn-off angles are optimized by a genetic algorithm (GA) to reduce the braking torque ripple and to improve the braking energy feedback efficiency. Finally, a simulation model and an experimental platform are built. The simulation and experimental results demonstrate the correctness of the proposed control strategy.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.39-47
• /
• 2018

Recently, as environmental regulations for earth-moving equipment have been tightening, advanced systems such as electronic control, have been introduced for energy savings. An IMV (Independent Metering Valve) consisting of four 2-way valves, is an electro-hydraulic control systems that provides more flexible controllability, and potential for energy savings in excavators, when compared to the conventional 4-way spool valve system. To fully maximize use of an IMV, the bi-directional flow control valve that can regulate a large amount of flow in both directions, should be adopted. The hydraulic circuit of an IMV applied to an excavator from an overseas construction equipment company, reveals the flow control valve with the compound of proportional solenoid valve for first stage, and 2-way spool valve for the second stage. Moreover, the two spools are interconnected by a feedback spring, presumed to compensate for flow force acting on the second stage spool. This paper addresses the static analysis of flow control valve in an IMV to investigate the improvement of robustness, against flow force by the feedback spring. From the steady-state analysis of flow control valve model, it can be concluded that the feedback spring facilitates maintaining linearity of spool displacement for control input, and relatively constant flow for load disturbance.

• 대한인간공학회지
• /
• 제31권6호
• /
• pp.725-731
• /
• 2012

Objective: The aim of this study is to investigate visual feedback effects and human performance in the foot mouse control. Background: Generally, computer mouse tasks are controlled by visual feedback. In order to understand the characteristics of a foot mouse control, it is important to investigate the patterns of visual feedback involved in foot-mouse control tasks. Human performance of foot mouse control is also an important factor to understand the foot mouse control. Method: Three types of mouse control were determined to investigate visual feedback effects and human performance in the foot mouse control. Visual feedback effects in the foot mouse control were compared with those of a typical hand mouse. The cursor movement speed and mental workload were measured in the three types of tasks and two types of mouses. Results: Mouse control tasks with an element of homing-in to the target were more quickly performed by the hand mouse than the foot mouse. Mental workload was also higher in the foot mouse than the hand mouse. However, in the steering movement, human performance of the foot mouse control was not lower than that of the hand mouse control. Visual feedback in the foot mouse control was less required than in the hand mouse control. Conclusion: The foot mouse was not efficient in the most mouse control tasks, compared to the hand mouse. However, the foot mouse was efficient in the steering movement, moving a cursor within a path with lateral constraints. Application: The results of this study might help to develop the foot mouse.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.413-418
• /
• 1995

A computer code to simulate the letdown system was developed to analyze the hydrodynamic transients. It was found that valve plug characteristics have a significant effect on the system stability, and that the plant specific valve control system setpoints should be determined based on the characteristics of procured valves by using a simulation code, before performing the plant startup test. The letdown system instability was evaluated for the feedback to the design of future plants.

• 드라이브 ㆍ 컨트롤
• /
• 제13권4호
• /
• pp.31-44
• /
• 2016

In recent hydraulic actuation systems, conventional hydraulic spool valves with pressure compensators are becoming less popular, after the introduction of the independent metering concept for valves. Within this concept, four valves are needed for actuating a single cylinder. Subsequently, this increases the freedom of controlling both chamber pressures of the cylinder, and it then provides for electronically-controlled pressure compensation facilities. Additionally, this has the potential to save valuable energy. The primary focus of this paper is to develop a new generation of hydraulic circuits using the independent metering valve (IMV). This configuration can function well as a conventional IMV circuit while providing better pressure control. We first describe the working principles of five distinct modes of the proposed IMV system. Then, mathematical models for each working mode are presented. Finally, we present numerical simulations that have been carried out to evaluate the system performance, in comparison with that of the conventional IMV configuration. The simulation results demonstrate that the performance of the new IMV configuration is superior to the conventional IMV system in terms of energy savings.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.651-654
• /
• 1989

A rate equation model describing the ultrashort pulse formation is presented. The temporal and energy behavior of the distributed feedback dye laser predicted by the model has been compared the earlier papers on DFDL's. The observed good agreement allows application of the theoretical model for picosecond laser.

• 한국정보통신학회논문지
• /
• 제8권4호
• /
• pp.946-949
• /
• 2004

분포궤환 색소레이저(DFDL： Distributed feedback Dye Laser)로부터 80 uJ의 단일 극초단 펄스를 얻고, 이를 2단의 증폭기와 betune cell에 의한 다단 증폭으로 높은 출력을 얻은 후 BBO를 사용, 자외선 영역의 제 2고조파를 얻었다.