• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.595-596
• /
• 2004

Based on the systems and devices which are being developed in the KNICS project, the data communication network (DCN) which is an essential element for the interfaces among the I&C systems. is designed. The traffic load for each network is calculated at the expected maximum traffic condition. The result shows that the utilizations of all networks satisfy the design requirements.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.305-310
• /
• 1996

This paper concerns the cladding residual stresses in a reactor vessel induced during cooling from the manufacturing temperature down to room temperature Finite element results show that very large stress gradients are present at the interface corner and such stress singularity might lead to local yielding or cladding-base metal debonding.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.105-105
• /
• 2009

• 전산구조공학
• /
• 제1권1호
• /
• pp.67-78
• /
• 1988

이 연구에서는 새로운 쉘요소분해의 방법을 정립하고, 이에 의거하여 간단하고, 효율성이 높고, 보편성이 큰 쉘 유한요소를 개발하고자 하였다. 실제의 요소는 개념적인 Translational Element와 Difference Element로 분해되며, 요소의 변위함수는 이 두 성분요소의 변위함수를 결합하여 얻는다. 요소분해의 기본가정을 달리함에 따라서 세가지의 기본형요소에 도달할 수 있다. 기본형요소를 보완하여 Locking현상을 제거하고 수렴성을 높히는 방안으로서 감착적분, 내용자유도의 추가 및 Mixed Fomulation을 검토하였으며, 요소의 Spurious Mode를 제어하는 방법을 고안하였다. 수치분석을 통해서 요소의 유효성과 효율성을 검정하였다.

• 한국강구조학회 논문집
• /
• 제16권3호통권70호
• /
• pp.295-303
• /
• 2004

본 연구에서는 등방성 및 복합적층판 해석을 위해 추가변형률을 갖는 개선된 4절점 Reissner-Mindlin 평판휨요소를 제안하였다. 전단잠김현상과 가상적인 제로에너지모드를 제거하기 위해 비적합 변위모드와 Bubble 함수식에 근거한 새로운 형태의 전단변형률을 추가함으로써 횡방향 전단거동을 개선하였다. Andelfinger와 Ramm(1993)이 제시한 기본적인 추가변형률은 면내거동을 개선시키고자 그대로 적용하였다. 1차전단변형이론에 근거한 새로 개발된 4절점 평판요소를 '14EASP'라 명하였다. 14EASP 유한요소의 특징과 성능을 평가하고자 몇가지의 수치해석예제를 적용하였으며, 다른 유한요소 및 해석적인 해와 비교하였다. 그 결과 본 연구에서 제안한 14EASP는 보다 안정적이고, 수렴성이 빠르며, 특히 요소형상이 왜곡된 경우에도 정확한 결과를 도출하였다.

• Structural Engineering and Mechanics
• /
• 제16권6호
• /
• pp.655-674
• /
• 2003

Investigated in this study are the natural vibration characteristics of the coaxial cylindrical shells coupled with a fluid. Theoretical method is developed to find the natural frequencies of the shell using the finite Fourier series expansion, and their results are compared with those of finite element method to verify the validation of the method developed. The effect of the fluid-filled annulus and the boundary conditions on the modal characteristics of the coaxial shells is investigated using a finite element modeling.

• 소성∙가공
• /
• 제11권2호
• /
• pp.179-186
• /
• 2002

In the finite element analysis of metal forming Processes using general Lagrangian formulation, element nodes in the mesh move and elements are distorted as the material is deformed. The excessive degeneracy of mesh interrupts finite element analysis and thus increases the error of plastic deformation energy, In this study, a remeshing scheme using so-called mesh compression method is proposed to effectively analyze the flash which is generated usually in hot forging processes. In order to verify the effectiveness of the method, several examples are tested in two-dimensional and three-dimensional problems.

• 소성∙가공
• /
• 제3권4호
• /
• pp.468-481
• /
• 1994

Mathematical description of arbitrarily-shaped tool surface are introduced by parametric patch approaches along with the related contact search algorithm. In order to maintain the advantages of membrane elements and to incoporate the bending effect, a BEAM(Bending Energy Augmented Membrane) element is proposed. Computation are carried out for some complex axisymmetric multi-stage deep drawing to verify the validity and the effectiveness of the proposed method.

• 한국철도학회논문집
• /
• 제6권3호
• /
• pp.174-178
• /
• 2003

This paper presents the development of 2-dimensional discrete element algorithm to generate circle and line elements for the simulation of the ballast and sleeper in railway. An example of randomly distributed circle elements show a good applicability of this algorithm for the modeling of the behaviors of ballast. The output about unbalaned force, particle velocity, and total energy conservation from the code is evaluated to check if the calculation is conducted properly.

• Structural Engineering and Mechanics
• /
• 제14권1호
• /
• pp.1-20
• /
• 2002

Investigated in this study are the modal characteristics of the eccentric cylindrical shells with fluid-filled annulus. Theoretical method is developed to find the natural frequencies of the shell using the finite Fourier expansion, and their results are compared with those of finite element method to verify the validation of the method developed. The effect of eccentricity on the modal characteristics of the shells is investigated using a finite element modeling.