• 한국항행학회논문지
• /
• 제20권5호
• /
• pp.408-416
• /
• 2016

본 연구에서는 선내 수집데이터를 활용하는 선박 및 육상 서비스를 위한 선박용 어플리케이션 시스템과 해상 데이터 통합관리 및 상호교환을 위한 선육 간 통합 시스템을 활용한 선박 에너지효율 모니터링 시스템을 설계하였다. 선박 에너지효율 모니터링 시스템은 윈도우 기반의 응용프로그램으로 file base EDI 통신을 이용하도록 구성하였다. 주요기능으로 연료소모량 최소화를 위한 항로 계획, 에너지 소모 및 배출가스 배출 모니터링, 선박 에너지 효율 분석 및 분석데이터 분석을 구현하고 실 운항선박에 적용하여 시스템의 정상 동작을 확인하였다.

• Journal of Communications and Networks
• /
• 제9권4호
• /
• pp.473-481
• /
• 2007

Energy efficiency is one of the most critical concerns for wireless sensor networks. By allowing sensor nodes in close proximity to cooperate in transmission to form a virtual multiple-input multiple-output(MIMO) system, recent progress in wireless MIMO communications can be exploited to boost the system throughput, or equivalently reduce the energy consumption for the same throughput and BER target. However, these cooperative transmission strategies may incur additional energy cost and system overhead. In this paper, assuming that data collectors are equipped with antenna arrays and superior processing capability, energy efficiency of relevant traditional and cooperative transmission strategies: Single-input-multiple-output(SIMO), space-time block coding(STBC), and spatial multiplexing(SM) are studied. Analysis in the wideband regime reveals that, while receive diversity introduces significant improvement in both energy efficiency and spectral efficiency, further improvement due to the transmit diversity of STBC is limited, as opposed to the superiority of the SM scheme especially for non-trivial spectral efficiency. These observations are further confirmed in our analysis of more realistic systems with limited bandwidth, finite constellation sizes, and a target error rate. Based on this analysis, general guidelines are presented for optimal transmission strategy selection in system level and link level, aiming at minimum energy consumption while meeting different requirements. The proposed selection rules, especially those based on system-level metrics, are easy to implement for sensor applications. The framework provided here may also be readily extended to other scenarios or applications.

• 에너지공학
• /
• 제24권3호
• /
• pp.115-121
• /
• 2015

본 논문은 수요 자원으로 활용이 가능한 조명제어 시스템을 연구하였다. 기존의 조명제어 알고리즘은 에너지수요에 관계 없이 에너지량을 절감하거나 수요자원으로 활용하기 위하여 수용가의 불편을 감수하면서 강제적으로 조명을 차단하는 알고리즘을 사용하고 있다 이 논문에서는 사용자의 근무 괘적성을 유지하면서도 수요자원으로서 활용이 가능한 새로운 조명제어 알고리즘을 제시하고, 시뮬레이션을 통하여 유용성을 검증하였다.

• KIEAE Journal
• /
• 제16권5호
• /
• pp.39-45
• /
• 2016

Purpose: The purpose of this study is to analyze the energy saving and cost benefit analysis of the Low-income Energy Efficiency Treatment Program supported by KOREF(Korea Energy Foundation). This program was launched in 2007 and performs building energy retrofit for the low-income and energy poverty houses. Method: Energy simulation and cost benefit analysis were accomplished for the low-income detached houses. The structure of detached house was a lot og block structure, wood frame (single glass) and concrete roof. Baseline model of the low-income detached houses was proposed. Result: Annual heating energy consumptions were decreased by about 3.2% with the window system replacement(Case 1), 9.3% with reinforcement of insulation(Case2), and 12.5% with both(Case 3) compared to those of baseline model. The construction cost will be recouped within 5 years for the Case 1, 3 years for the Case 2, and 3 years for the Case 3. Case 3 was the most cost beneficient construction method in the analyzed cases in this study.

• 한국태양에너지학회 논문집
• /
• 제21권1호
• /
• pp.11-20
• /
• 2001

In this paper described common MPPT(Maximum Power Point Tracking) control algorithm; Constant Voltage Control, P&O(Perturbation and Observation), IncCond(Incremental Conductance), and investigated it's efficiency. Through simulation and efficiency evaluation, analyze the steady/transient states characteristics and efficiency of control algorithms respectively. Also, To high-efficiency proposed Two-mode MPPT control for improve on the existing control algorithm. Moreover, this paper suggested a topology for MPPT measuring efficiency and a method of examination.

• 한국분무공학회지
• /
• 제29권1호
• /
• pp.1-6
• /
• 2024

This paper is a numerical analysis study for evaluating the energy efficiency of electric vehicles. Currently, the methods for testing and evaluating the energy consumption efficiency of electric vehicles have limitations such as resources and time. Therefore, there is a need for research on developing models to predict the energy consumption efficiency of electric vehicles. In this study, a numerical analysis research is conducted to predict the energy efficiency of electric vehicles using a vehicle dynamics numerical analysis model. To validate the accuracy of the simulation model, it is compared the results of dynamometer tests with the simulation results and used the Unified Diagnostic Services (UDS) protocol to acquire internal data from the electric vehicle. It is ensured the reliability of the simulation model by comparing data such as motor speed, battery voltage, current, state of charge (SOC), regenerative braking power generation, and total driving distance of the test vehicle with dynamometer test data and simulation model results.

• 사물인터넷융복합논문지
• /
• 제7권3호
• /
• pp.9-14
• /
• 2021

본 논문에서는 주택이나 건물의 단열 진단을 통하여 에너지 손실 요인을 발견하고 이에 따른 에너지 효율 개선에 대한 방향을 제시하고 있다. 건축물의 에너지 효율 요소는 단열 진단, 열교 진단, 창호 진단, 기밀 진단, 설비 진단 등으로 구성된다. 에너지 복지 사각지대 주민 및 시설 중 전라남도 나주시에 위치한 한 경로당 건물을 대상으로 하여 에너지 효율 진단을 실시하고 단열 시공을 한 후의 에너지 효율 진단을 실시하였다. 에너지 측정과 진단 및 분석은 IoT 기반 통합 유무선 에너지 진단 플랫폼인 에너지 파인더를 이용하였다. 비교 결과 전체적으로 16.38%의 에너지 절감률을 달성하였다. 연간 단위 면적당 난방 에너지 소요량은 시공 전 333.51kWh에서 시공 후 277.35kWh로 감소되었고, 연간 단위 면적당 냉방 에너지 소요량은 시공 전 5.51kWh에서 시공 후 5.22kWh로 감소되었다. 연간 단위 면적당 1차 에너지 소요량은 시공 전 464.52kWh 였으나 시공 후 403.69kWh로 감소되었으며, 연간 에너지 사용 비용은 시공 전 3,063,307.14원이었으나 시공 후 2,641,072.49원으로 절감되었다. 단열 이외의 에너지 효율에 영향을 미치는 기준들에 대한 추가적인 개선 작업이 필요하다고 판단된다.

• ETRI Journal
• /
• 제33권3호
• /
• pp.299-309
• /
• 2011

Energy consumption is a key issue in body sensor networks (BSNs) since energy-constrained sensors monitor the vital signs of human beings in healthcare applications. In this paper, packet size optimization for BSNs has been analyzed to improve the efficiency of energy consumption. Existing studies on packet size optimization in wireless sensor networks cannot be applied to BSNs because the different operational characteristics of nodes and the channel effects of in-body and on-body propagation cannot be captured. In this paper, automatic repeat request (ARQ), forward error correction (FEC) block codes, and FEC convolutional codes have been analyzed regarding their energy efficiency. The hop-length extension technique has been applied to improve this metric with FEC block codes. The theoretical analysis and the numerical evaluations reveal that exploiting FEC schemes improves the energy efficiency, increases the optimal payload packet size, and extends the hop length for all scenarios for in-body and on-body propagation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.2046-2047
• /
• 2007

This paper is about the energy efficiency calculation of operating electric motors in production facilities. The most important 1st step to efficient operation of plants is the evaluation of the energy efficiency of the production facilities in that plant. Through this procedure, we can decide that which facilities i.e. induction motors, in this paper, should do maintenance or not. There are mainly 2 types of energy which are used in production facilities, the one is electric energy and the other is heat energy but in order to make calculation simple, in this paper, we are only focusing on electric energy, efficiency and energy loss of the electric motors under operation conditions. As a case study, we chose electric motors in a certain process in a production facilities, and calculated efficiency and loss by using measured data.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.552-560
• /
• 2008

In 1997, Korean government established the National Energy and Resources Plan, which targeted from 1997 to 2005 with strategic energy technology development. At the end of 2005, Korean government built a New National Energy and Resources Plan preparing for upcoming 10 years from 2006 until 2015 based on energy technology trees comparing with the previous plan, which based on the energy R&D projects. In this research, we prioritize the relative preferences and efficiency by an AHP/DEA CCR-I and BCC-I integrated model approach considering scale efficiency for well focused R&D and efficiency of developing Greenhouse Gas technologies as an extended research from a view point of econometrics as an extended research.