• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.11
• /
• pp.1547-1551
• /
• 2011

Bakery waste (BW) is much cheaper than barley (20 to 40% the price of barley). Bakery waste and barley grain have similar chemical composition; they contain 99 and 97% organic matter (OM), 1.1 and 1.8% fat, 18 and 15% neutral detergent fibre (NDF) and 14.0 and 14.5% crude protein (CP), respectively (DM basis). The objectives of this study were to determine the effect of substituting BW for barley grain in high concentrate fattening diets for lambs on nutrient intake, growth and carcass characteristics. Forty Awassi lambs (21.75${\pm}$1 kg) weaned at the age of 65 days were assigned randomly to four experimental fattening diets differing in BW ratio in a completely randomized design. The control diet (CON) contained 20, 60, 11, 7, and 2% (DM basis) wheat straw, barley grain, soybean meal, corn grain, and minerals and vitamin mix, respectively. Bakery waste substituted barley grain by 10, 20 and 30% of the diet DM in the LBW, MBW and HBW diets, respectively. The experiment lasted for 56 days. Dry matter intake (DMI) decreased (p<0.05) in LBW diet compared to the CON diet by approximately 10%. No further reduction in DMI was observed with the higher substitution levels. Metabolizable energy intake for the CON diet (3.6 Mcal/d) was also reduced (p<0.05) compared with LBW, MBW and HBW diets (3.4, 3.4 and 3.3 Mcal/d, respectively). Final body weight for lambs fed the CON diet (34.8 kg) was higher (p<0.05) compared with lambs fed the LBW, MBW and HBW diets (30.6, 32.0 and 31.1 kg, respectively). Growth rate for lambs fed the CON diet (232 g/d) was also higher (p<0.05) compared to lambs fed the LBW, MBW and HBW diets (170, 189, and 167 g/d, respectively). Feed to gain ratio was higher (p<0.05) for lambs fed the LBW, MBW and HBW diets (7.2, 6.6 and 7.3, respectively) compared with lambs that consumed the CON diet (5.7). Body weight gain cost was reduced by approximately 8% by the MBW and HBW diets as compared with the CON diet. Dressing percentage, full gut weight, empty gut weight and liver weights were all unaffected by the BW addition to the diets and averaged 48.9%, 6.8 kg, 2.8 kg and 0.444 kg, respectively. However, fat tail weight was increased (p<0.05) with the higher levels of the BW inclusion. In conclusion, substituting BW for barley grain reduced DMI and growth performance. However, when BW substituted barley grain at the 20 and 30% of the diet DM, body weight gain cost was reduced by approximately 8%.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.399-406
• /
• 2017

CaO-based by-product, which consist of CaO, $SO_3$, $Al_2O_3$ and so on, has being used to raw materials of CaO compound. When It was applied to recycling water of remicon, concrete performance can be enhanced because hydration reaction of powder material is accelerated. In this study, activated-sludge, which was putted desulfurization gypsum of CaO-based in recycling water, was manufactured to verify effect of them, and then they was investigated by characteristics of cement matrix and mortar. As a results, they indicated reduction of setting time and high soundness in cement matrix, and acceleration of hydration reaction can be verified by XRD analysis. Also, it can be maintained good workability if water content by usage of desulfurization gypsum, which used for production of activated-sludge, was adjusted. In addition, it can be verified strength development by activated-sludge although cement content by usage of desulfurization gypsum was reduced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.23-23
• /
• 2009

GaN-based nitride semiconductors have attracted considerable attention in high-brightness light-emitting-diodes (LEDs) and laser diodes (LDs) covering from green to ultraviolet spectral range. LED and LD heterostructures are usually grown on (0001)-$Al_2O_3$. The large lattice mismatch between $Al_2O_3$ substrates and the GaN layers leads to a high density of defects(dislocations and stacking faults). Moreover, Ga and N atoms are arranged along the polar [0001] crystallographic direction, which leads to spontaneous polarization. In addition, in the InGaN/GaN MQWs heterostructures, stress applied along the same axis can also give rise to piezoelectric polarization. The total polarization, which is the sum of spontaneous and piezoelectric polarizations, is aligned along the [0001] direction of the wurtzite heterostructures. The change in the total polarization across the heterolayers results in high interface charge densities and spatial separation of the electron and hole wave functions, redshifting the photoluminescence peak and decreasing the peak intensity. The effect of polarization charges in the GaN-based heterostructures can be eliminated by growing along the non-polar [$11\bar{2}0$] (a-axis) or [$1\bar{1}00$] (m-axis) orientation instead of thecommonly used polar [0001] (c-axis). For non-polar GaN growth on non-polar substrates, the GaN films have high density of planar defects (basal stacking fault BSFs, prismatic stacking fault PSFs), because the SFs are formed on the basal plane (c-plane) due to their low formation energy. A significant reduction in defect density was recently achieved by applying blocking layer such as SiN, AlN, and AlGaN in non-polar GaN. In this work, we were performed systematic studies of the defects in the nonpolar GaN by conventional and high-resolution transmission electron microscopy.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.107-114
• /
• 2018

Purpose : This study is to develop walls using wall recording technology applied on roofs to prevent fire spread in traditional markets. Method : The spray head installed on the developed wall was designed so that the fire does not spread to adjacent buildings after being used for plants. In addition, a spray head was attached to the upper section and some sections for the growth of plants planted on the wall to prevent the spread of fire. Results : These technologies suggested the development of walls that can be installed at the upper level of buildings, such as traditional markets, and separate isolation facilities were not necessary because they are integrated with structures and sprinklers. In addition, sprinklers can perform both the plant spray and fire spread prevention functions. It is believed that this is the only alternative technology proposed in Korea to prevent the spread of fire. Conclusion : In this study, the wall design, designed directly to derive the quantitative performance of the fire spread reduction effect, demonstrated the fire suppression method of the wall system, the durability of the wall itself, and the flame retardability performance.

• Journal of the Korean earth science society
• /
• v.31 no.6
• /
• pp.541-554
• /
• 2010

Fifteen min-microtremor data sets were collected at 136 sites from a coastal area of Kunsan and 117 sites from an inland area of Jeonju located in SW Korea, and were analyzed for the HVSR (Horizontal to Vertical Spectral Ratio) of the sites. The microtremor spectra of the coastal area have stronger energy in the lower frequency range from 1-6 Hz than those of the coastal area. This result can be attributed to the effect of the waves and tides in the Keum river and the Yellow sea. Twenty four hours of measurement of the microtremor indicated that the microtremor spectrum correlates with the human activities, but the microtremor HVSR peak was observed consistently at the characteristic frequency for the site. The HVSR peaks were grouped into 4 types -"single peak", "double peak", "broad peak" or "no peak"- based on their shapes. More than 90% of the data sets exhibit peak frequencies ($F_0$) which can be easily identified. The distribution of $F_0$ reveals a close relationship with the topography and local geology of the areas, exhibiting high F0s in the hillside areas and low $F_0s$ in the reclaimed land area. While the amplitudes of microtremor HVSR peak frequencies are less than 4 in the downstream of the inland area, those of the recently reclaimed land in the coastal area are extremely high (more than 10). The results of this study indicate that detailed HVSR studies are essential for the earthquake hazard reduction of reclaimed lands.

• Korean Journal of Poultry Science
• /
• v.33 no.3
• /
• pp.239-248
• /
• 2006

Improvements in understanding the effects of dietary fermentable carbohydrates and their interaction with supplemental feed enzymes and the feed manufacturing process may lead to reductions in volatile organic compound (VOC) emissions from poultry manure. Starch digestibility has been improved by replacing ground wheat or barley with whole wheat or barley, but there was no consistent effect of cereal species or feed form on the pH value of the gizzard contents. Pelleting results in improvements in feed conversion from 0 to 12%. Starch digestibility has been reported to account for up to 35 % of the improvement in available metabolic energy as a result of xylase supplementation. Factors which affect starch utilization and non-starch polysaccharide (NSP) absorption include the presence of anti-nutrient facto. (ANF) in grains, the nature of grain starch, NSP and the digestive capacity of animals. Improvements in feed production technology have been made in enzyme stabilization, allowing some dry enzyme products to be pelleted after conditioning at up to $87.69^{\circ}C$ and liquid enzymes to be stored in the feed mill for up to low months prior to use. The soluble NSP, arabinokylans and beta-glucans are partially degraded into smaller fragments by enzymes. With fragmentation, the water holding capacity is decreased, which leads to a reduction in digesta moisture, wet feces, and dirty eggs from hens fed diets containing viscosity-inducing ingredients.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.1044-1052
• /
• 2015

The aim of this modelling study was to investigate the effect of large herd size (and land areas) on walking distances and milking interval (MI), and their impact on milk yield and economic penalties when 50% of the total diets were provided from home grown feed either as pasture or grazeable complementary forage rotation (CFR) in an automatic milking system (AMS). Twelve scenarios consisting of 3 AMS herds (400, 600, 800 cows), 2 levels of pasture utilisation (current AMS utilisation of 15.0 t dry matter [DM]/ha, termed as 'moderate'; optimum pasture utilisation of 19.7 t DM/ha, termed as 'high') and 2 rates of incorporation of grazeable complementary forage system (CFS: 0, 30%; CFS = 65% farm is CFR and 35% of farm is pasture) were investigated. Walking distances, energy loss due to walking, MI, reduction in milk yield and income loss were calculated for each treatment based on information available in the literature. With moderate pasture utilisation and 0% CFR, increasing the herd size from 400 to 800 cows resulted in an increase in total walking distances between the parlour and the paddock from 3.5 to 6.3 km. Consequently, MI increased from 15.2 to 16.4 h with increased herd size from 400 to 800 cows. High pasture utilisation (allowing for an increased stocking density) reduced the total walking distances up to 1 km, thus reduced the MI by up to 0.5 h compared to the moderate pasture, 800 cow herd combination. The high pasture utilisation combined with 30% of the farm in CFR in the farm reduced the total walking distances by up to 1.7 km and MI by up to 0.8 h compared to the moderate pasture and 800 cow herd combination. For moderate pasture utilisation, increasing the herd size from 400 to 800 cows resulted in more dramatic milk yield penalty as yield increasing from c.f. 2.6 and 5.1 kg/cow/d respectively, which incurred a loss of up to $AU 1.9/cow/d. Milk yield losses of 0.61 kg and 0.25 kg for every km increase in total walking distance (voluntary return trip from parlour to paddock) and every one hour increase in MI, respectively. The high pasture utilisation combined with 30% of the farm in CFR in the farm increased milk yield by up to 1.5 kg/cow/d, thereby reducing loss by up to $0.5/cow/d (c.f. the moderate pasture and 800 cow herd scenario). Thus, it was concluded that the successful integration of grazeable CFS with pasture has the potential to improve financial performance compared to the pasture only, large herd, AMS.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.587-592
• /
• 2010

A numerical analysis of reactive flow in a MILD(Moderate and Intense Low oxygen Dilution) combustor is accomplished to elucidate the characteristics of combustion phenomena in the furnace with the variation of air fuel ratio. For the smaller magnitude of air injection velocity(10 m/s), the air flow could not penetrate toward upper part of furnace. On the other hand, the air flow suppresses the fuel flow for the case of air injection velocity 30 m/s. The air velocity 18 m/s is corresponding to the stoichiometric air flow velocity, and for that case, the air flows to relatively more upper part of the furnace when compared with the case of air injection velocity 10 m/s. The reaction zone is produced with the previous flow pattern, so that the reaction zone of the air injection velocity 10 m/s is biased to the air nozzle side and for the case of air injection velocity 30 m/s, the reaction zone is inclined to the fuel nozzle side. For the cases with the air injection velocities 16, 18, 20 m/s, the reaction zone is nearly located at the center between air nozzle and fuel nozzle. The maximum temperatures and NOx concentrations for the cases of air injection velocity 16, 18, 20 m/s are lower than the cases with air injection velocity 10, 30 m/s. From the present study, the stoichiometric air fuel ratio is considered as the most optimal operating condition for the NOx reduction.

• Journal of the Korean Vacuum Society
• /
• v.21 no.1
• /
• pp.48-54
• /
• 2012

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases and SF6 as an additive gas under thermal chemical vapor deposition system. The geometries of as-grown carbon materials were investigated with increasing the reaction temperature as the increment of $25^{\circ}C$ from $650^{\circ}C$ up to $800^{\circ}C$. At $650^{\circ}C$, the embryos for carbon coils were formed. With increasing the reaction temperature to $700^{\circ}C$, the coil-type geometries were developed. Further increasing the reaction temperature to $775^{\circ}C$, the development of wave-like nano-sized coils, instead of nano-sized coils, and occasional appearance of micro-sized carbon coils could be observed. Fluorine in $SF_6$ additive may shrink the micro-sized coil diameter via the reduction of Ni catalyst size by fluorine's etching role. Finally, the preparation of the micro-sized carbon coils having the smaller coil diameters, compared with the previously reported ones, could be possible using $SF_6$ additive.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.473-480
• /
• 2009

The 180 minutes fire test based on the standard curve of ISO-834 were conducted on three RC column specimens with different constant axial loading ratios to evaluate the fire performance of fiber cocktail (polypropylene+steel fiber) reinforced high strength concrete column. The columns were tested under three loading levels as 40%, 50%, and 61% of the design load. No explosive spalling has been observed and the original color of specimen surface has been changed to light pinkish grey. The maximum axial displacements of three specimens were 1.5~2.2 mm. There was no reduction in load bearing capacity of each specimen exposed to fire and no effect were observed on the fire performance within 61% of the design load. The tendencies of the results with loading, such as the temperature distribution of in concrete and the changes in temperature rise due to the water vaporization in concrete, are very similar to those without loading. The final temperatures of steel rebar after 180 minutes of fire test resulted in 491.4${^{\circ}C}$ for corner rebar, 329.0${^{\circ}C}$ for center rebar, and 409.8${^{\circ}C}$ for total mean of steel rebar. The difference of mean temperature between corner and center rebar was 153.7${^{\circ}C}$ㅍ. The tendency of temperature rise in concrete and steel rebar changed after 30~50 minutes from the starting time of the fire test because the heat energy influx into corner rebar is larger than that into center rebar. The cause of decrease in temperature rise was due to the water vaporization in concrete, the lower temperature gradient of the concrete with steel and polypropylene fiber cocktails, the moisture movement toward steel rebars and the moisture clogging.