• Structural Engineering and Mechanics
• /
• v.64 no.5
• /
• pp.557-566
• /
• 2017

Fiber reinforced polymer (FRP) sheets are the most efficient structural materials in terms of strength to weight ratio and its application in strengthening and retrofitting of a structure or structural elements are inevitable. The performance enhancement of structural elements without increasing the cross sectional area and flexible nature are the major advantages of FRP in retrofitting/strengthening work. This research article presents a detailed study on the inelastic response of conventional and retrofitted Reinforced Concrete (RC) frames using Carbon Fibre Reinforced Polymers (CFRP) and Glass Fiber Reinforced Polymers (GFRP) subjected to quasi-static loading. The hysteretic behaviour, stiffness degradation, energy dissipation and damage index are the parameters employed to analyse the efficacy of FRP strengthening of brick in-filled RC frames. Repair and retrofitting of brick infilled RC frame shows an improved load carrying and damage tolerance capacity than control frame.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.105-108
• /
• 2004

In general, the nonlinear behavior of composite structures composing of steel and concrete is analyzed on the basis of the assumption of the perfect bond actions in steel-concrete interface in which the interface slip or separation is not allowed. The assumption is based on the fact that the full interface bond behavior is provided with the mechanical connectors of studs. However, since the number and spacing of the studs are determined by the stress resultants calculated in the interface area, the interface analysis is required to evaluate the stress resultants. This paper describes the nonlinear steel-concrete interface behavior considering the two interface failure mechanisms of slip and separation. Elastoplastic constitutive relation is developed. thru the formulation framework using the two energy dissipation mechanisms. As the result, the steel plate push-out tests sandwitched between concrete blocks are analyzed and compared with the test results with which the good agreements are observed.

• The KIPS Transactions:PartA
• /
• v.13A no.2 s.99
• /
• pp.171-176
• /
• 2006

In this paper, we develop energy efficient designs for the Fast Fourier Transform (FFT) on FPGAs. Architectures for FFT on FPGAs are designed by investigating and applying techniques for minimizing the energy dissipation. Architectural parmeters such as degrees of vertical and horizontal parallelism are identified and a design choices. We determine design trade-offs using high-level performance estimation to obtain energy-efficient designs. We implemented a set storage types as parameters, on Xilinx Vertex-II FPGA to verify the estimates. Our designs dissipate 57% to 78% less energy than the optimized designs from the Xilinx library. In terms of a comprehensive metric such as EAT (Energy-Area-Time), out designs offer performance improvements of 3-13x over the Xilinx designs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.62-70
• /
• 2013

The purpose of this study is the displacement and velocity dependence evaluation of clamped shape metallic damper, which were evaluated superior in energy dissipation capacity than straight type slit damper. For this purpose, 6 metallic damper specimens are prepared and dependence test are performed. Test variables are displacement dependence and velocity dependence. According to displacement dependence test results, larger target displacement (50mm) shows lower cyclic numbers and cumulated energy dissipated area than lower target displacement (25mm). Also it shows higher strength and early failure than short target displacement. In velocity dependence evaluation, fast target velocity (60mm/sec) shows lower cyclic numbers and cumulated energy dissipated area than slow target velocity (40mm/sec). Therefore the hysteresis dependence of metallic damper were evaluated as close relation to the loading displacement and velocity conditions.

• Elastomers and Composites
• /
• v.36 no.3
• /
• pp.153-161
• /
• 2001

The rubber pads era tank which undergo dynamic deformations with the sufficient amplitudes and frequencies lead to a considerable internal temperature rise due to the heat generation. The heat generation which is dependent on the viscoelastic characteristics or a rubber is due to the conversion of partial mechanical energy into thermal energy identical to the area oi hysteresis loop. Heat generation without adequate heat dissipation leads to heat build-up and the excessive temperature rite exerts a bad influence upon the performance and the life of rubber products. In this paper, temperature distributions of the rubber pads of a tank track subjected to dynamic loads are obtained under the assumption of the steady state. Heat generation rates used in this finite element analysis are acquired through experiments and the computed temperature fields are displayed in isothermal contour regions.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.77-84
• /
• 2015

This paper presents the design of a low-power, low area 256-radix 16-bit crossbar switch employing a 2D Hyper-X network topology. The Hyper-X crossbar switch realizes the high radix of 256 by hierarchically combining a set of 4-radix sub-switches and applies three modifications to the basic Hyper-X topology in order to mitigate the adverse scaling of power consumption and propagation delay with the increasing radix. For instance, by restricting the directions in which signals can be routed, by restricting the ports to which signals can be connected, and by replacing the column-wise routes with diagonal routes, the fanout of each circuit node can be substantially reduced from 256 to 4~8. The proposed 256-radix, 16-bit crossbar switch is designed in a 65 nm CMOS and occupies the total area of $0.93{\times}1.25mm^2$. The simulated worst-case delay and power dissipation are 641 ps and 13.01 W when operating at a 1.2 V supply and 1 GHz frequency. In comparison with the state-of-the-art designs, the proposed crossbar switch design achieves the best energy-delay efficiency of $2.203cycle/ns{\cdot}fJ{\cdot}{\lambda}2$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.87-94
• /
• 2007

It has been argued that the use of plastics can cause problems during design and manufacture owing to their low strength, relatively poor thermal conductivity and large thermal expansion. However, the advantages of plastics e.g., corrosion resistance, low cost, curtailment of weight, design flexibility etc., can compensate abundantly for the disadvantages. This study analyzes and compares the heat transfer performance characteristics of automotive compact oil cooler composed of plastic tube bundle with conventional metal oil cooler on the same core area basis as diameter, tube thickness, number of tube or tube arrangement varies. The performance analyses are accomplished by use of computational fluid dynamics program Fluent 6.2, which is verified and compared with the results of performance tests. The result of analyses is coincided with that of experiments. Flow pattern at air side according to tube arrangement is dominant factor which affects heat dissipation in case of similar total heat transfer surface area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.582-596
• /
• 2013

In order to estimate the tide and flow properties around the archipelago, around Dolsan, Choyak, Geogeom and Jindo which located in the southwestern waters of the south sea of Korea, tidal currents, residual flows and tidal energy dissipation were investigated by using 2-dimensional numerical model. The maximum speeds of tidal currents are small around Dolsando(31.92 cm/s) and large around Jindo(87.55 cm/s). The residual flow is fastest around Choyakdo where many channels and islands as compared with other study areas. The area around Jindo has the highest currents speed, but shows the flat movements. The margins between the maximum and the minimum dispersion rates of tidal energy in the areas are estimated and designate the order of values around Dolsando($392.6{\times}10^7$ erg/s), Geogeumdo($125.7{\times}10^7$ erg/s) and Jindo($23.1{\times}10^7$ erg/s) sequently. These circumstances are same as in the amplitude of M2 constituent. This means that rapid depth changes and narrow channels play an important role in tide and tidal currents energy in archipelago.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.77-86
• /
• 2008

Traditional cluster-based routing method is a representative method for increasing the energy efficiencies. In these cluster-based routing methods, the selected cluster head collect/aggregate the information and send the aggregated information to the base station. But they have to solve the unnecessary energy dissipation of frequent information exchange between the cluster head and whole member nodes in cluster. In this paper, we minimize the frequency of the information exchange for reducing the unnecessary transmit/receive frequencies as calculate the overlapped area or number of overlapped member nodes between the selected cluster head and previous cluster head in the setup phase. And besides, we consider the direction of super cluster head for optimal cluster formation. So, we propose the modified cluster selection scheme that optimizes the energy dissipation in the setup phase and reuses the saved energy in the steady phase efficiently that prolongs the whole wireless sensor network lifetime by uniformly selecting the cluster head.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.513-522
• /
• 2008

Efficient data dissemination is one of the important subjects for sensor networks. High accessibility of the sensed data can be kept by deploying the data centric storage approach in which data is stored over the nodes in the sensor network itself rather than external storages or systems. The advantage of this approach is its direct accessibility in a real-time without the severe burden on delay and power dissipation on the data path to the external storages or systems. However, if the queries from many users are concentrated to the few nodes with data, then the response time could be increased and it could lead to the reduction of network life time by rapid energy dissipation caused by concentrated network load. In this paper, we propose a adaptive data centric storage scheme based on proxy trajectory (APT) mechanism. We highlight the data centric storage mechanism by taking account of supporting large number of users, and make it feasible to provide high-performance accessibility when a non-uniform traffic pattern is offered. Storing data around the localized users by considering spatial data-access locality, the proxy trajectory of APT provides fast response for the users. The trajectory, furthermore, may help the mobile users to roams freely within the area they dwell.