• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.853-855
• /
• 2005

본 논문은 Sequence Diagram을 이용한 안전등급 PLC(Safety-Grade Programmable Logic Controller) 운영 체제의 인터페이스 설계명세를 기술한다. 원자력 발전소에 사용하기 위한 안전 소프트웨어(Safety Software)의 규제 기준인 Reg. Guide는 IEEE Std 1016, IEEE Std 1016.1 의 설계명세서 작성 표준에 따라 작성하도록 요구하며, 이러한 규제기준과 기 표준을 안전등급 PLC를 위한 운영체제 소프트웨어의 설계명 세서도 만족해야 한다. 특히 운영 체제와 외부 장치들 사이의 인터페이스를 위해 실시간 특성의 표현에 장점을 갖는 Sequence Diagram을 적용함으로써 운영체제의 인터페이스에 대한 정확성, 완전성, 그리고 일관성을 향상시킬 수 있었다.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.2
• /
• pp.163-176
• /
• 2001

In this paper, the stress resultants and displacements of simply supported curved girder based on the flexural torsional theory considering torsional warping effects are analyzed. And elastic equations of continuous curved girder are obtained by using energy method. Also, bending moment warping torsional moment diagram, pure torsional moment diagram, shearing force diagram, and deflection diagram of continuos curved girder bridge subjecting to vertical loads and uniform loads are presented.

• Journal of Convergence Society for SMB
• /
• v.2 no.2
• /
• pp.13-19
• /
• 2012

Various quality requirements have increased in developing embedded systems. One of those requirements in mobile embedded system is to reduce energy consumption because of limited power supply. Especially as the complexity of embedded software is increased, the interests of the software energy consumption analysis is also increased. In recent years, some studies has been carried out model-based analysis because it can be able to reflect energy consumption requirements in design phase. In this paper, we proposes a model-based energy analysis technique using SysML parametric diagram. The proposed technique designs software activity model using characteristics of parametric diagram, and then energy consumption value by the execution of the model is derived. Our technique has merit that can perform tradeoffs analysis for energy quality property between different implementations.

• Korean System Dynamics Review
• /
• v.11 no.3
• /
• pp.61-86
• /
• 2010

This research analyzed on the future energy society of Korea in 2030 using system thinking approach. Key uncertainty factors determining the future energy society were analyzed in a multi disciplinary view point such as politics, economy, society, ecology and technology. Three causal loop diagrams for the future energy system in Korea and related policy leverages were shown as well. 'Global economic trends', 'change of industrial structure' and 'energy price' were identified as key uncertainty factors determining the Korean energy future. Three causal loop diagrams named as 'rate of energy self－sufficiency and alternative energy production', 'economic activity and energy demand' and 'Excavation of new growth engines' were developed. We integrated those causal loop diagrams into one to understand the entire energy system of the future, proposed three strategic scenarios(optimistic, pessimistic and most likely) and discussed implications and limits of this research.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.1
• /
• pp.51-59
• /
• 2018

Various Si-Fe-Al ternary alloys were prepared with the same amount of Si by the melt spinning technique. The feasibility of the capacity prediction approach based on the estimation of the active amount of Si using the phase diagram was practically examined and reported. These predictions were verified by the electrochemical test of fabricated coin cells and other characterization methods. The capacity prediction approach using the phase diagram might be a fundamental and efficient method to accelerate the practical application of Si-based alloys as the anode material for Li-ion batteries. The details on the prediction procedure were discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.6
• /
• pp.770-777
• /
• 1999

In this study a phase diagram has been used to investigate the unsteadiness of two-dimensional lid-driven closed flows within a square cavity for twelve Reynolds numbers; $7.5{\times}10^3,\; 8{\times}10^3,\; 8.5{\times}10^3,\; 9{\times}10^3,\; 9.5{\times}10^3,\; 10^4,\;1.5{\times}10^4,\;2{\times}10^4,\; 3{\times}10^4,\; 7.5{\times}10^4$ and $10^5$. The results indicate that the first critical Reynolds number at which the flow unsteadiness of sinusoidal fluctuation appears from the temporal variation of total kinetic energy curves is assumed of sinusoidal fluctuation appears form the temporal variation of total kinetic energy curves is assumed to be in the neigh-bourhood of $Re=8.5{\times}10^3$ The second critical Reynolds number where the periodic amplitude and frequency collapse to random disturbance being existed around $Re=1.5{\times}10^4$ The exponentially decreasing vortices formed at the lower two corners are found commonly at the time-mean flow pattern of $Re=3{\times}10^4$.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.2
• /
• pp.19-29
• /
• 2016

Whilst there are growing interests in pursuing energy efficiency and zero-energy buildings in built environment, it is widely recognised that Building-Integrated Photovoltaic (BIPV) is one of the most promising and required technologies to achieve these goals in recent years. Although BIPV is a broadly utilized technique in variety of fields in built environments, it is required that generation of BIVP should be analysed and calculated by external specialists. The aim of this research is to focus on developing a new diagram for prediction of the pre-estimation model in early design stage to harness solar radiation data, PV types, slopes, azimuth and so forth. The results of this study show as follows: 1) We analysed 162 districts in a national level and the examined areas were categorised into five zones. The standard deviation of the results was 2.9 per cent; 2) The increased value of solar radiation on a vertical plane in five categorised zones was 42kWh/m3, and the result was similar to the average value of 43.8kWh/m3; and 3) The pre-estimation of diagram was developed based on the categorisation of zones and azimuth as well as the results of the developed diagram showed little difference compared to the previously utilised method. The suggested diagram in this paper will contribute to estimate BIPV without any external contribution to calculate the value. Even though the result of this study shows little difference, it is required to investigate a number of different variables such as BIPV types, modules, slope angle and so forth in order to develop an integrated pre-estimation diagram.

• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.553-566
• /
• 2009

In-phase control and energy-optimized control are the two major control strategies proposed for series power quality controllers (SPQC). However quantitative analysis and comparison between these two control strategies is quite limited in previous publications. In this paper, an extensive quantitative analysis is carried out on these two control strategies through phasor diagram approach, and a detailed quantitative comparison is conducted accordingly. The load current is used as the reference phasor, and this leads to a simpler and clearer phasor diagram for the quantitative relationship. Subsequently detailed analysis of SPQC using in-phase control and energy-optimized control are provided respectively, under different modes both for under voltage/voltage sag and for over voltage/voltage swell. The closed form analytic expressions and the curves describing SPQC compensation characteristics are obtained. The detailed system power flow is figured out for each mode, and the detailed quantitative comparison between the two control strategies is then carried out. The comparison covers several aspects of SPQC, such as required compensating voltage magnitude, required capacity of energy storage component, and maximal ride-through time. In the end, computer simulation and prototype experimental results are shown to verify the validity of all the analysis and the result of the comparison.

• International Journal of Fluid Machinery and Systems
• /
• v.8 no.3
• /
• pp.169-182
• /
• 2015

When simulating the dynamic behaviour of a hydro power plant, it is essential to have a good representation of the turbine behaviour. The pressure transients in the system occurs because the flow changes, which the turbine defines. The flow through the turbine is a function of the pressure, the speed of rotation and the wicket gate opening and is, most often described in a performance diagram or Hill diagram. In the Hill diagram, the efficiency is drawn like contour lines, hence the name. A turbines Hill diagram is obtained by performance tests on scaled model in a laboratory. However, system dynamic simulations have to be performed in the early stage of a project, before the turbine manufacturer has been chosen and the Hill diagram is known. Therefore one have to rely on diagrams for a turbine with similar speed number. The Hill diagram is drawn through measured points, so for using the diagram in a simulation program, one have to iterate in the diagram based on curve fitting of the measured points. This paper describes an alternative method. By means of the Euler turbine equation, it is possible to set up two differential equations which represents the turbine performance with good enough accuracy for the dynamic simulations. The only input is the turbine's main geometry, the runner blade in- and outlet angle and the guide vane angle at best efficiency point of operation (BEP). In the paper, simulated turbine characteristics for a high head Francis turbine, and for a reversible pump turbine are compared with laboratory measured characteristics.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.488-489
• /
• 2018