• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1925-1932
• /
• 2016

One of the major challenges in the design of wireless sensor network (WSN) is to reduce the energy consumption of sensor nodes for prolonging the network lifetime. In the sensor network, communication is the most energy consuming event. Therefore, most of the energy saving techniques conserve energy by adjusting different parameters of the trans-receiver. Among them, one of the promising methods is the transmission power control (TPC). In this paper, we investigated the effects of the link quality based TPC scheme employed to the IEEE 802.15.4 standard for energy saving. The simulation results demonstrated that the link quality based TPC scheme works effectively in conserving energy as compared to the conventional IEEE 802.15.4.

• Structural Engineering and Mechanics
• /
• v.66 no.6
• /
• pp.713-727
• /
• 2018

Thin-walled mental tubes under lateral crushing are desirable and reliable energy absorbers against impact or blast loads. However, the early formations of plastic hinges in the thin cylindrical wall limit the energy absorption performance. This study investigates the energy absorption performance of a simple, light and efficient energy absorber called the ring stiffened tube. Due to the increase of section modulus of tube wall and the restraining effect of the T-stiffener flange, key energy absorption parameters (peak crushing force, energy absorption and specific energy absorption) have been significantly improved against the empty tube. Its potential application in the offshore blast wall design has also been investigated. It is proposed to replace the blast wall endplates at the supports with the energy absorption devices that are made up of the ring stiffened tubes and springs. An analytical model based on beam vibration theory and virtual work theory, in which the boundary conditions at each support are simplified as a translational spring and a rotational spring, has been developed to evaluate the blast mitigation effect of the proposed design scheme. Finite element method has been applied to validate the analytical model. Comparisons of key design criterions such as panel deflection and energy absorption against the traditional design demonstrate the effectiveness of the proposed design in blast alleviation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.12
• /
• pp.3046-3060
• /
• 2012

Low power listening (LPL) MAC protocols based on duty-cycling mechanism have been studied extensively to achieve ultra low energy consumption in wireless sensor networks (WSNs). Especially, recent ACK-based LPL schemes such as X-MAC employ strobe preambles and an early ACK, and show fair performances in communications and energy efficiencies. However, the state-of-the-art ACK-based LPL scheme still suffers from collision problems due to the protocol incompleteness. These collision effects are not trivial and make WSNs unstable, aggravate energy consumptions. In this paper, we propose two novel schemes; (i) ${\tau}$-duration CCA to mitigate the collision problem in ACK-based LPL MAC protocols. (ii) Short Preamble Counter (SPC) to conserve more energy by reducing unnecessary overhearing. We demonstrate the performance improvement of our scheme via a mathematical analysis and real-time experiments. Both analysis and experimental results confirm that our proposed scheme saves energy by up to 36% compared to the naive ACK-based LPL MAC protocol thanks to ${\tau}$-duration CCA and SPC.

• International Journal of Advanced Culture Technology
• /
• v.1 no.2
• /
• pp.18-23
• /
• 2013

In this paper, we consider the problem of designing optimal sensing time and the minimization of energy consumption in the Cognitive radio Network. Trade-off between throughput and the sensing time are observed, and the equations are derived for the optimal choice of design variables. In this paper, we also look at the optimization problem involving all the design parameters together. The advantages of the proposed scheme for the spectrum sensing and access process are shown through simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.738-743
• /
• 2011

This paper considers the cost minimization issue for sensor network systems where sensor energy is supplied by remote energy sources wirelessly. Assuming symmetric structures of sensor nodes and energy sources, cost minimization problem is formulated, where the cost of sensor networks is represented as a function of sensor node density and energy source coverage. The optimal solution for the problem is provided and simulation results show that the proposal scheme achieves around 19% cost reduction in comparision to a conventional scheme.

• International Journal of Computer Science & Network Security
• /
• v.21 no.7
• /
• pp.341-349
• /
• 2021

Many emerging mobile ad-hoc network application communications are group-oriented. Multicast supports group-oriented applications efficiently, particularly in a mobile environment that has a limited bandwidth and limited power. Energy effectiveness along with safety are 2 key problem in MANET design. Within this paper, MANET is presented with a stable, energy-efficient clustering technique. In this proposed work advanced clustering in the networks with ticket ID cluster manager (TID-CMGR) has formed in MANET. The proposed routing scheme makes secure networking the shortest route possible. In this article, we propose a Cluster manager approach based on TICKET-ID to address energy consumption issues and reduce CH workload. TID-CMGR includes two mechanism including ticket ID controller, ticketing pool, route planning and other components. The CA (cluster agent) shall control and supervise the functions of nodes and inform to TID-CMGR. The CH conducts and transfers packets to the network nodes. As the CH energy level is depleted, CA elects the corresponding node with elevated energy values, and all new and old operations are simultaneously stored by CA at this time. A simulation trial for 20 to 100 nodes was performed to show the proposed scheme performance. The suggested approach is used to do experimental work using the NS- simulator. TIDCMGR is compared with TID BRM and PSO to calculate the utility of the work proposed. The assessment shows that the proposed TICKET-ID scheme achieves 90 percent more than other current systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.889-896
• /
• 2007

Advances in wireless networking, micro-fabrication and integration, and embedded microprocessors have enabled a new generation of massive-scale sensor networks. Because each sensor node is limited in size and capacity, it is very important to design a new simple and energy efficient protocol. Among conventional sensor networks' routing protocols, the directed diffusion scheme is widely blown because of its simplicity. This scheme, however, has a defect in that sending interest and exploratory data messages while setting connection paths consumes much energy because of its flooding scheme. Therefore, this paper proposes a new sensor network routing protocol, called sequenced directed diffusion with a threshold control, which compromises the conventional directed diffusion scheme's defect and offers an energy efficient routing idea. With a computer simulation, its performance is evaluated and compared to the conventional directed diffusion scheme. Numerical results show that the proposed scheme offers energy efficiency while routing packets, and resolves ill-balanced energy consumption among sensor nodes.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.1
• /
• pp.60-66
• /
• 2007

In terms of the vehicle efficiency, a fuel cell hybrid system has advantages compared to a conventional internal combustion engine and a fuel cell alone-powered system. The efficiency of the fuel cell hybrid vehicle mainly depends on the maximum power of the fuel cell and therefore it is important to decide the design value of the fuel cell maximum power. In this paper, to estimate the performance of the fuel cell hybrid mini-bus in the design phase the simulator based on the models for the fuel cell stack, the electric battery, the fuel cell balance of plant, the controller, and the vehicle itself is proposed. Additionally, the hybrid mini-bus efficiencies with several different fuel cell powers are simulated for a city driving schedule and are compared on another. Consequently, the proposed simulation scheme is useful to determine the best design value of the fuel cell hybrid vehicles.

• Coupled systems mechanics
• /
• v.7 no.2
• /
• pp.233-254
• /
• 2018

In order to reduce the dependency on fossil fuels, a policy to increase the production capacity of wind turbine is set up. This can be achieved with increasing the dimensions of offshore wind turbine blades. However, this increase in size implies serious problems of stability and durability. Considering the cost of large turbines and financial consequences of their premature failure, it is imperative to carry out numerical simulations over long periods. Here, an energy-conserving time-stepping scheme is proposed in order to ensure the satisfying computation of long-term response. The proposed scheme is implemented for three-dimensional solid based on Biot strain measures, which is used for modeling flexible blades. The simulations are performed at full spatial scale. For reliable design process, the wind loads should be represented as realistically as possible, including the fluid-structure interaction (FSI) dynamic effects on wind turbine blades. However, full-scale 3D FSI simulations for long-term wind loading remain of prohibitive computation cost. Thus, the model to quantify the wind loads proposed here is a simple, but not too simple to be representative for preliminary design studies.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.53-60
• /
• 2011

In Wireless Sensor Networks, IEEE 802.11 happen unnecessary energy consume because of packet transmission using maximum power between sensor node. The BASIC scheme is to use maximum transmission power for RTS-CTS and minimum required transmission power so as to high energy efficiency for DATA-ACK. However BASIC scheme may degrade network throughput with collision of ACK packet by node in carrier sensing zone and may result in higher energy consumption than when using IEEE 802.11 without power control. Existing PCM(Power Control MAC) scheme is to use DATA packet transmission method by periodically maximum power level so as to sensing DATA packet transmit in carrier sensing zone of transmission node, and this method can avoid collision of ACK packet. This paper present problem by energy efficiency of PCM scheme, and design some more improved PCM scheme.