• 제목/요약/키워드: Energy Converting

검색결과 274건 처리시간 0.025초

회전기기 실시간 동작상태 모니터링을 위한 자가발전 기반 센서모듈 (Self-Powered Integrated Sensor Module for Monitoring the Real-Time Operation of Rotating Devices)

  • 김창일;여서영;박범근;정영훈;백종후
    • 센서학회지
    • /
    • 제28권5호
    • /
    • pp.311-317
    • /
    • 2019
  • Rotating devices are commonly installed in power plants and factories. This study proposes a self-powered sensor node that is powered by converting the vibration energy of a rotating device into electrical energy. The self-powered sensor consists of a piezoelectric harvester for self-power generation, a rectifier circuit to rectify the AC signal, a sensor unit for measuring the vibration frequency, and a circuit to control the light emitting diode (LED) lighting. The frequency of the vibration source was measured using a piezoelectric-cantilever-type vibration frequency sensor. A green LED was illuminated when the measured frequency was within the normal range. The power generated by the piezoelectric harvester was determined, and the LED operation was assessed in terms of the vibration frequency. The piezoelectric harvester was found to generate a power of 3.061 mW or greater at a vibration acceleration of 1.2 g ($1g=9.8m/s^2$) and vibration frequencies between 117 and 123 Hz. Notably, the power generated was 4.099 mW at 122 Hz. As such, our self-powered sensor node can be used as a module for monitoring rotating devices, because it can convert vibration energy into electrical energy when installed on rotating devices such as air compressors.

축류형 사이클론을 이용한 공기역학경과 광학직경 상관관계 분석에 관한 연구 (A Study on Correlation Analysis between Aerodynamic Diameter and Optical Diameter Using Axial Flow Cyclone)

  • 김은정;박경려;허지은;조철희;조윤행
    • 한국입자에어로졸학회지
    • /
    • 제19권4호
    • /
    • pp.155-164
    • /
    • 2023
  • APS (Aerodynamic Particle Sizer) and OPC (Optical Particle Counter) have been widely used to real-time measurement of indoor and outdoor aerosols. The APS measures the size distribution based on an aerodynamic diameter, while the OPC uses optical diameter to measure the size distribution of aerosols. Since obtaining a size distribution based on aerodynamic diameter is important to understand aerosol characteristics, lots of researcher had been developed experimental equations which can convert optical diameter into aerodynamic diameter. However, previous studies have conducted repeated experiments on particles having a single diameter. In this study, an experimental method of converting optical diameter into aerodynamic diameter through a single experiment was presented. The collection efficiencies of an axial cyclone were measured using APS and OPC at the same time, and the correlation equation between aerodynamic diameter and optical diameter was driven through a theoretical model. Using the proposed method, the size distribution of NaCl particles measured by OPC showed a high correlation with the size distribution obtained by APS (0.93 of R-squared value). In the tests conducted on ISO A1, A2, and A4 test particles, the converted OPC size distribution tended to be similar to the APS size distribution, and for each of test particles (ISO A1, A2, and A4), the R-squared values for the APS particle size distribution were 0.75, 0.86, and 0.89, respectively.

상수도 급수방식 전환의 타당성 분석 및 최적 범위 산정모델 연구 (A Study on Feasibility Analysis and Optimum Range Calculation Model by Conversion of Water Supply System)

  • 박준열;신휘수;서지원;김기범;구자용
    • 상하수도학회지
    • /
    • 제31권2호
    • /
    • pp.177-186
    • /
    • 2017
  • This study concerned the analysis on the efficiency of the conversion of water tank type supply system to direct water supply system to examine the feasibility of the conversion, as well as the calculation of optimal conversion range that enables the supply of safe, high-quality water at stable pressure in accordance with the standards of water supply facility. The results of this research showed that when converting water supply system from water tank type supply system to direct water supply system, more nodal points could be properly converted and more reduction of electricity usage was expected in case water pressure rather than residence time was fixed. This means that higher efficacy can be obtained by fixing water pressure when converting water supply system. However, since the number of the locations that received on-spot inspection was small and the electricity usage measured was not exclusively by water supply facility, it is difficult to judge that such reduction of electricity usage accurately represents reduced electricity usage by water supply facility alone. therefore, after having secured on-spot information about a larger number of locations in apartment complexes that have converted water supply system, and utilizing information about electricity usage exclusively by water supply facility, the proposed method of this research could be applied to accurately deducing expected reduction of electricity usage by water supply facilities of various other apartment complexes. It is also considered possible to deduce an effective operation method of water supply system by finding out an area that shows low pressure or low residual chlorine concentration in the optimal conversion range of water supply, followed by estimating the proper location of pumping station or the proper chlorine dosage at the power purification plant that supply water to the target area.

흡.배기를 고려한 고팽창 저속 디젤 기관의 이론 해석과 기관 성능에 대한 연구 (A Study on the Theory Analysis and Engine Test Performance by a High Expansion Diesel Engine into Intake-Exhaust Consideration)

  • 장태익
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제32권8호
    • /
    • pp.1141-1148
    • /
    • 2008
  • One of the methods to increase the efficiency of an engine is to expand pressures obtained from combustions equal to the pressure of atmosphere as much as possible and then convert thermal energy into mechanical energy also as much as possible. In this research, the Diesel cycle was thermodynamically interpreted to evaluate the possibility of high efficiency by converting Diesel engines to the Atkinson cycle, and general cycle features were analyzed after comparing these two cycles. In the case of fuel air the Diesel-Atkinson cycle considering intake and exhaust similar to real cycles, the value of thermal efficiency and average effective pressure increased, though their values were smaller than those of standard air amount cycle, when expansion compression ratio increased. When normal Diesel engines of which compression stroke and expansion stroke are all the same, was converted to the Atkinson cycle by changing the time of intake value close, combustion pressure reduced due to reduced expansion compression ratio and intake air amount due to decreased effective cycle volume.

가변초음파 적외선열화상을 이용한 이종접합용접부의 미세균열 검출 연구 (The Study of Micro Crack Detection in Dissimilar Metal Weld Using a Variable Ultrasound Infrared Thermography)

  • 박정학;박희상;최만용;권구안
    • 비파괴검사학회지
    • /
    • 제35권3호
    • /
    • pp.215-220
    • /
    • 2015
  • 최근 널리 사용되는 모든 비파괴검사 기술 중 적외선열화상 카메라는 점차 적용 범위를 확대하고 있다. 초음파적외선 열화상은 절대온도 0 K 이상의 모든 물체가 방출하는 적외선 에너지를 검출하여 검사자가 볼 수 있는 화상으로 이미지를 만들어 검사하는 기술에 초음파를 접목하여 결함 부위만을 검출하는 방법으로 비접촉으로 넓은 범위를 빠른 시간에 검사할 수 있는 장점이 있는 기술이다. 본 연구에서는 고유주파수를 변화할 수 있는 터패놀-D 소재의 가변초음파 가진검사 방법을 이용하여 결함 검출의 적용가능성을 연구하였다.

차량 안정성을 고려한 인휠모터 방식 연료전지 전기자동차용 회생제동 알고리즘 개발 (Development of Regenerative Braking Control Algorithm for In-wheel Motor Type Fuel Cell Electric Vehicles Considering Vehicle Stability)

  • 양동호;박진현;황성호
    • 유공압시스템학회논문집
    • /
    • 제7권2호
    • /
    • pp.7-12
    • /
    • 2010
  • In these days, the researches about hybrid and fuel cell electric vehicles are actively performed due to the environmental contamination and resource exhaust. Specially, the technology of regenerative braking, converting heat energy to electric energy, is one of the most effective technologies to improve fuel economy. This paper developed a regenerative braking control algorithm that is considered vehicle stability. The vehicle has a inline motor at front drive shaft and has a EHB(Electo-hydraulic Brake) system. The control logic and regenerative braking control algorithm are analyzed by MATLAB/Simulink. The vehicle model is carried out by CarSim and the driving simulation is performed by using co-simulation of CarSim and MATLAB/Simulink. From the simulation results, a regenerative braking control algorithm is verified to improve the vehicle stability as well as fuel economy.

  • PDF

함수율과 밀도가 참오동나무재의 음향 특성에 미치는 영향 (Effect of Moisture Contents and Density of Paulownia tomentosa on Acoustical Properties)

  • 유태경;정희석
    • Journal of the Korean Wood Science and Technology
    • /
    • 제25권2호
    • /
    • pp.61-66
    • /
    • 1997
  • Paulownia wood has been used as sound board for Korean traditional musical instruments such as Keomungo(Korean lute), Kayagum(twelve-stringed Korean harp) and Changgu(hour-glass shaped drum), etc. The acoustic properties of wood affected not only by dimensions but also by density and stiffness of wood. Due to inhomogeneity and hygroscopicity of wood. the acoustic properties of wood are inconsistent. To clarify the effect of moisture content and air dry density on acoustic properties, longitudinal vibration experiment was accomplished in 3 moisture content levels of 9.6, 11.1 and 12.5% and in 3 air dry density levels of 0.22, 0.25 and 0.28g/$cm^3$. The results were as follows: As the moisture content increased, the fundamental frequency. specific dynamic Young's modulus and sound velocity decreased, but the internal friction increased so that loss of energy increased. The values in damping of sound radiation were rapidly decreased at 12.5%. It meant that the damping of internal friction was larger than damping of sound radiation at high moisture content. As the air dry density increased, the fundamental frequency, specific dynamic Young's modulus and sound velocity increased, but the internal friction and damping of sound radiation decreased so that loss of energy decreased. And acoustic converting efficiency was hardly influenced by increasing air drying density.

  • PDF

앳킨슨사이클 실현을 위한 단기통 저속 디젤기관의 구성과 기초 실험 (A Composition and Basis Experiment of Single Cylinder Low Speed Diesel Engine for Atkinson Cycle Materialization)

  • 장태익
    • 한국수소및신에너지학회논문집
    • /
    • 제24권5호
    • /
    • pp.461-466
    • /
    • 2013
  • In this research, the diesel cycle was thermodynamically interpreted to evaluate the possibility of high efficiency by converting diesel engine to the atkinson cycle, and general cycle features were analyzed after comparing these two cycles. That an experimental single cylinder and a long stroke diesel-atkinson engine, of which S/B ratio was more than 3, were manufactured. After evaluating the engine through basic experiments, a diesel engine was converted into the atkinson cycle by constituent VCR (variable compression ratio) device and VVT (variable valve timing) system. The experimental method was to observe compression work reduction effects due to low compression effects from delayed intake valve closing of the early stage atkinson engine. The result, the possibility of increasing compression ratio about each engine load was confirmation by constructing compensate expansion-compression ratio in accordance with the delayed intake valve close.

압전변압기를 이용한 LCD Backlight 구동 (LCD Backlight Drive Using The Piezoelectric Transformer)

  • 임성운;최연호;원철호;구본호;김이국
    • 조명전기설비학회논문지
    • /
    • 제17권2호
    • /
    • pp.28-33
    • /
    • 2003
  • 기계적인 에너지를 전기적인 에너지로 변환시키는 장치인 압전변압기는 고전압\ulcorner고효율의 소형변압기이다. 압전변압기는 노트북용 LCD backlight 구동장치로 적합하며, 공진주파수에서 동작시 거의 정현파에 가까운 교류파형을 출력하는 장치이다. 본 논문에서는 입력 DC 전압으로부터 FET를 구동시키는 게이트 신호로 변환시킨 다음 LC공진을 통하여 정현파를 생성시켜 압전변압기를 구동시키는 인버터에 대하여 논의하였다. 실험결과 압전변압기의 전압 이득과 공진주파수는 부하에 비례하며, 전압 이득은 입력전압의 변화에는 무관하게 나타났다.

비허(脾虛)(기허(氣虛).양허(陽虛))증(證)에 관(關)한 문헌적(文獻的) 고찰(考察)

  • 윤상협;류봉하;박동원;장인규;류기원
    • 대한한방내과학회지
    • /
    • 제10권1호
    • /
    • pp.53-64
    • /
    • 1989
  • In an attempt to investigate the current of clinical researches on spleen yang or vital energy deficiency syndrome, the results were as follows. 1. It is possible to occure spleen deficiency syndrome which come from genetic factor. 2. The absorption disturbance in spleen deficiency syndrome can be likely caused by gastrointestinal mucosa injury, disorder of vagus nerve funtion and impairment of excretion of exocrine gland in pancreas. 3. Owing to the failure of tansporting and converting funtion of spleen, minerals, hematogenic substance and nutritional substance are scanty and then imbalanced metabolism state which heat production is decreasing is appeared. 4. By the failure of vital energy and blood growth, decreasement of $O_2$ transportation ability of RBC, disoder of blood coagulation, immune system disturbance which humoral immunity is enhanced and cellular immunity is decreased, are noted. 5. While there is not still an attemt to study the spleen deficiency sydrome in muscle disease or disease of four extremities, but it is likely suggested that spleen-stomach supplyment thereapy is very excellent effect on muscle disease and disease of four extremities.

  • PDF