• 제목/요약/키워드: Energy Convergence Efficiency

검색결과 428건 처리시간 0.03초

AMI 사업에 민간투자를 유인하기 위한 우크라이나 배전서비스 요금정책 연구 (A Study on the Electricity Distribution Tariff Regulation of Ukraine to Encourage Private Investment on the AMI)

  • 김철년
    • 한국융합학회논문지
    • /
    • 제12권11호
    • /
    • pp.19-26
    • /
    • 2021
  • 본 연구는 우크라이나 에너지효율화 분야 민간투자 활성화를 위한 배전서비스 요금정책의 제안을 목적으로 하였다. 우크라이나는 전력분야 시장 개편과 에너지효율화를 유도하기 위한 정책 도입으로 해당 분야 경쟁력이 높은 국내 기업들이 진출하기에 최적기로 정책과 시장에 대한 사전 연구가 필요하다. 우크라이나 32개 배전회사 중 한 곳을 선정하고 에너지효율화의 핵심인 AMI 도입을 민간투자로 진행할 경우를 가정하여 투자 경제성분석 시뮬레이션을 진행하여 배전서비스 요금정책 중 핵심적인 RAB 정책의 주요 내용의 방향을 도출하였다. 배전회사가 민간사업자로부터 도입하는 AMI 리스 자산에 대해 규제자산으로 인정이 필요하며, 기타 정책은 현재의 규정대로 적용되어도 투자 결정에는 크게 영향을 주지 않았다. 시뮬레이션을 통해 데이터를 제시함으로써 실무적 근거를 제공한 것에 연구의 의의가 있으며, 에너지효율화 분야들로 연구가 확장되면 기업들의 해외진출에 도움이 될 것으로 기대된다.

에너지 효율화를 위한 상황인지 기반 건물 관리 기술 (A Technology of Context-aware based Building Management for Energy Efficiency)

  • 이현정;한진수;정연쾌;이일우;이상호
    • 중소기업융합학회논문지
    • /
    • 제2권1호
    • /
    • pp.69-75
    • /
    • 2012
  • 지구온난화 및 기후 변화에 따른 재난, 이상기온, 질병 등 각종 사회 문제들이 대두됨에 따라, 에너지 절감 및 효율화를 위한 기술 개발이 증대되고 있다. 주택, 상업건물, 공공 건물 분야에서 소비되는 에너지는 우리나라 전체 에너지 사용의 22%를 차지함에 따라, 건물에너지 절감은 전체 에너지 절감에서 매우 중요한 요소이며, 이를 위한 방안이 추진되고 있다. 기존의 건물에서는 에너지 효율화를 위해 열 손실에 대한 대책 마련 및 에너지 저소비형 장비 사용 등의 수동적 방법을 사용하였으나, 최근에는 ICT 기술과 융합하여 에너지 사용의 측정, 모니터링, 통제를 통해 지속적으로 에너지 낭비 요소를 감지 및 제거하는 방식의 건물 에너지 효율화를 위한 능동적 기술이 대두되고 있다. 에너지 효율화를 이용하여 에너지 절감 장비를 사용하더라도, 낭비 상황을 제어하지 않으면 실질적이고 지속적인 에너지 절감 효과를 달성하기 어렵게 된다. 이 논문에서는 국내외 건물 에너지 효율화를 위한 기술 개발 현황을 소개하고, 능동적 에너지 절감을 위한 이슈를 고찰한다.

  • PDF

Comparative Study and Simulation of P&O Algorithm using Boost Converter for a Photovoltaic System

  • Ganzorig, Batdelger;Song, Han-Jung
    • 한국산업융합학회 논문집
    • /
    • 제22권4호
    • /
    • pp.395-403
    • /
    • 2019
  • The excessive need of power is creating an unbalance situation in power sector, where solar energy is one of the best solutions among other energy sources to mitigate this demand. It is globally accepted because of its flexibility and long life compared to others. A lot research is going on to enhance the energy efficiency by introducing photovoltaic (PV) power generation technology, but still irradiation of PV power is the major problem. In this manuscript, we have designed PV module using single diode methodology and also the solar conversion efficiency was boosted with maximum power point tracking (MPPT) by using perturb and observe (P&O) algorithm. The simulation was done for $1000W/m^2$ and $800W/m^2$ at solar irradiance in cell temperature of 25C and 40C degree levels in PSIM tool.

Energy-efficient Power Allocation based on worst-case performance optimization under channel uncertainties

  • Song, Xin;Dong, Li;Huang, Xue;Qin, Lei;Han, Xiuwei
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제14권11호
    • /
    • pp.4595-4610
    • /
    • 2020
  • In the practical communication environment, the accurate channel state information (CSI) is difficult to obtain, which will cause the mismatch of resource and degrade the system performance. In this paper, to account for the channel uncertainties, a robust power allocation scheme for a downlink Non-orthogonal multiple access (NOMA) heterogeneous network (HetNet) is designed to maximize energy efficiency (EE), which can ensure the quality of service (QoS) of users. We conduct the robust optimization model based on worse-case method, in which the channel gains belong to certain ellipsoid sets. To solve the non-convex non-liner optimization, we transform the optimization problem via Dinkelbach method and sequential convex programming, and the power allocation of small cell users (SCUs) is achieved by Lagrange dual approach. Finally, we analysis the convergence performance of proposed scheme. The simulation results demonstrate that the proposed algorithm can improve total EE of SCUs, and has a fast convergence performance.

가열패널과 열풍을 이용한 자동차용 도료의 건조특성에 관한 실험적 연구 (An Experimental Study on the Drying Characteristics of Automotive Paint Using Heating Panels and Hot Air)

  • 김성일;박기호
    • 설비공학논문집
    • /
    • 제22권12호
    • /
    • pp.828-836
    • /
    • 2010
  • The drying is a process that involves coupled and simultaneous heat and mass transfer. When a wet solid is subjected to thermal drying, two processes occur simultaneously. Drying is classified according to heat transfer characteristics in terms of conduction, convection and radiation. In thermal drying, radiation is easier to control than conduction and convection drying and involves a relatively simple structure. In this study, we measured energy consumption, surface hardness of paint and surface gloss with variation of surface temperature of drying materials and drying time. Drying characteristics and energy consumption between heating panels and hot air heating have been presented. The present study shows that a dryer using heating panels is more effective than a hot air dryer from the viewpoint of energy conservation. The hot air dryer, however, was not optimized and more studies on various parameters related to drying will need to be investigated for definite comparison of drying characteristics of the dryers. The result, even if limited, would present the effective availability of paint drying.

RGB White Organic Light Emitting Diode with a Color Control Layer

  • Lee, Jeong-Ik;Chu, Hye-Yong;Yang, Yong-Suk;Lee, Mi-Do;Chung, Sung-Mook;KoPark, Sang-Hee;Hwang, Chi-Sun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.1587-1590
    • /
    • 2006
  • Through the engineering of recombination region and energy transfer in organic light emitting device, blue and red light emitting device with good color stability has been successfully obtained. A Color control layer (CCL), which emits green light through the energy transfer from the emission layers, has been introduced into the blue and red light emitting device for RGB white OLED. The RGB white OLED showed the current efficiency of 13 cd/A and the CIE coordinates of (0.33, 0.38) at $1000\;cd/m^2$. The device exhibited very stable spectrum with respect to operating current density and the CIE coordinates varied from (0.34, 0.38) to (0.31, 0.37) for $100-22000\;cd/m^2$.

  • PDF

융합형여과집진장치에서의 먼지입자와 원소수은의 제거 성능 특성 (Simultaneous Removal Characteristics of Particulate and Elemental Mercury in Convergence Particulate Collector)

  • 박영옥;정주영
    • 한국입자에어로졸학회지
    • /
    • 제6권4호
    • /
    • pp.173-183
    • /
    • 2010
  • The high temperature pleated filter bags which were used during this study were made of pleated nonwoven fabric of heat and acid resistant polysulfonate fibers which can withstand the heat up to $300^{\circ}C$ and have a filtration area which is 3 to 5 times larger than the conventional round filter bags. Cartridge module packed with 3 kind of the sulfur impregnated activated-carbon based sorbents were inserted in the inner of the pleated filter bag. This type of pleated filter bag was designed to remove not only the particulate matter but also the gaseous elemental mercury. The electrostatic precipitator part can enhance the particulate removal efficiency and reduce the pressure drop of the pleated filter bag by agglomerated particles to form a more porous dust layer on the surface of the pleated bag which is increased the filter bag cleaning efficiency. In addition, the most of particles are separated from the flue gas stream through the cyclone and the electrostatic precipitator part which were installed at the lower part and main body part of the convergence particulate collector, respectively. Thus reduce particulate loading of the high temperature pleated filter bags were applied in this study to analyze the removal characteristics of particulate matter and gaseous elemental mercury.

BIM을 활용한 에너지성능평가 기법에 관한 연구 (A Study on Evaluation Method of Energy Performance by using BIM)

  • 박승길;천정길;손원득;최현상;최영식
    • 한국산업융합학회 논문집
    • /
    • 제16권4호
    • /
    • pp.147-152
    • /
    • 2013
  • According to the obligation of BIM application, the guidelines of energy simulation based on BIM are being presented. Although there is the advantage to minimize the error in energy analysis using the energy model, there are still issues about insufficient standards and the compatibility of the gbXML. Therefore, it is necessary to establish the processes to utilize and apply BIM methods for energy simulation. This study was examined on the compatibility of data for energy simulation by the gbXML schema and energy efficiency by BIM.

A Study on the Sustainability of Compact Cities in Korea

  • Sun-Ju, KIM
    • 융합경영연구
    • /
    • 제11권2호
    • /
    • pp.13-22
    • /
    • 2023
  • Purpose: The purpose of this study is to examine the policy implications of establishing a compact city in Seoul, analyzing whether it is an appropriate and efficient eco-friendly housing supply alternative. Research design, data, and methodology: The analysis criteria include efficiency, safety, and comfort, with efficiency encompassing economic, energy, and public transport links' efficiency. Safety and comfort are aspects of eco-friendliness, housing safety, and improvement in living environments. Results: In terms of economic efficiency, compact cities are a less expensive option than purchasing land for housing construction. To increase energy efficiency, we plan to adopt eco-friendly energy sources. Transportation efficiency is high in locations near public transport stations. To enhance safety and comfort, we intend to create large-scale parks and forests in Seoul. To ensure residential safety, measures will be taken to reduce road vibration, vehicle noise, and scattering dust. Conclusions: Selecting an appropriate location that provides convenient public transportation is essential for creating a compact city for housing in a large city. Combining a compact and smart city is necessary, and implementing smart technologies is needed to prevent dust, noise, and vibrations, which are undesirable in a residential environment.

에너지 ICT 융합과 빅데이터 서비스 (Energy ICT convergence with big data services)

  • 최종우;이일우
    • Journal of the Korean Data and Information Science Society
    • /
    • 제26권5호
    • /
    • pp.1141-1154
    • /
    • 2015
  • 본고에서는 에너지 사용량 절감 및 효과적인 에너지 사용을 위한 에너지 기술과 정보통신기술(ICT)의 융합에 대해 서술한다. 전 세계적인 에너지 사용량 증가 추세에 대응하기 위하여 많은 연구가 진행되어왔으나, 이들 중 많은 부분은 에너지 생산, 소비, 전달 단계에서 사용하는 장비 자체의 효율 증가를 목표로 하고 있다. 에너지 절감을 위한 ICT 적용은 획일화된 연구 방향에서 벗어나 기존에 고려 대상이 아니던 분야에서의 에너지 절감을 기대할 수 있다. 에너지 기술과 ICT의 융합을 통한 빅데이터 서비스 제공은 대량의 에너지 및 환경 데이터 연계 분석을 가능하게 한다. 빅데이터 분석을 통해 연관성이 불분명하던 데이터 간의 경향성을 찾아내는 것은 새로운 에너지 절감 방안 모색에 도움이 되며, 나아가 새로운 비즈니스 모델 개발로 이어질 수 있다. 본고는 에너지 기술과 ICT의 융합을 통해 빅데이터 서비스를 제공하는 실제 기업 및 프로젝트 사례들을 소개하는 것을 목적으로 한다.