• Wind and Structures
• /
• 제3권2호
• /
• pp.97-115
• /
• 2000

The technique of proper orthogonal decomposition is potentially useful in specifying the fluctuating surface pressure field around structures. However there has been a degree of controversy over whether or not the calculated modes have physical meanings. This paper addresses this issue through consideration of the results of full scale experiments, and through an analytical investigation. It is concluded that the lower, most energetic modes are likely to reflect different fluctuating flow mechanisms, although no mode is likely to be associated with just one flow mechanism or vice versa. The higher, less energetic modes are likely to represent interactions between different flow mechanisms, and to be significantly affected by the number of measurement points and measurement errors. The paper concludes with a brief description of the application of POD to the problem of building ventilation, and the calculation of cladding pressures.

• Journal of Electrochemical Science and Technology
• /
• 제7권3호
• /
• pp.190-198
• /
• 2016

Application of fuel cell to produce renewable energy for commercial purpose is limited by the high cost of Pt based electrode materials. Development of inexpensive, high energetic electrode is the need of the hour to produce pollution free energy using bio-fuel through a fuel cell. Ni-Cu and Ni-CeO₂-Cu electrode materials, electro synthesized by pulse current have been developed. The surface morphology of the electrode materials is controlled by different deposition parameters in order to produce a high current from the electro-oxidation of the fuel, the ethanol. The developed materials are electrochemically characterized by Cyclic Voltammetry (CV), Chronoamperometry (CA) and Potentiodynamic polarization tests. The results confirm that the high current is due to their enhanced catalytic properties viz. high exchange current density (i₀), low polarization resistance (R_p) and low impedance. It is worthwhile to mention here that the addition of CeO₂ to Ni-Cu has outperformed Pt as far as the high electro catalytic properties are concerned; the exchange current density is about eight times higher than the same on Pt surface. The morphology of the electrode surface examined by SEM and FESEM exhibits that the grains are narrow and sub spherical with 3D surface, containing vacancies in between the elongated grains. The fact has enhanced more surface area for electro oxidation of the fuel, giving rise to an increase in current. Presence of Ni, CeO₂, and Cu is confirmed by the XRD and EDXS. Fuel cell fabricated with Ni-CeO₂-Cu material electrode is expected to produce clean electrical energy at cheaper rates than conventional one, using bio fuel the derived from biomass.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.481-483
• /
• 1998

The problem of production of new materials based on polyheteroarylenes and other polymers combining good mechanical and dielectric properties. radiation and chemical stability with heat- and thermal stability is related with the development of efficient synthesis technique of starting low-molecular compounds. Alicyclic dianhydrides are believed to be the promising monomers to synthesize various polymers.

• Journal of Acupuncture Research
• /
• 제23권3호
• /
• pp.231-239
• /
• 2006

Functional medicine is a system which utilizes certain investigative and treatment methods that are primarily oriented toward the recognition of functional disorder. Functional disorders take place on an energetic plane. This plane is not capturable using our regular investigatory techniques, such as X -ray. ultrasound, computer tomography and laboratory analyses. The 7-zone-diagnostic system(VEGA-DFM 722 and ABR-2000, etc) is a diagnostic device Which applies pulse signals to predetermined bodily locations. Applying alternating positive and negative stress to tissues with positive and negative pulses first manifests itself as negative and positive wave forms. The skin has many functions as an organ. It is the organism's interlace with the outsider world. Hence, the manner in which the skin reacts to external stimuli reflects the current state of the organism(as meridian systems). This system make a diagnosis of functional disorder or some typical organic diseases include stress of the mind or the body, and the energetic situation, reserves. We are known a disorder or disease throw the result chart. This result chart contain disorder flow wave forms and some valuable diagnostic hints (letters ; S, OM, RA, etc). In spite of this 7-zone-diagnostic system that is applied plentifully in the clinical application, there is not a statistics which is suitable. Therefor we must carry out many various research in the future.

• Journal of Astronomy and Space Sciences
• /
• 제35권3호
• /
• pp.175-183
• /
• 2018

Many recent satellites have mission periods longer than 10 years; thus, satellite-based local space weather monitoring is becoming more important than ever. This article describes the instruments and data applications of the Korea Space wEather Monitor (KSEM), which is a space weather payload of the GeoKompsat-2A (GK-2A) geostationary satellite. The KSEM payload consists of energetic particle detectors, magnetometers, and a satellite charging monitor. KSEM will provide accurate measurements of the energetic particle flux and three-axis magnetic field, which are the most essential elements of space weather events, and use sensors and external data such as GOES and DSCOVR to provide five essential space weather products. The longitude of GK-2A is $128.2^{\circ}E$, while those of the GOES satellite series are $75^{\circ}W$ and $135^{\circ}W$. Multi-satellite measurements of a wide distribution of geostationary equatorial orbits by KSEM/GK-2A and other satellites will enable the development, improvement, and verification of new space weather forecasting models. KSEM employs a service-oriented magnetometer designed by ESA to reduce magnetic noise from the satellite in real time with a very short boom (1 m), which demonstrates that a satellite-based magnetometer can be made simpler and more convenient without losing any performance.

• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.11-26
• /
• 2014

The analyses carried out within the Seismic Probabilistic Risk Assessments (SPRAs) of Nuclear Power Plants (NPPs) are affected by significant aleatory and epistemic uncertainties. These uncertainties have to be represented and quantified coherently with the data, information and knowledge available, to provide reasonable assurance that related decisions can be taken robustly and with confidence. The amount of data, information and knowledge available for seismic risk assessment is typically limited, so that the analysis must strongly rely on expert judgments. In this paper, a Dempster-Shafer Theory (DST) framework for handling uncertainties in NPP SPRAs is proposed and applied to an example case study. The main contributions of this paper are two: (i) applying the complete DST framework to SPRA models, showing how to build the Dempster-Shafer structures of the uncertainty parameters based on industry generic data, and (ii) embedding Bayesian updating based on plant specific data into the framework. The results of the application to a case study show that the approach is feasible and effective in (i) describing and jointly propagating aleatory and epistemic uncertainties in SPRA models and (ii) providing 'conservative' bounds on the safety quantities of interest (i.e. Core Damage Frequency, CDF) that reflect the (limited) state of knowledge of the experts about the system of interest.

• 설비공학논문집
• /
• 제2권2호
• /
• pp.142-154
• /
• 1990

A theoretical cycle analysis has been performed for a basic heat pump, charged with non-azeotropic refrigerant mixtures, R22/R114 and R13B1/R152a. At first, a procedure is introduced to calculate thermodynamic properties simply and correctly, and the advantages of using refrigerant mixtures are discussed through the cycle analysis. It is shown that by using refrigerant mixtures in the heat pump, several improvements can be made. In comparison with conventional pure refrigerants, the application of refrigerant mixtures results in high reliabilities caused by the extension of the application limit, energetic improvements, and a continuous capacity control. From generalizing various results, the optimum compositions in refrigerant mixtures are also determined. The 30%/70% and 40%/60% compositions are selected for R22/R114 and R13B1/R152a, respectively.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.282-288
• /
• 2015

에틸렌-비닐아세테이트(EVA)와 아지드화 폴리부타디엔(Az-PBD)를 블렌드 함으로써 새로운 에너지함유 열가소성탄성체를 제조하고, 이들의 미세구조 및 제반물성을 SEM, DSC, DMA, 인장실험 및 연소시험으로부터 조사하였다. Az-PBD는 1,2-비닐기를 갖는 폴리부타디엔(PBD)을 첨가반응에 의해 비닐기를 브롬화시킨 후, $NaN_3$를 이용하여 브롬기를 아지드기($-N_3$)로 치환시킴으로써 제조하였다. EVA/Az-PBD 블렌드는 EVA/Az-PBD 비율이 무게비로 각각 90/10, 80/20, 70/30이 되도록 용액 블렌딩으로 제조하였다. SEM, DSC, DMA 분석 결과 이들 블렌드는 부분적으로 상용성이며, EVA가 연속상을 이루고 Az-PBD가 분산상을 이루는 미세구조를 갖는 것을 알 수 있었다. 인장실험으로부터 Az-PBD 함량이 증가될수록 인장모듈러스 및 영구신장변형율이 증가되고 파단신율이 감소되는 경향을 보였으나, 제조된 모든 블렌드들은 700% 이상의 파단신율과 5% 이하의 영구인장변형율을 나타내어, 일반적인 탄성고무소재와 같은 특성을 나타내었다. 또한, 연소 시 Az-PBD 함량 증가함에 따라 더 큰 불꽂이 발생되어 연소 시 더 높은 에너지를 발생시킬 수 있음을 확인할 수 있었다.

• Journal of Astronomy and Space Sciences
• /
• 제32권2호
• /
• pp.101-112
• /
• 2015

Magnetic reconnection is a fundamental process occurring in a wide range of astrophysical, heliospheric and laboratory plasmas. This process alters magnetic topology and triggers rapid conversion of magnetic energy into thermal heating and nonthermal particle acceleration. Efforts to understand the physics of magnetic reconnection have been made across multiple disciplines using remote observations of solar flares and in-situ measurements of geomagnetic storms and substorms as well as laboratory and numerical experiments. This review focuses on the progress achieved with solar flare observations in which most reconnection-related signatures could be resolved in both space and time. The emphasis is on various observable emission features in the low solar atmosphere which manifest the coronal magnetic reconnection because these two regions are magnetically connected to each other. The research and application perspectives of solar magnetic reconnection are briefly discussed and compared with those in other plasma environments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.351-354
• /
• 1998

In this paper, electrical characteristics of an n-channel Si MOSFET with L$_{s}$=0.6.mu.m under optical illumination are charaterized on wafer. Energetic photons with .gamma.=830nm, hv=1.494eV, P$_{opt}$=300mW are injected near the drain junction, the most photoresponsive region in the device, via optical fiber. We observed significantly increased drain current and transconductance, which is considered to be useful for the implementation of OEICs on silicon substrate, under optical control with P$_{opt}$=300mW. Optical power-dependent physical mechanisms responsible for the variation of electrical characteristics under optical input are also reported.d.d.d.