• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.72-78
• /
• 1998

In this work, the effects of binder materials on the tribological behavior were experimentally evaluated for air curable MoS$_2$bonded film lubricants. The binders tested were basically alkyd and acryl based resins, and also were modified by nitro-cellulose in various weight percentages. Effects on the binder ratio to solid lubricants and the molecular weight of binders were also investigated in all aspects of the tribological behavior. For the tests, LFW-1 and Falex tester were used to measure mainly the endurance life and load carrying capacity of bonded lubricants. Results showed that lubricants of methacrylic resin has the better performance than those of other resins, and also the properties of lubricants both of alkyd and acrylic resins could be improved by modification with nitro-cellulose. It was also shown that the optimum ratio of nitro-cellulose related closely to the binder material and the testing machine.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.313-315
• /
• 2006

Proper water management is important to achieve high performance and durability of Polymer electrolyte fuel cell (PEFC). Among various stack components, gas diffusion layer (GDL) is considered as a core part to determine the gas and water transportation in a cell. To optimize the water management, the changes of properties as well as basic properties of GDLs were investigated before and after clamping of colls. Thickness, electric conductivity, porosity, hydroppobicity etc. were characterized by the same criteria. The amount of residual water after cell operation also was compared by direct measuring of weight. Based on the amount of residual water the endurance on the freeze condition was evaluated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.557-560
• /
• 2009

현재 운용중인 UAV(Unmanned Aerial Vehicle) 추진기관의 현황 및 추진기관 종류에 따른 장, 단점을 분석하였으며, 차세대 UAV 추진기관의 개발 전망 및 UAV 추진기관에 적용될 가스터빈 엔진의 특성 및 요구조건을 제시하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권1호
• /
• pp.7-14
• /
• 2017

Due to the recent advances in Phage-Change Memory (PCM) technologies, a new memory hierarchy of computer systems with PCM is expected to appear. In this paper, we present a new page replacement policy that adopts PCM as a high speed swap device. As PCM has limited write endurance, our goal is to minimize the amount of data written to PCM. To do so, we defer the eviction of dirty pages in proportion to their dirtiness. However, excessive preservation of dirty pages in memory may deteriorate the page fault rate, especially when the memory capacity is not enough to accommodate full working-set pages. Thus, our policy monitors the current working-set size of the system, and controls the deferring level of dirty pages not to degrade the system performances. Simulation experiments show that the proposed policy reduces the write traffic to PCM by 160% without performance degradations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.305-308
• /
• 2006

This paper is to investigate the strength, impact endurance and shrinkage of wet spraying type fiber composite mortar for repair material depending on fiber type and product kinds. Fiber composite mortar containing PVA fiber had the highest strength compared to that using any other fiber. Especially, The use of PVA fiber results in a remarkable enhancement in impact strength and an improved volumetric stability. Accordingly, it is confirmed that fiber composite mortar containing PVA fiber has remarkable performance as repair material of damaged section of concrete.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.88-90
• /
• 2003

We reported an AC PDP structure with grooved front panel dielectric layer. The structure exhibits low breakdown voltage, better luminance, and better endurance to crosstalk in high Xe contents. It also shows less luminous efficacy then conventional structure because of the thinner dielectric layer, but we can apply the higher Xe contents to the grooved dielectric structure, which results in the higher luminous efficacy. We made experiments with the Xe contents from 4 to16% and total gas pressure from 400 to 600Torr. The grooved dielectric structure shows the improvement of 20% luminous efficacy and 17% luminance. The firing voltages lower about 40V at 600Torr and Xe 12, 16%. The discharge characteristics of grooved dielectric structure are verified also with 2D simulation.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.830-835
• /
• 2012

A research for application of LDSMC(Low Density Sheet Molding Compound) composite is in progress for lightening the weight. This paper has performed fatigue test and simulation of external panel for Korean commercial vehicle. Before the fatigue test, static test was carried out. From the test, the structural safety was investigated using Goodman diagram. After the static test performance, the fatigue test was conducted at a range of load frequency 5Hz, a stress ratio(R) of 0.05 and an endurance limit of $10^6$ to obtain the S-N curve. The S-N curve is applied to the fatigue analysis of the external panel assembly. The result of FEM analysis was in accord with the experimental result within 83% confidence. It showed that the process to set up the safety range of allowable error is required in process of the design and simulation verification.

• Tribology and Lubricants
• /
• 제22권1호
• /
• pp.20-25
• /
• 2006

The stress behavior analysis of a-rings and packing for a LPG filling unit has been presented using a finite element analysis technique by non-linear MSC/MARC program. The sealing performance and endurance of a-rings and packing are affected by working conditions such as filling pressure, friction coefficient, compression ratio, and material properties. The elastomeric polymers of O-rings and packing are nitrile butadiene rubber (NBR) and polytetrafluoroethylene (PTFE), which are selected as proper materials of a-rings and packing based on the stress analysis results. The calculated FEM results showed that the proper material of O-ring is NBR as a secondary sealing component and the recommended material of packing is PTFE as a primary sealing unit during a LPG filling process.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권5호
• /
• pp.337-345
• /
• 2016

Recently, as the number of cores in computer systems has increased, the need for larger memory capacity has also increased. Unfortunately, dynamic random access memory (DRAM), popularly used as main memory for decades, now faces a scalability limitation. Phase change memory (PCM) is considered one of the strong alternatives to DRAM due to its advantages, such as high scalability, non-volatility, low idle power, and so on. However, since PCM suffers from short write endurance, direct use of PCM in main memory incurs a significant problem due to its short lifetime. To solve the lifetime limitation, many studies have focused on reducing the number of bit flips per write request. In this paper, we describe the PCM operating principles in detail and explore various bit flip reduction schemes. Also, we compare their performance in terms of bit reduction rate and lifetime improvement.

• 대한임베디드공학회논문지
• /
• 제11권2호
• /
• pp.117-123
• /
• 2016

In general, PCM (Phase Change Memory) is unsuitable as a main memory because it has limitations: high read/write latency and low endurance. However, the DRAM&PCM hybrid memory with the same level is one of the effective structures for a next generation main memory because it can utilize an advantage of both DRAM and PCM. Therefore, it needs an effective page management method for exploiting each memory characteristics dynamically and adaptively. So we aim reducing an access time and write count of PCM by using an effective page replacement. According to our simulation, the proposed algorithm for the DRAM&PCM hybrid can reduce the PCM access count by around 60% and the PCM write count by 42% given the same PCM size, compared with Clock-DWF algorithm.