• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.05
• /
• pp.115-118
• /
• 1994

Three-dimensional steady and pulsatile flows in an end-to-side anastomosis were investigated using a finite difference method in order to understand the flow dynamics in the preferential development of distal anastomotic intimal hyperplasia or thrombosis. Steady flow results revealed that a double helical vortex was formed in the host artery and flow recirculations near tow and heel regions were limited due to the secondary flow. Oscillating wall shear stress with significant secondary flow might be the flow dynamic reason of developing intimal hyperplasia or thrombosis.

• The Journal of the Korean dental association
• /
• v.23 no.1 s.188
• /
• pp.73-81
• /
• 1985

In the assessment of patency of a small vessel anastomosis, micro-arteriography using dental X-ray and film was used as a method of testing the patency of arterial anastomoses in the rat. Micro-arteriography could lead to an objective evaluation of the patency in End-to-End and End-to Side anastomoses. The method used in this study is easily accessible for Oral and Maxillo-facial surgeon to practice the microvascular anastomosis, and requires materials available in every dental clinic.

• Journal of Biomedical Engineering Research
• /
• v.24 no.2
• /
• pp.113-119
• /
• 2003

In this paper we introduced optimized deformed shape to prevent the blood vessel disease caused by the discord of deformed shape in the end-to-end anastomosis. This study considered the preliminary deformed shape induced by suture in the anastomosis of artery and PTFE, artificial blood vessel, with different diameters. Then we analyzed the final deformed shape of the anastomotic part under the systolic blood pressure. 120mmHg(16.0kPa). The final deformed shape of the anstomotic part was analyzed with respect to the change of initial diameter ratio(R$_{I}$) and the PTFE thickness. Equivalent and circumferential stresses induced by the systolic blood pressure in the anastomosis were also analyzed with respect to the initial diameter ratio(R$_{I}$). The results obtained were as follows : 1. Considering the preliminary deformed shape induced by suture and the systolic pressure in the anastomosis, not intimal hyperplasia, the optimal initial diameter ratio(R$_{I}$) was 1.073. 2. As the initial diameter ratio(R$_{I}$) became larger, higher equivalent and circumferential stresses were induced. And all the maximum stresses occurred on the side of PTFE 0.4mm apart from the anastomosis.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.253-259
• /
• 1997

Von Mises stress and compliance distribution was evaluated using a finite element analysis on the anastomosis of an artery with length of 20mm(z direction, along the horizental artery), inner diameter of 4mm, thickness fo 0.5mm and a PTFE graft with length of 5.7mm, inner diameter of 2mm, thickness of 0.2mm when anastomotic angle was $45^{\circ}$ and inner pressure of 1330 dyne/mm2 was applied inside the 2 conduits. From the analysis results were obtained as follows. (1) Artery diameter increased in both horizontal x(along the length of artery) and vertical y(perpendicular to the length of artery)directions and the magnitude of that in x direction was bigger than that in y direction. (2) The compliance was maximum on the anastomosis, especially on that with acute angle. The reduction of compliance was observed from the anastomosis area to the either right or left end. (3) The equivalent stress was maximum on top in the y direction and minimum on the nodes apart $110^{\circ}$ in circumferential direction from the top. (4) The equivalent stress was maximum in t도 vicinity of anastomosis with acute angle along the longitudinal direction of the artery. This trend was also observed along the PTFE graft.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.4
• /
• pp.417-423
• /
• 2017

Objective : Repair of sensorial nerve defect is an important issue on peripheric nerve surgery. The aim of the present study was to determine the effects of sensory-motor nerve bridging on the denervated dermatomal area, in rats with sensory nerve defects, using a neural cell adhesion molecule (NCAM). Methods : We compared the efficacy of end-to-side (ETS) coaptation of the tibial nerve for sural nerve defect repair, in 32 Sprague-Dawley rats. Rats were assigned to 1 of 4 groups : group A was the sham operated group, group B rats had sural nerves sectioned and buried in neighboring muscles, group C experienced nerve sectioning and end-to-end (ETE) anastomosis, and group D had sural nerves sectioned and ETS anastomosis was performed using atibial nerve bridge. Neurological evaluation included the skin pinch test and histological evaluation was performed by assessing NCAM expression in nerve terminals. Results : Rats in the denervated group yielded negative results for the skin pinch tests, while animals in the surgical intervention groups (group C and D) demonstrated positive results. As predicted, there were no positively stained skin specimens in the denervated group (group B); however, the surgery groups demonstrated significant staining. NCAM expression was also significantly higher in the surgery groups. However, the mean NCAM values were not significantly different between group C and group D. Conclusion : Previous research indicates that ETE nerve repair is the gold standard for peripheral nerve defect repair. However, ETS repair is an effective alternative method in cases of sensorial nerve defect when ETE repair is not possible.

• Journal of Biomedical Engineering Research
• /
• v.13 no.4
• /
• pp.339-352
• /
• 1992

A numerical simulation of the steady and pulsatile flow across the end-to-side anastomosis was performed In order to understand the role of flow dynamics in the preferential bevel opment of distal anastomotic intimal hyperplasla. The finite element technique was employed to solve two-dimensional unsteady pulsatile flow in that region. The results of the steady flow revealed that low shear stresses occur at the proximally occluded host artery and at the recirculation region in the Inner wall just distal to the toe region of the anastomosis. The nor- mal;zed wall shear rate was increased, as was the recirculation zone size in the host artery of the by-pass graft anastomosis, with increased anastomotic junction angle. In order to min imize the size of the low wall shear region which might result in the intimal hyperplasia in the by-pass graft anastomosis, a smaller anastomotic junction angle is recommended. The pulsatile flow simulation revealed flow that regions of low and ascillating mali shear do exist near the anastomosis as In the steady simulation. The shift of stagnation point depends on the pulsation of the flow. As the flow was accelerated at systole, the stagnation point moved downstream, disappered at early diastole and reappeared during late diastole. Low shear stress was also found along both walls of the occluded proximal artery. However, the diastolic flow behavior is quite different from the steady results. The vortex near the occluded artery moved downstream and inwardly during late systole, and disappeared during diastole. Recirculations proximal to the toe and heel regions were significant during diastole. Shear stress oscillation was found along the opposite wall. The results of the present study revealed that tow shear occurs at the proximally occluded host artery aud the recirculation region in the inner wall Just dlstal to the toe region of the anastomosis. The present study suggested that the regions of fluctuated wall shear stress wit flow separation is correlated with the preferential developing regions of anastomosis neointial fibrous hyperplasia.

• Journal of Chest Surgery
• /
• v.27 no.7
• /
• pp.603-609
• /
• 1994

Esophageal atresia is a rare congenital anomaly and it usually associated with tracheo-esophgeal fistula and other congenital anomalies. The first report of esophageal atresia with tracheo-esophageal fistula was done by Thomas Gibson in 1696. In 1941, Haight performed the first successful primary anastomosis for esophageal atresia. These accomplishments opened the gateway for clinical studies that have resulted in reinforcements and improvement in the care of infants born with this anomaly. From January 1986 to April 1994, 14 cases of esophgeal atresia with tracheo-esophgeal fistula were diagnosed in Kyung Hee Uinv. Hospital. There were 9 male and 5 female infants. 12 infants were Gross classification type C and 2 infants were type A. The average body weight was 2.7$\pm$0.4kg and Waterson Category A contained 4 infants, B contained 3 infants and C contained 7 infants. Among these infants, 9 infants were underwent anastomosis procedures. We performed retropleural approach in 6 infants, transpleural approach in 2 infants and 1 infant was performed colon interposition through substernal space.By the method of anastomosis, end-to-side anastomosis was performed in 5 infants, end-to-end anastomosis in 3 infants and esophagocologastrostomy in 1 infant.The former 8 infants were Gross classification type C and the latter was type A. Among the type C infants, 6 infants were anastomosed with one layer interrupted suture and 2 infants with 2 layer interrupted suture. Post- operative death was in 1 infant and 8 infants were discharged with good result and have been in good condition.

• Archives of Reconstructive Microsurgery
• /
• v.1 no.1
• /
• pp.51-55
• /
• 1992

Problems of composite tissue transfer commonly arise when a single indispensable recipient vessel receives the graft vssel, and the graft vessel must be sutured in end-to-side fashion so as not todisturb the vascularity of the recipient vessel. The triangular flap in the recipient vessel wall gives an intact endothelial surface when the flow of blood stream is presented and may reduce the chance of anastomosis. We selected mature Wistar rats weighing over 450 grams to compare the conventional longitudinal slit from the triangular flap in the recipient carotid artery over bloood pressure and blood flow when the donor carotid artery was anastomosed in end-to-side fashion. In 30 minutes after anastomosis, maximum blood pressure measured in the donor carotid arterial side when the recipient arterial wall was fasioned with the longitudinal slit was recorded 114 mmHg and with the triangular flap 100mmHg. Minimum blood pressure with the longitudinal slit was 98mmHg and with the triangular flap 88mmHg. The amount of blood collected for 30 seconds in the conventional longitudinal slit was 1.18mg and in the triangular flap 0.78mg. Histology study in 30 minutes, the conventional longitudinal slit demonstrated the more hemorrhagic features around the suture material compared to that of the triangular. flap and, in the 7th day, the conventional longitudinal slit demonstrated the more prominent granulomatous reactions and vascular proliferations around the suture material compared to that of the triangular flap.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.253-258
• /
• 1994

Three-dimensional steady and pulsatile flows in an end-to-side anastomosis were investigated using a finite difference method in order to understand the flow dynamics in the preferential development of distal anastomotic intimal hyperplasia or thrombosis. Steady flow results revealed that a double helical vortex was formed in the host artery and flow recirculations near toe find heel regions were restricted due to the secondary flow. Oscillating wall shear stress with significant secondary flow might be flow dynamic reason of developing intimal hyperplasia or thrombosis near the anastomotic region.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.334-337
• /
• 1997

Von Mises stress and compliance distribution was evaluated using a finite element analysis on the end-to-side anastomosis of an artery with length of $20\sim24mm$, inner diameter of 4mm, thickness of 0.5mm and a PTFE graft with length of 10mm, inner diameter of 2mm, thickness of 0.2mm when the anastomotic angle was taken from $30^{\circ}\sim90^{\circ}$ in every $10^{\circ}$ and the diameter ratio from $0.1\sim1$ in every 0.1. The inner pressure of $1330dyne/mm^2$ was applied inside the 2 conduits. It was found that the compliance whose magnitude is larger on the acute angle anastomotic side than on the acute angle side became larger as the anastomotic angle became smaller and the diameter ratio larger and that the equivalent stress on the acute angle anastomotic side was larger than that on the abtuse angle side and became larger as the anastomotic angle and the diameter ratio became larger.