• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.4 s.304
• /
• pp.59-68
• /
• 2005

In this paper, we design a PCI Express controller for future communication system The controller supports the full functionality of Transaction Layer and Data Link Layer of PCI Express. The designed controller has the proposed transmitter buffer architecture to obey Replay mechanism. This scheme merges the transmitting buffer and the replay buffer. The proposed buffer has the higher data transfer efficiency than the conventional buffer architecture because it can dynamically adjust size of a replay buffer space. We also design transmitter of Transmitter Transaction Layer to effectively support the proposed buffer, The receiver device of PCI Express must possess the buffer for three types of transaction to support Flow Control. And it must report the amount of the buffer space regularly to the Port at the opposite end of the link. We propose the simple receiver buffer scheme using only one buffer to easily support Flow Control. And the designed controller is verified under proposed test bench

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2185-2189
• /
• 2010

Closely arranged CdSe and Zn doped CdSe vertical nanorod bundles were grown directly on FTO coated glass by using electrodeposition method. Structural analysis by XRD showed the hexagonal phase without any precipitates related to Zn. FE-SEM image showed end capped vertically aligned nanorods arranged closely. From the UV-vis transmittance spectra, band gap energy was found to vary between 1.94 and 1.98 eV due to the incorporation of Zn. Solar cell parameters were obtained by assembling photoelectrochemical cells using CdSe and CdSe:Zn photoanodes, Pt cathode and polysulfide (1M $Na_2S$ + 1M S + 1M NaOH) electrolyte. The efficiency was found to increase from 0.16 to 0.22 upon Zn doping. Electrochemical impedance spectra (EIS) indicate that the charge-transfer resistance on the FTO/CdSe/polysulfide interface was greater than on FTO/CdSe:Zn/polysulfide. Cyclic voltammetry results also indicate that the FTO/CdSe:Zn/polysulfide showed higher activity towards polysulfide redox reaction than that of FTO/CdSe/polysulfide.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.626-635
• /
• 2013

An analysis of the junction capacitance in resonant rectifiers which has a significant impact on the operating point of resonance circuits is studied in this paper, where the junction capacitance of the rectifier diode is to decrease the resonant current and output voltage in the circuit when compared with that in an ideal rectifier diode. This can be represented by a simplified series resonant equivalent circuit and a voltage transfer function versus the normalized operating frequency at varied values of the resonant capacitor. A low voltage to high voltage push-pull DC/DC resonant converter was used as a design example. The design procedure is based on the principle of the half bridge class-DE resonant rectifier, which ensures more accurate results. The proposed scheme provides a more systematic and feasible solution than the conventional resonant push-pull DC/DC converter analysis methodology. To increase circuit efficiency, the main switches and the rectifier diodes can be operated under the zero-voltage and zero-current switching conditions, respectively. In order to achieve this objective, the parameters of the DC/DC converter need to be designed properly. The details of the analysis and design of this DC/DC converter's components are described. A prototype was constructed with a 62-88 kHz variable switching frequency, a 12 $V_{DC}$ input voltage, a 380 $V_{DC}$ output voltage, and a rated output power of 150 W. The validity of this approach was confirmed by simulation and experimental results.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.6
• /
• pp.1098-1105
• /
• 2017

Vesicular stomatitis virus G glycoprotein (VSV-G) has been widely used for pseudotyping retroviral, lentiviral, and artificial viral vectors. The objective of this study was to establish a potential approach for large-scale production of VSV-G. To this end, VSV-G was cloned with an N-terminal His-tag into Pichia pastoris expression vector pPIC3.5K. Three clones ($Mut^s$) containing the VSV-G expression cassette were identified by PCR. All clones proliferated normally in expansion medium, whereas the proliferation was reduced significantly under induction conditions. VSV-G protein was detected in cell lysates by western blot analysis, and the highest expression level was observed at 96 h post induction. VSV-G could also be obtained from the condition medium of yeast protoplasts. Furthermore, VSV-G could be incorporated into Ad293 cells and was able to induce cell fusion, leading to the transfer of cytoplasmic protein. Finally, VSV-G-mediated DNA transfection was assayed by flow cytometry and luciferase measurement. Incubation of VSV-G lysate with the pGL3-control DNA complex increased the luciferase activity in Ad293 and HeLa cells by about 3-fold. Likewise, incubation of VSV-G lysate with the pCMV-DsRed DNA complex improved the transfection efficiency into Ad293 by 10% and into HeLa cells by about 1-fold. In conclusion, these results demonstrate that VSV-G could be produced from P. pastoris with biofunctionalities, demonstrating that large-scale production of the viral glycoprotein is feasible.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.1 no.1
• /
• pp.1-8
• /
• 2005

Aquifer Thermal Energy Storage (ATES) can be a cost-effective and renewable geothermal energy source, depending on site-specific and thermohydraulic conditions. To design an effective ATES system having the effect of groundwater movement, understanding of thermohydraulic processes is necessary. The heat transfer phenomena for an aquifer heat storage are simulated by using FEFLOW with the scenario of heat pump operation with pumping and waste water reinjection in a two layered confined aquifer model. Temperature distribution of the aquifer model is generated, and hydraulic heads and temperature variations are monitored at the both wells during 365 days. The average groundwater velocities are determined with two hydraulic gradient sets according to boundary conditions, and the effect of groundwater flow are shown at the generated thermal distributions of three different depth slices. The generated temperature contour lines at the hydraulic gradient of 0.001 are shaped circular, and the center is moved less than 5 m to the direction of groundwater flow in 365 days simulation period. However at the hydraulic gradient of 0.01, the contour center of the temperature are moved to the end of east boundary at each slice and the largest movement is at bottom slice. By the analysis of thermal interference data between two wells the efficiency of the heat pump system model is validated, and the variation of heads is monitored at injection, pumping and no operation mode.

• Journal of Plant Biotechnology
• /
• v.5 no.4
• /
• pp.225-231
• /
• 2003

The hormonal requirement suiting micropropagation of Morus alba during any season throughout the year was studied. Sprouting frequency from axillary buds of M. alba was greatly influenced by the time of explant collection, the highest value was achieved when nodal explants were collected at the end of bud dormancy period (late in March) and cultured on Murashige and Skoog (MS) medium supplemented with low concentration (0.5 mg/L) of BAP, kinetin or IBA (85-68%). In addition, they showed higher axillary bud sprouting on growth-regulators-free medium (49%) than others collected in autumn or winter and cultured on medium supplemented with various growth regulators (47-48%). Regardless of that period, young explants with greenish buds collected in summer exhibiting high sprouting frequency (66%) on MS medium supplemented with 0.5 mg/L kinetin and 0.5 mg/L GA3. Shoot multiplication via adventitious bud formation was achieved when the nodal explants were cultured on MS medium supplemented with 2 mg/L BAP and 0.2 mg/L IBA. Further multiplication via nodal explants of in vitro grown shoots was obtained on MS medium supplemented with 0.5 mglL BAP and 0.5 mg/L GA3. While half strength MS medium supplemented with low concentration (0.5 mg/L) of IBA, IAA or 2,4-D stimulated adventitious root formation, IBA was the best. After transfer the plantlets to the soil, acclimatization for three weeks was essential prerequisite for survival in high frequency (92%). Peroxidase activity is related to break of bud dormancy where maximum enzyme activity was detected when the lateral buds were induced to commence growth under field condition (early in spring) or in vitro.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.75-82
• /
• 2009

Air transport markets are composed of airlines' networks through their base airports. The analysis of an air transport market has been focusing on determining the efficiency or competitiveness of airports or airlines in the market using number of routes, number of passengers, transfer rates, revenues, costs, and other data. However, little work has been done in analyzing the airport network itself. Assuming the air transport markets of Korea, China, and Japan are integrated, this paper aims to analyze the characteristics of the resulting airport network. To that end, the degree of connectivity, the degree of closeness, and the betweenness of centrality are employed. The analysis shows that Incheon International Airport is better than most other airports in terms of the degree of connectivity and that of closeness. Airports in Japan, however, exhibit strong connectivity but weak closeness and betweenness of centrality. Although it has low connectivity, Shenyang Airport has a possibility of becoming an attractive point of the integrated market in the future due to its high degree of closeness.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.4
• /
• pp.343-353
• /
• 2017

Objective: This study aims to evaluate the efficiency of two representative subway map design types, namely a diagram type and a geographical type using physiological metrics, performance metrics, and self-reported metrics, which are representative usability metrics. Background: Subway maps need to be designed in order for users to quickly search and recognize subway line information. Although most cities' subway maps currently use the diagram type designed by Henry Beck, New York City's subway map has recently been changed to the subway map type combined with the geographical type designed by Michael Hertz. However, not many studies on its efficiency are found, and the studies that are available mainly depend on questionnaire surveys or take on a subjective behavioral study type based on experts' experiences. In this regard, evaluation through a more objective method is needed. Method: This study employed usability metrics as a method to evaluate the efficiency of information search targeting the diagram type and geographical type subway maps used mostly as subway maps. To this end, physiological metrics obtained through eye tracking, task completion time, representative metric of task performance, and subjective evaluation metrics were used for the suitability evaluation of subway map designs. Results: In the result of gaze movement distance analysis, no significant difference was shown in the two design types in terms of a process finding a departure station from the starting point and a process finding a transfer station between the departure station and arrival station (destination). However, the gaze movement distance in the process finding the arrival station at the departure station was significantly shorter in the geographical type, rather than in the diagram type. The analysis of task completion time showed a result similar to the gaze movement distance analysis result. Task completion time was significantly shorter in the geographical type, rather than in the diagram type, which is in the process finding the arrival station at the departure station. In other information search processes, no significant difference was shown. As a result of subjective evaluation metrics analysis, no significant difference was revealed in the two design types. Conclusion: An analysis on the two representative subway map design types was carried out via the adoption of usability metrics. As a result, although no significant difference was shown in some information search processes, it was revealed that information search was easier in the geographical type overall. Also, it was found that usability metrics can be effectively used to evaluate the design types of subway maps. Application: The study results can be used to set design direction to offer ease in information search on subway lines. The study also can be used as a method to evaluate a subway map's design type.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.281-287
• /
• 2016

Purpose: The purpose of this study is to develop a walking-type two-row sesame reaper, which can simultaneously perform the cutting and collecting of sesame plants and other crops like perilla and soybean. Methods: The factors involved in reaping sesame were determined experimentally in order to design a prototype of the sesame reaper. The prototype is made up of four parts for cutting, conveying, collecting, and running. The height of two disc-plate saw blades on the cutting part is adjusted by an adjusting wheel, and peripheral speed is adjusted in accordance with the running speed. The conveying belt of the conveying part can be tilted from $0^{\circ}$ to $90^{\circ}$. The collecting part extracts a predetermined amount of transferred sesame plants. The prototype was used to evaluate the performance at different working speeds, so that the work efficiency can be calculated. Results: The center of gravity of the sesame plants was 900 mm, measured from the end of the cut stem. The diameter of the disc-plate saw blade was determined to be 355 mm, peripheral speed was 20.4-32.7 m/s, and the picking height of the conveying belt for sesame was 130 mm. The performance of transfer and collection of the sesame, when the insertion angles were $60^{\circ}$ and $90^{\circ}$, proved to be excellent. However, when the angle was over $120^{\circ}$, the performance was only 75-80%. The performance was at 100% efficiency when the ratio between running speed and conveying belt speed of the prototype was 1:2, which seems to be the ideal ratio for the sesame reaper. Conclusions: A sesame reaper was developed, which can integrate the processes of cutting, conveying, and collecting, by investigating and considering various factors involved in the reaping process. The sesame reaper can reduce the costs for yielding and producing sesame due to its highly efficient performance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.74-82
• /
• 2019

The revolution of industry 4.0 is enabling us to build an intelligent connection society called smart cities. The use of renewable energy in particular solar energy is extremely important for modern society due to the growing power demand in smart cities, but its difficult to monitor and manage in each buildings since need to be deploy low energy sensors and information need to be transfer via wireless sensor network (WSN). The Internet of Things (IoT) / low-power wide-area (LPWA) is an emerging WSN technology, to collect and monitor data about environmental and physical electrical / electronics devices conditions in real time. However, providing power to IoT sensor end devices and other public electrical loads such as street lights, etc is an important challenging role because the sensor are usually battery powered and have a limited life time. In this paper, we proposes an efficient solar energy-based power management scheme for smart city based on IoT technology using LoRa wide-area network (LoRaWAN). This approach facilitates to maintain and prevent errors of solar panel based energy systems. The proposed solution maximizing output the power generated from solar panels system to distribute the power to the load and the grid. In this paper, we proved the efficiency of the proposed system with Simulink based system modeling and real-time emulation.