횡비틀림 좌굴은 가설 중 붕괴 사고 등의 안전사고를 유발할 수 있기 때문에 설계단계에서 좌굴에 대한 정확한 안전성 검토가 이루어져야 한다. 횡비틀림 좌굴을 방지하기 위한 방안으로 단부 보강을 통해 거더의 뒤틀림 강도 증가시키거나 크로스 프레임 설치를 통해 비지지길이를 감소하는 방법 등이 있다. 크로스 프레임은 바닥판 합성 이후 구조적 역할이 적은 반면 재료비와 설치비에 따른 인건비 비중이 매우 크며, 용접부의 피로 균열로 인해 유지관리 성능을 감소시키는 요인으로 작용할 수 있다. 콘크리트 충전 반원기둥보강재를 통한 단부 보강 공법은 반원기둥 형태의 보강재를 통해 플레이트 거더의 단부를 보강하는 공법으로 거더 자체의 뒤틀림 강성을 증가시켜 횡비틀림 좌굴 강도를 증가시킨다. 이 연구에서는 콘크리트 충전 반원기둥보강재가 적용된 플레이트 거더의 뒤틀림 강도 증가로 인한 횡비틀림 좌굴 강도의 영향을 검토하기 위하여 설계식에 의한 결과와 유한요소해석의 결과를 비교하였고 실물재하실험을 통해 검증하였다. 설계식은 경계조건의 구속과 관련된 유효길이계수를 적용하고 있는 Eurocode의 설계식을 사용하였으며 결과를 검증하기 위하여다양한 단면의 유한요소해석을 수행하였다. 이후 횡방향 하중을 통해 뒤틀림을 받는 거더의 실물재하실험을 수행하여 콘크리트 충전 반원기둥보강재의 성능을 확인하였다. 그 결과 CFHPS가 적용된 플레이트 거더는 기존 판형 보강재가 적용된 플레이트 거더와 비교하여 뒤틀림 강도가 증가하였으며 그로 인해 횡비틀림 좌굴 강도가 증가하는 것으로 확인되었다.
설계시의 결함, 사용 중의 손상, 극한 환경에 장기간 노출에 따른 열화로 인해, 콘크리트 구조물의 성능은 감소된다. 본 논문은 8개 구역을 가진 대도시 철도 고가교에 대한 현장조사를 수행하고 내구성 평가를 수행한 연구이다. 대상 구조물에 대하여, 현장조사를 수행하여 내구성능을 평가하였으며, 사용상의 문제점을 도출하였다. 또한 내구지수-환경지수 산정법을 이용하여 현 상태의 상부구조 및 하부구조에 대한 내구성 확보기간을 평가하였으며, 이상적인 준공상태를 가정한 조건으로 도출된 내구성 확보기간과 비교하였다. 대상 구조물은 RC T형교, PSC 거더교, RC 박스교, 라멘교 등이 포함되어 있었으며, 각 구조형식에 따른 문제점을 분석하였다. PSC 거더의 단부균열, PSC 거더의 휨균열, 외부강선보강 정착부 균열, RC 박스의 휨균열, RC T형교의 휨균열을 주된 문제점으로 평가되었으며, 이를 패턴화하여 원인을 제시하였다. 본 연구는 각 구간의 열화에 따른 보수시기의 계획에 효과적인 자료로 사용되어질 수 있다.
The dynamic behavior of two steel bridges crossed by the Korean High Speed Train(KHST) has been investigated experimentally and the results are compared with the specification requirement of BRDM and other typical PSC Box bridge's responses. The investigated bridges are a 2-girder steel bridge of 1@40m span length(E-Won Bridge), 2@50m span length (Ji-Tan Bridge), and a PSC Box girder bridge of 2@40m span length (Yeon-Jae Bridge). A set of experimental tests were performed during operation of KHST, and a number of accelerometers, LVDTs and ring-type displacement transducers were utilized for measurement of three kinds of dynamic responses (acceleration, deflection, and end-rotation angle). Measured responses show that the vertical deflections and end-rotation angles of the three bridges are all satisfying the spec. requirement with large margin, but it was also found acceleration responses which are very close or exceed the limit value. Most of the excessive acceleration responses were found when the passing velocity of the KHST is close to the critical velocity ($V_{cr}$) which causes resonance. No noticeable differences of dynamic responses due to the different materials(steel or concrete) could be found within these experimental results.
This paper examines a high-speed railway CRTS-II ballastless track-bridge system. Using the stationary potential energy theory, the mapping analytical solution between the bridge deformation and the rail vertical geometric irregularity was derived. A theoretical model (TM) considering the nonlinear stiffness of interlayer components was also proposed. By comparing with finite element model results and the measured field data, the accuracy of the TM was verified. Based on the TM, the effect of bridge deformation amplitude, girder end cantilever length, and interlayer nonlinear stiffness (fastener, cement asphalt mortar layer (CA mortar layer), extruded sheet, etc.) on the rail vertical geometric irregularity were analyzed. Results show that the rail vertical deformation extremum increases with increasing bridge deformation amplitude. The girder end cantilever length has a certain influence on the rail vertical geometric irregularity. The fastener and CA mortar layer have basically the same influence on the rail deformation amplitude. The extruded sheet and shear groove influence the rail geometric irregularity significantly, and the influence is basically the same. The influence of the shear rebar and lateral block on the rail vertical geometric irregularity could be negligible.
I형 PSC 거더에 새로운 설계 개념을 도입하여 낮은 형고의 장경간 거더를 설계하고, 실험을 통해서 적용성을 점검하였다. 본 연구에서 제안하는 거더는 복부에 개구부를 도입한 분절형 중공 프리캐스트 프리스트레스트 콘크리트 거더(HWPC거더, Holed Web Prestressed Concrete girders)이다. 이 거더의 설계에는 세 가지 설계 개념이 종합적으로 적용되었다. 먼저 장경간의 거더를 공장에서 프리캐스트로 타설하여 양생을 마친 후에 현장으로 운반하는 방법을 채택하여 현장에서 거더를 제작하는 경우보다 콘크리트의 품질 관리가 용이하게 하여 고강도 및 고성능 콘크리트를 적용하는 것이 가능하게 하였다. 또한 거더를 분절화하여 제작하여 국내의 도로 여건에서도 장경간 거더를 공장에서 현장으로 이동시킬 수 있게 하였다. 이로써 현장에서의 작업 기간도 단축시킬 수 있다. 두 번째로 거더의 복부에 원형의 개구부를 도입하여, 단부 정착장치의 반을 이 개구부 내에 이동하여 분산 배치하여, 분절 거더의 조립에 사용하였다. 개구부에 정착부를 분산 배치하면 단부에 설치되는 정착장치가 줄어들게 되므로 단부에 작용하는 응력이 줄어들게 된다. 아울러 자연스레 단부에 도입되는 휨모멘트는 줄어들고, 중앙부에 큰 휨모멘트가 도입되므로 외력으로 인한 휨모멘트 분포에 더 가까운 형상의 부모멘트를 거더에 도입할 수 있다. 거더에 개구부를 도입하면 거더 자중도 줄어든다. 그리고, 세째로 단부에 설치되는 정착구의 수가 줄기 때문에 단부에서는 다이아프램을 제거하고도 정착이 가능하다. 이렇게 거더의 전 단면에 걸쳐서 같은 폭의 복부폭을 사용하면 거더 제작을 자동화 하는데도 도움이 될 것이다. HWPC거더의 설계 기법을 검증하고, 다단계 긴장의 효과 및 실제교량에 적용할 때 발생할 수 있는 문제점을 고찰하기 위하여 실물 실험을 수행하였다. 길이 50 m, 높이 2 m인 거더 실험체를 분절형과 일체형으로 각각 1개씩 제작하여 휨실험을 수행하고, 결과를 비교하여 분석하였다. 분절형 거더와 일체형 거더는 처짐 및 균열생성 형상에서 근본적으로 유사하였다. 휨 강도, 처짐, 활하중 처짐제한 규정 등이 특정 설계기준을 만족하도록 설계하는 것이 가능하였다.
The basic idea of cable-stayed girder bridges is the utilization of high strength cables to provide intermediate supports for the bridge girder so that the girder can span a much longer distance. In the cable-stayed bridge, the cables exhibit nonlinear behavior because of the change in sag, due to the dead weight of the cable, which occurs with changing tension in the cable resulting from the movement of the end points of the cable as the bridge is loaded. Techniques required for the static analysis of cable-stayed bridges has been developed by many researchers. However, little work has been done on the dynamic analysis of such structures. To investigate the characteristics of the dynamic response of long-span cable-stayed bridges due to various dynamic loadings likes moving traffic loads. two different 3-D cable-stayed bridge models are considered in this study. Two models are exactly the same in structural configurations but different in finite element discretization. Modal analysis is conducted using the deformed dead-load tangent stiffness matrix. A new concept was presented by using divided a cable into several elements in order to study the effect of the cable vibration (both in-plane and swinging) on the overall bridge dynamics. The result of this study demonstrates the importance of cable vibration on the overall bridge dynamics.
In this study, a series of finite element analysis using LUSAS were performed in order to assess the quantitative effects of repair and retrofit of stringer in steel plate girder railway bridge with fatigue cracks. And cutoff types of end part of upper flange were considered as right-angled type and round-angled type. Also, as a method of repair and retrofit of fatigue cracks in stringer, perforation of stop-hole and installation of bracket were considered. From the analysis result, it was possible to assess the fatigue safety and fatigue life of stringer with fatigue cracks, and to estimate the stress intensity factor range in cut-off part of stringer using J-integral method. Also, according
to the method of perforation of stop-hole and installation of bracket, it was possible to calculate the crack propagation life at the cut-off part of stringer.
The Extradosed PSC bridge is one of the best alternates which not only covers the longer span than PSC box girder and also performs the role of landmark facility with much cheaper cost than cable stayed bridge. Since the cable-stayed long span bridge is more flexible than general medium span bridges and railway bridges can be experienced resonance phenomenon by repeated equidistant axle loading of the train, it is inevitable to consider the dynamic behavior on impact, deflection and so on. In the present study, the dynamic behavior of an Extradosed PSC railway bridge subjected to moving train forces is analyzed. As well as trains which operate in conventional railway tines, KTX train is also considered. For the estimation of dynamic performances of the Extradosed PSC bridge, vertical deflection, accelerations of the slab, end rotation of the girder and impact on pylons and cables are discussed.
플레이트 거더교에서 I형은 매우 경제적인 단면으로 넓게 적용되고 있으며 지금까지 복합적층의 패널, 폐단면 리브로 보강된 곡판, 새로운 형태의 리브, 새로운 형식의 강박스거더 압축플랜지 개발 등의 좌굴거동에 대한 연구가 활발히 진행되었다. 하지만 이는 I형 거더의 복부판에서 발생한 국부좌굴의 원인을 정확하게 분석하는데 한계가 있었다. 따라서 본 논문에서는 실제 적용된 I형 거더의 복부판이 도로교설계기준에서 제시하는 최소두께 기준의 만족여부와 보강전과 후에 대하여 유한요소해석 프로그램 LUSAS 17.0을 사용하여 모델링하고 고정하중과 활하중에 대한 선형탄성 좌굴 해석을 수행 후 좌굴발생의 원인을 분석하였다. 보강 전은 1mode의 고유치(λ1) 값이 0.7025로 임계좌굴하중이 작용하중보다 작아 좌굴이 발생하였지만 보강 후는 거더 지점부의 복부판에 수직 및 수평보강재를 추가함에 따라 여기에 Nodal line이 형성되고 좌굴에 대한 저항강도가 증가하여 1mode의 고유치(λ1) 값이 1.5272로 좌굴하중에 대한 안정성을 확보한 것으로 분석되었다. 또한 지점부의 좌굴 흔적을 개선하기 위해 복부판의 일부에 덧댐판을 추가한 보강방안에 대한 좌굴해석 결과 1mode의 좌굴이 복부판의 지점부가 아닌 중앙부에서 발생하였고 고유치(λ1)값이 3.5299로 보강 후보다 2배 이상 커서 향후 지점부의 복부판 보강방안으로는 효과적일 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.