• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.6-16
• /
• 2008

An instable wireless channel condition causes more packet losses and retransmissions due to interference, fading, station mobility, and so on. Therefore video streaming service over a wireless networks is a challenging task because of the changes in the wireless channel conditions and time-constraints characteristics of the video streaming services. To provide efficient video streaming over a wireless networks, QoS-enhanced MAC protocol, IEEE 802.11e, is standardized recently. Tn this paper, we propose a new network-adaptive H.264 video streaming mechanism in the IEEE 802.11e wireless networks. To improve the quality of video streaming services, video stream has to adapt to the changes in the wireless channel conditions. The wireless channel conditions are estimated by the packet loss probability and informed to the application layer by the cross-layering. According to the wireless channel information, the video streaming application filters out the low-priority data. This adaptation mechanism efficiently uses system resources because it drops the low-priority data in advance. Therefore, our cross-layer design can provide improved video streaming services to the end-user. Through the implementation and performance evaluation, we prove that the proposed mechanism improves the QoS of the video streaming by providing the smoothed playback.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.338-344
• /
• 2010

Both ends of welding line are often closed by wall in the welding of ship blocks. In this research, seam tracking sensing system for butt welding in the condition with wall was developed. Seam tracking sensing system measures position of carriage from wall and detects root-pass of welding line. The system consists of the laser displacement sensors and ultrasonic sensors. The laser displacement sensor reciprocal1y rotates by the motor and measures a distance from laser sensor to the welding material. The ultrasonic sensor measures a distance between welding system and walls. The distance measured by the ultrasonic sensor is used to get X(driving) position and to determine initial and end point of the weld line. Y(weaving) and Z(height) of the weld line are obtained by the distance measured by the laser displacement sensor and the orientation of the sensor. The sensing system includes the controller that is independent from the welding carriage. The seam tracking sensing system is attached to both side of welding carriage so that interference between welding torch and sensing system can be avoided during the welding. And both side sensing system minimize dead zone. Finally, developed sensing system was adhered to welding carriage and verified usefulness by experiments.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.4
• /
• pp.13-26
• /
• 2019

The rural areas in South Korea have changed rapidly in the process of national land development. Rural landscapes have become discoloured, and their attractiveness has decreased as cities have expanded. But the attractiveness or multifunctional values of rural areas has become more important in contemporary society around the world. According to this social demand, the efforts of conserving the rural landscape are of high priority and the recovery of ruralism in the area is required. This study has tried to understand how the public image of ruralism in South Korea has been influenced by the news media. The study retrieved news articles using the web searching portal site from the six keywords, commonly used to refer to ruralism, including 'rural landscape', 'rural community', 'rural tourism', 'rural life', 'rural amenity', and 'rural environment'. News data from the six keywords were also collected respectively from within the year-period of 2004-05, 2007-08, 2012-13, and 2016-17. In the text mining analysis, the nouns with high Degree Centrality were figured out, and the changes by year-period were identified. Then, LDA topic analysis was performed for text datasets of six keywords. As a result, the study found that the news articles gave an informed focus on only a handful of issues such as 'poor rural living condition', 'regional or village improvement projects', 'rural tourism promotion projects', and 'other government support projects'. On the other hand, nouns related to virtues and values in the rural landscape were less shown in news articles. These results have become more apparent in recent years. In the topic analysis, 35 topics were identified. 'village development projects', 'rural tourism', and 'urban-rural exchange projects' were appeared repeatedly in several keywords. Among the topics, there are also topics closely related to ruralism such as 'rural landscape conservation', 'eco-friendly rural areas', 'local amenity resources', 'public interest values of agriculture', and 'rural life and communities'. The study presented an image map showing ruralism in South Korea using a network map between all topics and keywords. At the end of the study, implications for Korean rural area policy and research directions were discussed.

• Korean Journal of Weed Science
• /
• v.31 no.1
• /
• pp.84-88
• /
• 2011

This study was established to investigate the effects of seeding depth and seeding time on the emergence, growth, and N production of Vicia tetrasperma and V. hirsuta in 2007 and 2008. All seeds of both species were gathered from Dangjin, Chungnam in late June of 2005 and stored for two year at room temperature. Both V. species began to germinate at the end of June, passed the winter with the seedling stage, rapidly increased their height in April and May, were in full bloom in May, and then withered after entering mid-June. V. hirsuta had higher emergence rate and growth compared to those of V. tetrasperma. The optimum seeding time and seeding depth for a cover cropping was from late August to early September and from 1 to 5 cm, respectively. V. tetrasperma and V. hirsuta had a satisfactory growth and provided 43.8 and $55.4kg\;ha^{-1}$of N, respectively.

• Journal of Plant Biotechnology
• /
• v.37 no.4
• /
• pp.549-555
• /
• 2010

Here we focused on tip-burn and blossom-end rot (BER) symptoms in the tomato plants expressing the constitutively active form of $Ca^{2+}/H^+$ antiporter (sCAX1) and/or a Ca-binding protein (calreticulin, CRT) genes during their whole growth period. Conclusively we demonstrated that CRT is able to suppress the tip-burn and BER symptoms that were induced by sCAX1. Under poor nutrition condition, tomato plants overexpressing sCAX1 showed severe necrotic collapses in both roots and shoot polar tissues, which are in accordance with $Ca^{2+}$ deficient symptoms frequently observed in an agricultural cultivation of tomato. Reciprocal grafting trials using sCAX1 and wild type plants revealed that the tip-burn symptom by sCAX1 overexpression is not caused by hindrance of $Ca^{2+}$ uptake from soil. We constructed CRT overexpressing transgenic tomatoes, and crossed them with sCAX1 transgenic plants to investigate the effects of CRT on the symptoms of sCAX1 transgenic plants. Co-expression of sCAX1 and CRT significantly suppressed the $Ca^{2+}$ deficient symptoms of sCAX1 transgenic plants. Those results suggest the model that $Ca^{2+}$ homeostasis disturbed by the overexpression of sCAX1 may be suppressed by the co-expression of CRT.

• Journal of Hospice and Palliative Care
• /
• v.18 no.3
• /
• pp.208-218
• /
• 2015

Purpose: Although a Do-Not-Resuscitate (DNR) order is widely in use, it is one of the challenging issues in end-of-life care. This study was conducted to investigate attitudes toward DNR according to education and clinical experience. Methods: Data were collected using a structured questionnaire comprising 30 items in a tertiary hospital in Seoul, Korea. Results: Participants were 238 nurses and 72 physicians. Most participants (99%) agreed to the necessity of DNR for reasons such as dignified death (52%), irreversible medical condition (23%) and patients' autonomy in decision making (19%). Among all, 33% participants had received education about DNR and 87% had DNR experience. According to participants' clinical DNR experience, their attitudes toward DNR significantly differed in terms of the necessity of DNR, timing of the DNR consent and post-DNR treatments including antibiotics. However, when participants were grouped by the level of DNR education, no significant difference was observed except in the timing of the DNR consent. Conclusion: This study suggests that the attitudes toward DNR were more affected by clinical experience of DNR rather than education. Therefore, DNR education programs should involve clinical settings.

• Journal of Fashion Business
• /
• v.12 no.5
• /
• pp.1-13
• /
• 2008

This study is largely aimed at presenting ways to improve the working clothes and help companies create more positive images by suggesting designs of the clothes, which take into accounts the corporate image, symbolism, function and aesthetic appreciation through introduction of companies' CIP. And, it is significant to propose working clothes development condition and process with introduction of companies' CIP(Corporate Identity Program : work that systematize and simplify visually images which companies or public bodies have) A way of this study was made up with working clothes design development process which a student planned. First of all, this study looked into Company D's Corporate Identity Program(CIP) to develop the design that corresponds with the characteristics of the company's favorite design, working environment and demands of the employees. And, then, the study conducted a survey of 30 employees and intensive interviews with heads of four teams including the Safety Team, the Working Clothes Management Team and the General Affairs Team to find out the requirements of the clothes and the characteristics of the company. Based on them, the concrete image that the company pursues and the direction of design were set up through image positioning. In the end, three different concept designs were presented through image-mapping and the concrete design of each item was developed. A total of seven items including upper and lower garments (a jacket and trousers) for the spring-summer seasons, upper and lower garments (a jumper and trousers) for the winter season, cold-protecting vest and winter clothes (a coat and trousers) were presented in accordance with the three concepts. One of the concept designs, which was selected through evaluation by employees of Company D, was produced as a sample and then the final design was chosen after a discussion attended by the head of each team and representatives of the employees. Based on the aforementioned design planning, one design was selected from each of the three concept designs for production. And each of these was requested to special production enterprise and manufactured. Following the result of study, by looking into a case of a practical joint design project between a university and a company, this study suggested ideas for business to improve working clothes through the academic-industrial cooperation and presented conditions and process of design development. And, this study also aims to examine the feasibility of academic-industrial cooperation based on the cases in which enterprises and universities staged joint projects to develop working clothes.

• Journal of the Korean Society of Food Culture
• /
• v.3 no.4
• /
• pp.391-396
• /
• 1988

The method for the measurement of texture hardening phenomena, which is the limiting factor of shelf-life of Yaksik in the market, was established. The changes in the hardening rate by the processing conditions and the storage temperature and time were examined. The standard sample made by traditional method could be kept at room temperature$(20{\circ}C)$ for 3 days and the multipuncture force measured at the end of marketable quality was 700g. The hardening rate increased rapidly by storing at $5^{\circ}C$ and the ratio of hardening rate constants between room temperature and $5^{\circ}C$ storage reached to $1.3{\sim}3.3$ depending on the processing condition. The largest ratio was observed by the sample made from pressure cooker. The addition of corn syrup retarded the hardening rate. The pressure cooking resulted in making too soft product, which diminished the panel preference, but it extend the shelf-life when products were stored at $5^{\circ}C$ microwave cooking resulted in making too hard texture which was not acceptable. The overall quality preference of Yaksik was decided by the textural preference and the latter showed significant inverse correlation with the maximum force of multipuncture test. Therefore, it was concluded that multipuncture test was useful for the measurement of the quality of Yaksik.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.3
• /
• pp.27-27
• /
• 1987

The purpose of this study is to find the light intensity which induced maximum gathering rate and to observe the variation of the gathering rate both at daytime and night by using Sea-bass, Epinephelus septemfasciatus (Thunberg). An experimental tank (360 L×50 W×55H cm) was set up in a dark room. An illumination system was attached to the end of one side of the tank to control horizontal light intensity. Eight artificial light sources were prepared by combination of three with white light bulbs (10W, 60W, 100W) and eight filters. During the experiment water depth was maintained 50cm level in the tank. The tank was marked into six longitudinal sections each being 60cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 50 minutes before the main experiment. Upon turning on the light, the number of fish in each section was counted 60 times every 30 seconds, and the gathering rate was obtained from the average number of fish in each section. The light intensity inducing maximum gathering rate was 24.13 lux (15.25~35.93 lux) at daytime and 0.41 lux (0.25~0.63 lux) at night. The variation of the gathering rate of fish in illumination time was great and did not show any definite pattern but fluctuated irregularly. Its different between daytime and night is remarkable.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.3
• /
• pp.137-143
• /
• 1987

The purpose of this study is to find the light intensity which induced maximum gathering rate and to observe the variation of the gathering rate both at daytime and night by using Sea-bass, Epinephelus septemfasciatus (Thunberg). An experimental tank (360 L$\times$50 W$\times$55H cm) was set up in a dark room. An illumination system was attached to the end of one side of the tank to control horizontal light intensity. Eight artificial light sources were prepared by combination of three with white light bulbs (10W, 60W, 100W) and eight filters. During the experiment water depth was maintained 50cm level in the tank. The tank was marked into six longitudinal sections each being 60cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 50 minutes before the main experiment. Upon turning on the light, the number of fish in each section was counted 60 times every 30 seconds, and the gathering rate was obtained from the average number of fish in each section. The light intensity inducing maximum gathering rate was 24.13 lux (15.25~35.93 lux) at daytime and 0.41 lux (0.25~0.63 lux) at night. The variation of the gathering rate of fish in illumination time was great and did not show any definite pattern but fluctuated irregularly. Its different between daytime and night is remarkable.