• 한국농림기상학회지
• /
• 제9권3호
• /
• pp.170-178
• /
• 2007

지난 수 세기 동안 온실기체와 기타 화학적으로 중요한 미량기체들이 급격하게 증가하였다. 이러한 주요기체가 기후 변화에 미치는 영향을 이해하기 위해서는 각 기체들의 흡원과 발원을 규명하고, 생물권과 대기권 사이에서 발생하는 생물 기원 기체 플럭스들을 특성화하며, 주요 기체를 조절하는 프로세스들을 이해해야 한다. 본 논문에서는 야외 실험을 위한 실용적 방법인 enclosure 기반의 관측법을 소개한다. 특히, 토양표면에서 방출되는 일산화질소 플럭스에 대한 enclosure내에서의 질량수지 방정식과 flow-through dynamic 플럭스 챔버 기법의 민감도를 제시하고 flow-through dynamic 플럭스 챔버 방법의 물리적인 시스템과 이론을 소개한다. 또한 챔버 벽에서 발생하는 일산화질소의 손실을 고려하므로써 새로운 플럭스 계산식을 소개하였고 그 계산식의 불확실성을 논의하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E2호
• /
• pp.61-70
• /
• 2001

In recent years there have been growing interests in the potential environmental effects of global climate change. Of specific interests is the role that climate change may play in altering natural volatile organic compound.(NVOC) emissions from trees and the subsequent impact of this perturbation on air quality and ozone formation. A novel vegetation enclosure chamber method was designed and constructed of Tedlar in order to estimate more accurate and precise NVOC emission rates of either small whole plants or the branches of large trees. The enclosure chamber was initially tested in the laboratory and also successfully evaluated in the field. Overall precision for this enclosure was estimated as RSD<10%(n=9). The overall errors associated with the enclosure method in a laboratory system might be relatively small (say<$\pm$15%); however, they might be rather large(say$\pm$40%) in a field-based system. Two consecutive samples were collected on each sampling day from the two pine species during the test period. Slash pine studies showed that the absolute percentage difference between the first and second samples varied from 0.33 to 29%. The percent differences between consecutive emission for loblolly pines varied from 0.74 to 24.2%.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.42-48
• /
• 2016

This study presents an experiment investigation on natural convection heat transfer of air-cooling Proton exchange membrane fuel cells (PEMFCs) in a enclosure system for unmanned aerial vehicles (UAVs). Considered are replacing fuel cell stack with Aluminum block for heat generating inside a enclosure chamber. The volume ratio of fuel cell stack and chamber for simulation to the actual size of aerial vehicle is 1 to 15. The parameters considered for experimental study are the environmental temperature range from $25^{\circ}C$ to $-60^{\circ}C$ and the block heat input of 10 W, 20 W and 30 W. Effect of the thermal conductivity of the block and power level on heat transfer in the chamber are investigated. Experimental results illustrate the temperature rise at various locations inside the chamber as dependent upon heat input of fuel cell stack and environmental temperature. From the results, dimensionless correlation in natural convection was proposed with Nusselt number and Rayleigh number for designing air-cooling PEMFC powered high altitude long endurance (HALE) UAV.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.105-108
• /
• 2004

This paper describes the influence of conducting particle in the coaxial cylindrical electrodes under alternating voltage condition investigated using breakdown electric field and electro magnetics simulation method. Simulated particle-location in GIS chamber were the particle on electrode, the particle on enclosure and free moving particle. As results, it was founded that in case of breakdown electric field of the GIS chamber, breakdown electric field of particle on electrode was the lowest, that of free moving particle was middle and that of particle on enclosure was the highest. And in case of the electric field analysis with particle locations, electric field of particle on electrode was the highest that of lifted particle was middle and that of particle on enclosure was the lowest. This results can offer a practical reference ra the insulation design of domestic GIS.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1993년도 학술논문발표회 논문집 제12권 1호
• /
• pp.68-72
• /
• 1993

A method to measure the distortions of the loudspeaker at low frequencies without an anechoic chamber is proposed. This method utilizes the fact that the n-th harmonic distortion outside the enclosure is boosted by 40log n dB compared to that inside the enclosure. By compensating for the effect of standing waves occuring inside the enclosure, it is possible to predict the distortions for wide frequency ranges below the first break-up frequency of the diaphragm. The method is applicable to the intermodulation distortion as well.

• 한국음향학회지
• /
• 제1권1호
• /
• pp.19-26
• /
• 1982

n optimization technique is adapted to determine the stage enclosure configuration preferred by performers. The merit function which quantifies the ease of ensemble among the performers is derived from a set of qualitative conditions recommended by researchers of hall acoustics. The ray path tracing technique based on the modified method of images is used to analyze acoustical characteristics at any locations of performers in stage enclosure. The gradient search technique is employed to find the geometric parameters which maximmize the merit function. As an example, optimum stage enclosure configuration of the trio chamber music is obtained using the computer program developed. The developed technique can be used in the design of concert hall stage and also in forming a special enclosure with movable reflecting surfaces.

• 조명전기설비학회논문지
• /
• 제15권5호
• /
• pp.14-19
• /
• 2001

전계해석법을 이용하여 나타내었다. 이때 모의한 GIS 챔버내 금속이물의 위치는 전극부착시, 외함부착시 그리고 자유운동시로 하였다. 그 결과 GIS챔버의 절연파괴전계의 경우, 전극에 파티클 부착시가 가장 작게 나타났고, 파티클 자유운동시가 중간, 외함에 파티클 부착시가 가장 작게 나타남을 알 수 있었다. 또한 파티클 위치에 따른 전계해석의 경우 전극에 파티클 부착시가 가장 크게 나타났고, 파티클 자유운동시가 중간, 외함에 파티클 부착시가 가장 작게 나타났다. 이 결과는 국내 GIS의 절연설계에 설제적인 참고자료가 될 것으로 사료된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1026-1031
• /
• 2003

A vibration isolation system fur a large reverberation chamber (1,228㎥, 1,000ton) has been installed. The reverberation chamber generates loud noise and induces high level of vibration to perform spacecraft acoustic environmental tests. The isolation system prevents vibration transfer from the chamber to enclosure buildings. This paper describes logical design process and commissioning experiments of the system. Design criteria have been induced from rigid body model of the chamber. Finite element model has been employed to select the characteristics of rubber pads. A total of 21 rubber pads have been installed between the chamber and supporting pedestals. A sand bag of 800kg was dropped on the chamber floor to measure the natural frequency of the isolation system. Absolute transmissibility has been measured while generating 145㏈ in the chamber. The natural frequency of the chamber is 10.5㎐, which is 80% of estimated value. Overall transmissibility at working frequency range (25㎐-10,000㎐) is less than -6㏈.

• 한국전자파학회논문지
• /
• 제12권5호
• /
• pp.837-843
• /
• 2001

전자파 잔향실은 일반적으로 직사작형 구조의 차폐실에 전자기장 균일도를 향상시키기 위한 모드 스터러 또는 모드-튜너로 구성된다. 본 논문은 기존에 많이 사용되는 직사각형의 잔향실 구조 대신 두 종류의 비대칭 구조를 사용하였을 경우의 전자기장 균일도 개선효과에 관하여 검토한 것이다. 하나는 Quadratic Residue Diffuser (QRD)를 사용한 비대칭 구조, 그리고 다른 하나는 Randomly Made Diffuser(RMD)를 사용한 비대칭 구조의 전자파 잔향실이다. Finite-Difference Time-domain(FDTD) 수치해석 방법을 사용하여 두 종류의 전자파 잔향실에 관한 전자기장 균일도 특성을 조사하였다.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1066-1074
• /
• 2004

A vibration isolation system for a large reverberation chamber (1,228 $m^3$ and 1,000 ton) has been installed and verified. The reverberation chamber generates loud noise and induces high level of vibration while performing spacecraft acoustic reliability tests. The isolation system prevents vibration transfer from the chamber to the enclosure buildings. This paper describes design process and commissioning experiments of the system. Design criteria have been derived from rigid body model of the chamber. The stiffness of neoprene pads has been selected by employing finite element analysis of the reverberant chamber and isolation system. A total of 21 neoprene pads have been installed between the chamber and supporting Pedestals. A sand bag of 800kg was dropped on the chamber floor to measure the natural frequency of the isolation system. While 136.9 dB noise is generated in the chamber, absolute transmissibility of the isolation system has been measured. The measured natural frequency of the chamber is 10.2Hz, which is 80% of the predicted value. Overall transmissibility at working frequency range (25∼10.000 Hz) is less than -12.4 dB.