• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.560.1-560
• /
• 2001

To evaluate the micro-shear bond strength of current adhesive systems to cervical and mid-coronal enamel. Materials and Two commercially available resin adhesives were investigated; a self-etching primer system(Clearfil SE Bond, Kyraray) and a one-bottle adhesive system(Single Bond, 3M) intended for use with the total-etch wet-bonding technique were employed. Two regions of enamel, cervical and mid-coronal regions, were chosen from the buccal surface of extracted molars and were then bonded with each adhesive system and submitted to the micro-shear bond test.(중략)

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.67-74
• /
• 2020

To predict the thermal deformation of an oven cabinet during the enamel process, we propose a simple finite element analysis method comprising two steps: heating and cooling. To this end, the basic mechanical and thermal properties such as thermal expansion of the enamel and steel plate were experimentally studied, and the mechanical properties of four different stainless steel (SUS) plates were evaluated to select the target material for the oven at high temperature conditions from 400 ℃ to 700 ℃. In the first analysis step of the enamel process, the SUS plate was heated to 850 ℃ and was then thermally expanded without considering the enamel coating. Next, assuming the perfect bonding of two materials (enamel coating and metal plate), the enamel plate was allowed to cool to room temperature till 22 ℃. From the results of comparing the experimental and analytical data, we can make a conclusion that the proposed method can be applied to evaluate the thermal deformation of enamel products. Especially, the thermal deformation of the oven can be predicted with different enamel coating conditions, such as uniform and nonuniform coating thickness.

• 대한치과교정학회지
• /
• 제35권1호
• /
• pp.43-50
• /
• 2005

본 연구는 교정용 브라켓 부착 시 사용되는 접착제 중 two paste type의 실런트 레진 적용이 법랑질 탈회에 미치는 영향을 알아보고자 시행되었다. 건전한 표면을 가진 발치된 소의 상악절치 48개를 실험재료로 하여 법랑질 처리 방법에 따라 4개 군으로 분류하고 각 군을 Phase II (Reliance, Itasca III)를 이용하여 치면처리 하였다. 대조군으로서 아무런 처리를 하지 않은 Group 1.37% 인산으로 30초간 산부식을 시행한 Group 2, 산부식 후 실런트 A와 B를 동량으로 혼합하여 도포한 Group 3과 산부식 후 실런트를 도포하고 레진 페이스트 A와 B를 동량으로 혼합하여 도포한 Group 4로 분류하여 각 군을 인공탈회용액에서 탈회시킨 다음 공초점 레이저 주사현미경을 이용하여 각각의 탈회된 깊이를 측정한 후 비교한 결과, 탈회된 법랑질의 평균 깊이는 $47.4{\mu}m$ (Group 1). $61.8{\mu}m$ (Group 2). $13.9{\mu}M$(Group 3) $8.2{\mu}n$ (Group 4) 로 나타났다. 산부식 후 인공탈회용액에 노출되는 군 (Group 2) 은 산부식 없이 노출도는 군 (Group 1) 센 비해 탈회된 깊이가 더 깊은 것으로 나타났으며 (p<0.05) 실런트 레진을 도포한 군 (Group 3: 은 산부식 없이 노출되는 군 (Group 1)이나 산부식 후 노출되는 군 (Group 2) 에 비해 탈회된 법랑질 깊이가 유의성 있게 감소하였다. (p<0.05). 접착레진으로 부착된 군 (Group 4)은 법랑질 탈회가 거의 나타나지 않았다. 이상의 연구결과는 교정치료 시 법랑질 탈회 가능성을 줄이기 위해서 브라켓 부착 시 실런트 레진의 도포가 유용함을 시사하였다.

• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.43-65
• /
• 1992

Bonding orthodontic adhesive resins to glazed porcelain surface is not attainable. The aim of this investigation was to examine, in vitro, the effect of three methods of porcelain surface pretreatment on the shear bond strength of orthodontic adhesives, and to compare the shear strength of orthodontic bracket bonding to porcelain surface by the best results that to human enamel. Porcelain disks ($Ceramco^{(TM)}$ and $Vita^{(TM)}$) baked in the laboratory were roughened by sandpapers, #320, #600, #800, #1000 and #1200, and were pretreated with silane and dried at the various temperatures, room temperature, $50^{\circ}C$, $70^{\circ}C$ and $90^{\circ}C$, and were etched by 3% hydrofluoric acid solution for 1, 3, 5, 7, and 9 minutes, orthodontic adhesives (System $1+^{(TM)}$ and $Unite^{(TM)}$) were applied on them, and shear bond strengths were measured by Instron. The best results of pretreatment of each method were determined by the shear bond strengths. Again, porcelain disks were pretreated by the determined best results and human enamel were etched by 37% hydrofluoric acid solution, orthodontic brackets were bonded on them by the orthodontic adhesives, and the shear bond strengths were measured and compared between them. 1. Roughening porcelain surfaces with coarse sandpaper (#300) showed higher shear bond strength than that with finer sandpapers, but it $(22.44Kgf/cm^2)$ was distinguishably low compared to that from etched human enamel $(144.11Kgf/cm^2)$. 2. There were disparities in shear bond strengths upon the orthodontic resins, which was presumably related to the contents of fillers in orthodontic adhesive resins. Also there were disparities in shear bond strength upon the porcelains which had different composition. 3. Silane enhanced the shear bond strength of orthodontic resins to porcelain surfaces ($25.20Kgf/cm^2$ at $50^{\circ}C$), which was markedly low compared to that from etched human enamel. 4. Etched porcelain surface with 3% hydrofluoric acid solution for 1 to 9 minutes showed no difference in shear bonding strength of orthodontic adhesive resins. Shear bond strength from etched porcelain $(97.43-120.72Kgf/cm^2)$ were as high as clinically available, but low compared to that from etched human enamel. 5. Roughening with #300 sandpaper and etching by 3% hydrofluoric acid followed silane application on porcelain surface showed lower shear bond strength than etched human enamel, but were as high as clinically useful. 6. The results suggest that etching porcelain surface by 3% hydrofluoric acid solution might provide comparatively high shear bond strength as much as clinically favorable.

• 대한치과보철학회지
• /
• 제52권3호
• /
• pp.165-176
• /
• 2014

목적: 상아질 지각과민증의 치료를 위해 사용되는 지각과민 처치제의 효과는 일시적인 것으로 보이며 이는 상당부분 칫솔질에 의한 마모소실로 판단된다. 지각과민 처치제의 칫솔질에 의한 마모를 감소시키기 위해 bonding resin을 지각과민 처치제에 추가 도포하여 칫솔질 시행 후 상아질 투과도의 변화에 대해 연구하였다. 재료 및 방법: 우식이 없는 치아를 이용하여 1 mm 두께의 치관부 상아질 디스크를 제작한 다음, All-Bond 2$^{(R)}$, Seal & Protect$^{(R)}$, Gluma$^{(R)}$, MS Coat$^{(R)}$의 4 종류의 지각과민 처치제만 처리한 시편과 Dentine/Enamel Bonding Resin$^{(R)}$ (Bisco Inc.)을 추가로 도포한 시편에 대해 처리하기 전과 처리한 후, 1주(왕복 140회), 2주(왕복 280회), 6주(왕복 840회)에 해당하는 칫솔질을 적용한 후에 측정한 hydraulic conductance (Lp)와 주사 전자 현미경 사진을 비교 분석하였다. 결과: 지각과민 처치제 만을 처리한 군과 bonding resin (Dentine/Enamel Bonding Resin$^{(R)}$)을 추가 도포한 군 모두에서 처리 직후 hydraulic conductance가 급격히 감소하였다. 지각과민 처치제만 처리한 군과 bonding resin을 추가 도포한 군 간의 hydraulic conductance를 비교한 결과 All-Bond 2$^{(R)}$, Gluma$^{(R)}$, MS Coat$^{(R)}$와 bonding resin을 도포한 군에서는 1주(왕복 140회), 2주(왕복 280회), 6주(왕복 840회)의 칫솔질을 시행한 후 hydraulic conductance가 지각과민 처치제만 도포한 군에 비해 현저히 낮았고, Seal & Protect$^{(R)}$ 에서는 6주(왕복840회)의 칫솔질을 시행한 후에만 같은 결과를 보였다. 주사 전자 현미경 관찰에서 지각과민 처치제만 처리한 군과 bonding resin을 추가로 도포한 군 모두에서 처리 직후에 상아세관이 완전히 폐쇄되거나 일부만 폐쇄되어 상아 세관의 내경이 감소된 양상을 볼 수 있었으나, 6주(왕복 840회) 칫솔질 시행 후에는 bonding resin을 추가 도포한 군에서만 현저하게 폐쇄 또는 내경이 감소된 상아세관이 관찰되었다. 결론: 지각과민 처치제 처리 후 bonding resin (Dentine/Enamel Bonding Resin$^{(R)}$, Bisco Inc.)을 추가 도포하는 것이 지속적인 상아세관 폐쇄에 효과적임을 알 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.77-83
• /
• 1981

The purpose of this study was to observe the bonding strength between tooth surface (enamel and dentin) and restorative filling materials which are two composite resins (Clearfil and Concise) and Glass ionomer cement, after etching with 50% phoshoric acid and 37% citric acid. To measure the bonding strength in enamel, the labial surface of upper anterior tooth was cut flatly with using carborundum disk and polished with sand paper disk, and to measure in dentin, the dentin surface was prepared by grinding upper part of posterior tooth horizontally. After washing the tooth surface with water and drying with air blast, the prepared tooth surface was etched. In glass ionomer cement, 50% phosphoric acid and 37% citric acid were used, in Clearfil 40% phosphoric acid was used and in Concise, 50% phosphoric acid and 37% citric acid were used as etchant for 1 minute. After the copper band which is 5 mm in diameter and 5 mm in height was fixed on the prepared surface and each filling material was inserted into the copper band, the hooking loop was inserted into filled material in the copper band before setting to make it easily that the load is applied on the specimen. After all specimens were immersed in water at $37^{\circ}C$ for 1 week, this specimen was placed on the load cell of tensile test apparatus, and specimen was pulled at the cross-head speed of 0.8 mm per minute. The following results were obtained 1) In glass ionomer cement, the bond strength obtained by 37% citric acid was higher than one obtained by 50% phosphoric acid in enamel and dentin surfaces. The bond strength obtained in non-etched surface was much less than one by etchants in enamel and dentin surface. 2) In Clearfil, the bond strength obtained by 40% phosphoric acid was 4 times more than one obtained by non etch ant. 3) In Concise, the bond strength obtained by 50% phosphoric acid was almost same as one obtained by 37% citric acid, and the bond strength obtained by non etch ant was much less than one obtained by etchants.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.957-967
• /
• 1994

The purpose of this study was to evaluate the effects of different bases of ceramic brackets on shear bond strength and to observe failure patterns of bracket bondings. Lower bicuspid brackets whose bases designed for the macromechanical and silane treated chemical bonding those for silane treated chemical bonding, those for micromechanical bonding, and those for macromechanical bonding were tested as experimental groups, and foil mesh-backed metal brackets as a control group. All the brackets were bonded with $Mono-Lok\;2^{(TM)}$ on the labial surface of extracted human lower bicuspids after etching the enamel with $38\%$ phosphoric acid solution for 60 seconds. The shear bond strengths were measured on the universal test machine after 24 hours passed in the $37^{\circ}C$ water bath. The gathered data were evaluated and tested by ANOVA and Duncan's multiple range test, and those results were as follows. The shear bond strengths of brackets for macromechanical and chemical bonding, those for chemical bonding, and those for micromechanical bonding were not different (p>0.05), but showed statistically higher than those of metal bracket and those of ceramic bracket for micromechanical bonding(p<0.05). The shear bond strengths of ceramic bracket for micromechanical bonding showed statistically lower than those of metal bracket(p<0.05). The enamel fractures and/or ceramic bracket fractures were observed in the cases of higher bond strength than that of metal bracket. These results supported that silane treated base of ceramic bracket show higher shear bond strength than that of metal bracket, and suggested that micromechanical form of ceramic bracket bases show higher shear bond strength than that of macromechanical form.

• 대한치과교정학회:학술대회논문집
• /
• 대한치과교정학회 1998년도 제31회 학술대회
• /
• pp.80-80
• /
• 1998

• 구강회복응용과학지
• /
• 제24권2호
• /
• pp.147-155
• /
• 2008

5세대 상아질 접착제인 Adper Single bond 2.0 (3M-ESPE, USA), 6세대 상아질 접착제인 Prompt L-pop (3M-ESPE, USA), AdheSE (Ivoclar Vivadent, Liechtenstein) 를 각 상아질 접착제당 30개의 건전한 소구치 및 대구치를 선정하여 협면과 설면에 5급와동을 형성하고 복합레진을 적용하였다. 이중 절반은 열순환을 시행하지 않고 나머지 절반은 열순환을 시행하였다. 이후 메틸렌 블루를 침투시켜 시약의 침투 정도를 측정한 후 통계분석하였다. 열순환을 시행하지 않은 군과 열순환을 시행한 군을 통틀어 열순환을 시행하지 않은 상아질 군에서만 Single Bond 2.0의 미세누출의 양이 Prompt L-Pop과 AdheSE에 비하여 높았고 (p <.05) 나머지 군에서는 모두 Single Bond 2.0의 미세누출의 양이 적었다. (p <.05) 열순환 이후에 미세누출의 양이 늘어난 군은 Prompt L-Pop과 AdheSE의 상아질 군이었다.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.153-161
• /
• 2001

The purpose of this study was to evaluate microleakage of six current dentin bonding systems. In this in vitro study, class V cavities were prepared on buccal and lingual surfaces of thirty extracted human molars. Each margin was on enamel and dentin/cementum. Experimental teeth were randomly divided into six groups of 5 each. Group 1 : Scotchbond Multi-Purpose; Group 2 : Single Bond; Group 3 : Prime&Bond NT ; Group 4 : Clearfil Liner Bond 2 ; Group 5 : MAC Bond II ; Group 6 : One-up Bond F. The bonding agent and composite resin were applied to class V cavities according to manufacturer's directions. After thermocycling, the specimens were immersed in 0.5% basic fuchsin dye solution for 6 hours and sectioned longitudinally through the center of the restoration with a low speed diamond saw. The degree of microleakage was measured as the extent of dye penetration under the stereomicroscope at $\times$20. The data were analyzed using one way ANOVA. When significant differences found. multiple comparisons were made using Duncan's Multiple Range Test. The results of this study were as follows: 1. In all groups, leakage value seen at the enamel margin was significantly lower than that seen at the dentin margin(P<0.001). 2. At the enamel margin, none of the dentin bonding systems used in this study showed statistically significant difference in leakage values(P<0.05). 3. At the cementum margin, group 3 showed the highest leakage value, and others were decreased as group 5, 6, 4 in that order, and group 1, 2 showed the lowest leakage value. There was statistically significant difference between group 3 and the other groups except for group 5(P<0.05).