• KSBB Journal
• /
• 제31권4호
• /
• pp.256-262
• /
• 2016

The need for natural cosmetic ingredients has been increasing over the world nowadays. Agarose, a natural polymer from red seaweeds, has high hydrophilic character and a function of scaffolder. As skin moisturizer, agarose is adequate for percutaneous absorption. While, blueberry fruits extract possesses rich procyanidins and anthocyanins which show health benefits, anti-oxidant effect, anti-aging and anti-melanogenesis. Stability, sensory preference, skin trouble of the emulsion formula are important for cosmetic product development. In this study, we manufactured an emulsion formula for skin moisturizers using the two ingredients and tested emulsion stability and skin trouble. Total phenolic contents of the blueberry fruits extract were evaluated as well as tyrosinase inhibitory and collagenase inhibitory activities. $IC_{50}$ values of blueberry fruits extract for anti-tyrosinase and anti-collagenase activities were 168 and $112{\mu}g/mL$, respectively using gallic acid as a control ($64.8{\mu}g/mL$). The stability (pH and viscosity) of the formula containing 2% blueberry fruits extracts and 0.1% agarose was measured at five different temperatures (room temp., $25^{\circ}C$, $55^{\circ}C$, $45^{\circ}C$, $55^{\circ}C$) under the sun light at 2 day intervals for 12 days. There has been little pH change at the different temperatures. According to the sensory evaluation, there was no significant flavor, discoloration and physical changes of the formula at $25-65^{\circ}C$. These results suggest that emulsion formula containing blueberry extract and agarose could be used as a candidate for lotion and essence products.

• Journal of Pharmaceutical Investigation
• /
• 제20권2호
• /
• pp.55-64
• /
• 1990

Soybean fatty acid, the largest byproduct in the production of soybean oil, was formulated for hand cream, oil in water emulsion base, to improve the suppleness and elasticity of skin. The stability of emulsion observed by a macroscopic method was used as a characteristic index for deciding an optimum formula of hand creams. The optimum formula of the most stable hand cream was obtained from polynomial regression equation, contour graphs and partial derivative graphs. The values of soybean fatty acid and stearyl alcohol in the obtained optimum formula were 9.75 and 14.75 w/w%, respectively, and sodium lauryl sulfate was not needed. Experimental value for the stability of hand cream prepared according to the optimum formula was 76,14 days, and the prediction value by computation method was 73.25 days. From the results of accelerated tests by elevated temperature, the stability of hand cream by optimum formula was 1.7 year at room temperature $(25^{\circ}C)$. The hand cream containing soybean fatty acid was found to be free of primary irritant substance to the skin by Draize technique.

• 한국축산식품학회지
• /
• 제38권3호
• /
• pp.580-592
• /
• 2018

The formulation of an oil/water (o/w) emulsion made up of a mixture of perilla oil and canola oil (30/70 w/w) was optimized using a response surface methodology to find a replacement for animal fat in an emulsion-type meat product. A 12 run Plackett-Burman design (PBD) was applied to screen the effect of potential ingredients in the (o/w) emulsion, including polyglycerol polyricinoleate (PGPR), fish gelatin, soy protein isolate (SPI), sodium caseinate, carrageenan (CR), inulin (IN) and sodium tripolyphosphate. The PBD showed that SPI, CR and IN showed promise but required further optimization, and other ingredients did not affect the technological properties of the (o/w) emulsion. The PBD also showed that PGPR played a critical role in inhibiting an emulsion break. The level of PGPR was then fixed at 3.2% (w/w total emulsion) for an optimization study. A central composite design (CCD) was applied to optimize the addition levels of SPI, CR or IN in an (o/w) emulsion and to observe their effects on emulsion stability, cooking loss and the textural properties of a cooked meat emulsion. Significant interactions between SPI and CR increased the cooking loss in the meat emulsion. In contrast, IN showed interactions with SPI leading to a reduction in cooking loss. Thus, CR was also removed from the formulation. After optimization, the level of SPI (4.48% w/w) and IN (14% w/w) was validated, leading to a perilla-canola oil (o/w) emulsion with the ability to replace animal fat in an emulsion-type meat products.

• 약학회지
• /
• 제39권5호
• /
• pp.487-494
• /
• 1995

Solid lipid microspheres (SLMs) were prepared using various lipids and solidifying agents, in order to enhance the gastrointestinal absorption of Cyclosporine A (Cs A) which is a practically water-insoluble drug with low systemic bioavailability. Egg lecithin and HCO-60 (polyoxyethylated 60 mol, hydrogenated castor oil) were used as lipids. Stearic acid and stearyl alcohol were used as solidifying agents. Emulsion concentrates containing Cs A were prepared by mixing the melted lipid and solidifying agent with water, employing bile salts as a cosurfactant. SLMs were obtained by dispersing the warm emulsion concentrate in cold distilled water under mechanical stirring, followed by freeze drying. Physical characteristics of each SLM were investigated by particle size analysis, optical microscopy and scanning electron microscopy. Mean particle size of SLMs was in the range of 30 to 40.mu.m. The SLMs were in good appearance with spherical shape before freeze drying, but were deformed partially after freeze drying. Drug loading efficiencies of SLMs were observed as high as 80 to 90% in average. The systemic bioavailability of Cs A from different SLM formula was investigated in rats following oral administration. Cs A in whole blood was extracted and assayed by HPLC. SLMs revealed the higher bioavailabilities than the standard formula based on the marketed product. SLMs might have several advantages over standard formula for enhanced gastrointestinal absorption, controlled release properties, high loading capacity of the water-insoluble drug, and feasibility of solid dosage forms with better stability in storage.

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.67-75
• /
• 2000

Cosmetic industries have recently developed sun-block products, which are composed of W/O or O/W emulsion system. It was very difficult for waterproofing product to show the stability in W/O emulsion with $TiO_{2}$. To enhance the stability of W/O emulsion, it needs to be combined with the water and oil soluble components as the gelling agents. The emulsifiers used in W/O were 3.0% of cetyl dimethicone copolyol, 2.0% of sorbitan sesquioleate as the basic emulsifiers, and 0.6% of quaternium-18 bentonite and 1.5% of dextrin palmitate as stabilizer were used. The content of titanium dioxide was optimized up to 8.0%. Titanium dioxide was used as the UV scattering powder coated with $Al_{2}O_{3}$(UV-sperse T40/TN). The sunscreen cream prepared with W/O emulsion system by using QB and DP showed higher stability than that of W/O emulsion system by using each QB and DP. W/O emulsion from Formula 3 for passing one year was very durable more than F1 and F2. Within W/O emulsion by observing F1, F2 and F3 for one year, F3 was more excellent than F2 and F3 when they were observed at RT, $4^{\circ}C$, $40^{\circ}C$, because F3 used the mixed QB and DP in W/O emulsion. The zeta potential for F1, F2, and F3 after one year were 21, 30 and 43, respectively. From these result F3 was found best stable emulsion. The in-vitro SPF value for F3 was 35 for the initial product at room temperature and also, the in-vitro SPF values of F3 was 32 for after one year. Finally, the mean in-vivo SPF value of 10 volunteers for F3 was 27.3 by the Korea cosmetic association made the rules of SPF.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.67-70
• /
• 2010

This study investigates the physical properties of the acrylic emulsion mortar according to variable composition set of redispersible emulsion powders. This materials have to be composed of many types of binders and chemical additives. So it is difficult to decide suitable mixing proportion of composition materials. The redispersible emulsion powders using "2, 4, 6, 8kg" of EVA polymers dispersion ranges are prepared with acrylic emulsion mortars and were tested for basic characteristics such as flexural, and compressive strength, wheel load. Through experiments we found that the improved formula to satisfy the standard of wheel load by EVA polymers, and the masration rangs between about 2.0% to 2.6% which the white portland cenmet and EVA polymers is good for resistauce wheel load.

• 대한본초학회지
• /
• 제21권2호
• /
• pp.47-53
• /
• 2006

Objectives : This study was conducted to determine if Scutellaria baicalensis can be used in cosmetic emulsion cream for patients with atopic dermatitis. Methods : Scutellaria baicalensis extract was obtained with the use of butylene glycol through the pressurized solvent extraction(PSE). The antioxidative activity was assessed through SOD-like activity measurement and skin irritating potential was tested using human patch test. Antimicrobial activity was measured by the clear zone formed against Staphylococcus aureus and Escherichia coli and the rheological effects on the emulsion creams were examined using oscillation test. Results : The SOD-like activity increased dose-dependently and was about 90% at 1,000ppm of Scutellaria baicalesis extract. And Scutellaria baicalensis extract did not show any potential to be irritating to the human skin, but it could not be used as an antimicrobial agent for its poor antimicrobial activity against Staphylococcus aureus. The complex modulus decreased by 1,000 pascals and the loss angle also decreased by 20% with the addition of Scutellaria baicalensis extract into the cosmetic emulsion creams, that is, the extract can confer more elastic property on the vehicle. Conclusion : From those results, Scutellaria baicalensis extract can be effectively used as an antioxidant and reinforces the elastic skincare film formed by the application of cream for patients with atopic dermatitis.

• 화약ㆍ발파
• /
• 제24권1호
• /
• pp.29-37
• /
• 2006

최근 국내 터널현장에서 기계식 장전장비를 활용한 벌크에멀전 (bulk emulsion) 폭약의 수요가 증가되면서 국내 암반 및 주변여건에 적합한 발파의 합리적인 설계기준이 요구되고 있다. 본 연구에서는 현재까지 국내에서 기계식 장전장비를 활용한 벌크에멀젼 폭약을 적용하여 시공한 사례 중 굴진효율 및 여굴량이 양호한 발파결과를 근거로 암반등급별 최적 비장약량과 영역별 적정 장약량을 검토하였다. 또한, 조건을 만족하는 발파결과를 분석하여 RMR 암반분류와 벌크에멀젼 폭약의 최적 비장약량과의 상관식 $({\Upsilon}= 0.669 + (0.0154{\times}RMR),\;r=0.81)$을 얻었고, 영역별로 천공장 변화에 따른 적정 장약량 범위를 산출하였다.

• KSBB Journal
• /
• 제24권5호
• /
• pp.477-482
• /
• 2009

본 연구는 포도가공부산물로부터 유용성분을 추출하여 자원의 활용과 환경오염을 줄이고, 공정을 간결하게 하여 실제산업현장에서 이용할 수 있는 공정의 개발을 목적으로 하였다. 포도가공 부산물을 포도과피와 포도씨로 나누어 과피에서는 anthocyanin을 씨에서는 oligomeric proanthocyanidin (OPC)를 주 대상물질로 하여 추출하기 위한 공정을 개발하였다. 추출된 항산화물질은 HPLC를 이용하여 정량하였으며, 이들의 효능은 DPPH법, SOD법을 이용하여 대조군들과의 비교를 통하여 확인하였다. 두 방법 모두 포도씨 추출물의 효능이 포도과피 추출물보다 뛰어난 항산화도를 보였다. 이렇게 생산된 추출물을 이용하여 multiple lamella emulsion의 화장품 제형을 개발하였고 이 제형의 안전성과 안정성을 실험적으로 확인하였다.

• 화약ㆍ발파
• /
• 제24권2호
• /
• pp.65-73
• /
• 2006

일반 에멀젼폭약과 정밀폭약 및 미진동 Kinecker를 시험 발파하여 각각의 진동 특성을 분석하였다. 시험발파 대상 지역은 안산암이 주종을 이루며, 안산암의 일축압축강도는 $1,260kg/cm^2$로 나타났다. 각 발파패턴별로 시험 발파하여 측정한 진동 자료를 회귀 분석하여 환산거리별 진동속도를 비교한 결과 미진동 Kinecker 발파공법이 정밀진동제어발파보다 평균 30.71%, 진동제어중규모발파보다는 평균 50.94%정도의 진동이 낮게 전파됨을 볼 수 있었다.