• 제목/요약/키워드: Empirical power

검색결과 945건 처리시간 0.026초

발전소 환경소음 예측 (Environmental Noise Prediction of Power Plants)

  • 조대승;유병호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
    • /
    • pp.452-459
    • /
    • 1997
  • For computer aided design and construction of low noisy power plants, indoor and outdoor noise prediction program has been developed. The program utilizes the predefined data of noise sources and building materials and has the faculty to estimate the source level using the empirical formula in case of the measured data not being available. In the noise prediction, the mutual noise propagation between indoor and outdoor sites are considered. The outdoor noise source in the calculation of geometric divergence effects is modelled as the omni-directional finite line or planar source according to the source geometry and the receiving points. Outdoor noise prediction is carried out to consider the diffraction effect due to plant structures as well as the attenuation effect due to atmospheric absorption and soft ground. The results of indoor and outdoor noise prediction for a recently constructed diesel engine power plant show good agreement with the measured.

  • PDF

발전소 순환수계통 수직펌프의 진동저감에 관한 연구 (Vibration Reduction of Vertical Pumps Used in the Power Plant Circulating Water System)

  • 박혁;유호선
    • 플랜트 저널
    • /
    • 제9권1호
    • /
    • pp.43-49
    • /
    • 2013
  • 본 연구에서는 국내 P복합발전소에서 실제 운전 중인 순환수계통 수직펌프를 대상으로 고유진동수를 측정하고, 유체와 구조가 연성된 경우의 진동이론으로부터 고진동의 원인을 파악하였다. 현장 상황에 가장 적합하며 경제적인 공진방지 대책을 선정하여 수치해석을 통해 실효성을 미리 확인한 후 실제 시스템에 적용하는 실증시험을 실시하였다.

  • PDF

EFFICIENT THERMAL MODELING IN DEVELOPMENT OF A SPACEBORNE ELECTRONIC EQUIPMENT

  • Kim Jung-Hoon;Koo Ja-Chun
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2004년도 한국우주과학회보 제13권2호
    • /
    • pp.270-273
    • /
    • 2004
  • The initial thermal analysis needs to be fast and efficient to reduce the feedback time for the optimal electronic equipment designing. In this study, a thermal model is developed by using power consumption measurement values of each functional breadboard, that is, semi-empirical power dissipation method. In modeling heat dissipated EEE parts, power dissipation is imposed evenly on the EEE part footprint area which is projected to the printed circuit board, and is called surface heat model. The application of these methods is performed in the development of a command and telemetry unit (CTU) for a geostationary satellite. Finally, the thermal cycling test is performed to verify the applied thermal analysis methods.

  • PDF

Forecasting the Volatility of KOSPI 200 Using Data Mining

  • Kim, Keon-Kyun;Cho, Mee-Hye;Park, Eun-Sik
    • Journal of the Korean Data and Information Science Society
    • /
    • 제19권4호
    • /
    • pp.1305-1325
    • /
    • 2008
  • As index option markets grow recently, many analysts and investors become interested in forecasting the volatility of KOSPI 200 Index to achieve portfolio's goal from the point of financial risk management and asset evaluation. To serve this purpose, we introduce NN and SVM integrated with other financial series models such as GARCH, EGARCH, and EWMA. Moreover, according to the empirical test, Integrating NN with GARCH or EWMA models improves prediction power in terms of the precision and the direction of the volatility of KOSPI 200 index. However, integrating SVM with financial series models doesn't improve greatly the prediction power. In summary, SVM-EGARCH was the best in terms of predicting the direction of the volatility and NN-GARCH was the best in terms of the prediction precision. We conclude with advantages of the integration process and the need for integrating models to enhance the prediction power.

  • PDF

PSPICE Modeling of Commercial ICs for Switch-Mode Power Supply (SMPS) Design and Simulation

  • Yi, Yun-Jae;Yu, Yun-Seop
    • Journal of information and communication convergence engineering
    • /
    • 제9권1호
    • /
    • pp.74-77
    • /
    • 2011
  • PSPICE modeling of a commercial LED driver IC (TOP245P) and PC817A optocoupler is proposed for the switch-mode power supply (SMPS) (applicable to LED driver) design and simulation. An analog behavioral model of the TOP245P IC including the shunt regulator, under-voltage(UV) detection, over-voltage(OV) shut-down and SR flip-flop is developed by using PSPICE. The empirical equation of PC817A current transfer ratio (CTR) is fitted from the datasheet of PC817A. Two types of SMPSs are simulated with the averaged-model and switching-model. The simulation results by the proposed PSPICE models are in good agreement with those in the data sheet and an experimental data.

음향파워 평형방법을 이용한 HVAC 시스템 소음예측 (Prediction of HVAC System Noise by Acoustic Power Balancing Method)

  • 홍진무;최태묵;김병희;조대승;김동해
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.1306-1312
    • /
    • 2001
  • In this study. the acoustic power balancing method to analysis HVAC system noise is presented. The method can consider not only forward but also backward propagations of noise generated by the operation of air supply units and aerodynamical disturbance at duct elements. This can be done by estimating sound transmission and reflection properties of duct elements. and balancing acoustic powers of total HVAC system. To verify the accuracy of the presented method. numerical analysis for a HVAC system is carried out and the results are compared with those obtained by a traditional empirical method. suggested by National Environmental Balancing Bureau.

  • PDF

수조식 양식장의 태양광발전시스템 리모델링 교체 효과: 시뮬레이션을 통한 에너지절감효과 분석 (The Effect of Remodeling Replacement of Photovoltaic Power Generation System in Fish Farm : Analysis of Energy Saving Effect through Simulation)

  • 최현석;나종혁;이현영;노재엽
    • Current Photovoltaic Research
    • /
    • 제9권1호
    • /
    • pp.11-16
    • /
    • 2021
  • In the past, marine pollution caused by radioactivity and wastewater discharge caused mass destruction. As an alternative, the land farming system became common and operational. In recent years, safety and environmental problems caused by declining population due to aging of fishermen and underdeveloped facilities have always been lurking, so improvement is urgently needed. As part of the new renewable energy 3020 plan announced by the government in 2017, a new model was proposed to improve the environment as well as save energy when the roof of a water tank farm was remodeled into a solar power system. Study, when the existing roof was remodeled and replaced with a water tank farm in Busan as an empirical model, the energy saving rate was analyzed by comparing the actual electricity consumption and power generation.

차량용 PEMFC 동적 모델을 이용한 시스템 부하 응답 특성 (System Response of Automotive PEMFC with Dynamic Modeling under Load Change)

  • 한재영;김성수;유상석
    • 한국자동차공학회논문집
    • /
    • 제21권1호
    • /
    • pp.43-50
    • /
    • 2013
  • The stringent emission regulation and future shortage of fossil fuel motivate the research of alternative powertrain. In this study, a system of proton exchange membrane fuel cell has been modeled to analyze the performance of the fuel cell system for automotive application. The model is composed of the fuel cell stack, air compressor, humidifier, and intercooler, and hydrogen supply which are implemented by using the Matlab/Simulink(R). Fuel cell stack model is empirical model but the water transport model is included so that the system performance can be predicted over various humidity conditions. On the other hand, the model of air compressor is composed of motor, static air compressor, and some manifolds so that the motor dynamics and manifold dynamics can be investigated. Since the model is concentrated on the strategic operation of compressor to reduce the power consumption, other balance of components (BOP) are modeled to be static components. Since the air compressor model is empirical model which is based on curve fitting of experiments, the stack model is validated with the commercial software and the experiments. The dynamics of air compressor is investigated over unit change of system load. The results shows that the power consumption of air compressor is about 12% to 25% of stack gross power and dynamic response should be reduced to optimize the system operation.

3변수 Weibull 분포형의 형상매개변수 및 극치값 가중치를 고려한 EDF 검정에 대한 연구 (A Study on Empirical Distribution Function with Unknown Shape Parameter and Extreme Value Weight for Three Parameter Weibull Distribution)

  • 김태림;신홍준;허준행
    • 한국수자원학회논문집
    • /
    • 제46권6호
    • /
    • pp.643-653
    • /
    • 2013
  • 적절한 확률분포형을 결정하고 그에 따른 확률수문량을 산정하는 것은 빈도해석에서 가장 중요한 절차이며, 이를 수행하기 위해서는 경험적 확률분포에서 얻어지는 자료와 가정한 확률분포에서 얻어지는 자료의 일치 정도를 판별하는 적합도 검정을 거쳐야 한다. 지금까지 일반적으로 적용된 적합도 검정 방법은 분포형의 전체적인 적합정도를 판별하여 최근의 기상이변으로 인한 극치 사상에 대하여는 충분히 고려하지 못하고 있다. 따라서 본 연구에서는 분포형의 극치 사상에 가중치를 주는 modified Anderson-Darling(AD) 검정 방법을 3변수 Weibull 분포형에 적용하여 검정통계량 한계값과 기각력을 살펴보았으며 이를 실제자료에 적용한 결과, modified AD 검정 방법이 다른 기존의 적합도 검정보다 더 우수한 기각력을 가지고 있음을 확인하였다. 이는 앞으로 3변수 Weibull 분포형을 이용한 극치 수문량 선정에 있어 modified AD 방법이 하나의 기준으로 작용할 수 있을 것이라 판단된다.

국력요소 중, 소프트파워로서의 문화경쟁력 비교분석 연구 (A Comparative analysis of cultural power as a soft power among national power)

  • 최창현;박정배;김종근
    • 디지털융복합연구
    • /
    • 제12권6호
    • /
    • pp.55-68
    • /
    • 2014
  • 본 연구에서는 문화력이 국력요소인 소프트파워에 어떤 영향을 미치고 있는지를 경험적 연구를 통해 살펴보았다. 문화력을 발휘하기 위해서는 문화적 국력요소에 대한 적절한 수준의 자원을 가지고 있어야 하고, 이의 활용을 통해 자원이 필요할 때 필요한 질과 양만큼 개발 생산하여 확보할 수 있는 역량을 갖추고 있어야 하며, 그런 자원들을 개발 생산, 확보하는 제반주체들의 활동이 원활히 발휘되도록 돕는 제반지원능력, 즉 복합지원역량으로 나타나야 한다. 문화력의 지표는 국민호감도, 문화호감도, 문화산업 경쟁력 지수, 체육경쟁력 지수, 관광 경쟁력 지수 등을 포함한다. 각 국가들의 문화력을 분석한 결과, 각 국가들의 문화산업 경쟁력과 여행 및 관광 경쟁력의 요소들이 비교적 높은 상관관계를 나타내었다. 따라서 본 연구에서는 '소프트파워로서의 문화력' 부문에서 한국 중국 미국 간 문화산업과 여행 및 관광 경쟁력 측면에서 요소 지표를 분석하여보고 문화차이 등 자원의 발휘를 고찰하였다.