• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.249-261
• /
• 2022

This paper presents a numerical study to develop a guideline for estimating the plastic strength of elliptical steel slit damper with reasonable accuracy. The strut width increases from middle to end in elliptical steel slit damper and it is observed from the past studies that variation of the width is not considered for calculating the plastic strength of the damper. It is also noticed that the existing formulas for predicting plastic strength of this kind of damper may not be accurate and further refinement is warranted. Study is then carried on elliptical steel slit damper made of mild steel and having different geometry to find out equivalency of it with oblong steel slit damper having similar plastic strength. A few three-dimensional finite element models of seismic moment connection system with steel slit damper are developed and validated against past experiments for carrying the present study considering both the material nonlinearity as well as geometric nonlinearity. The results of the parametric studies have been compared with energy quantities and presented graphically to better understand the effects of different parameters on the system. Based on the pattern of parametric study results, closed-form semi-empirical algebraic expression of damper plastic strength is developed for elliptical steel slit damper which shows very good agreement with finite element analysis as well as experiments. This developed expression can now be used for elliptical steel slit damper in replacement with any type of damper in the design of moment connection.

• Wind and Structures
• /
• 제38권4호
• /
• pp.309-323
• /
• 2024

The gust factor and turbulence intensity are two crucial parameters that characterize the properties of turbulence. In tropical cyclones (TCs), these parameters exhibit significant variability, yet there is a lack of established formulas to account for their probabilistic characteristics with consideration of their inherent connection. On this condition, a probabilistic analysis of gust factors and turbulence intensities of TCs is conducted based on fourteen sets of wind data collected at the Sutong Cable-stayed Bridge site. Initially, the turbulence intensities and gust factors of recorded data are computed, followed by an analysis of their probability densities across different ranges categorized by mean wind speed. The Gaussian, lognormal, and generalized extreme value (GEV) distributions are employed to fit the measured probability densities, with subsequent evaluation of their effectiveness. The Gumbel distribution, which is a specific instance of the GEV distribution, has been identified as an optimal choice for probabilistic characterizations of turbulence intensity and gust factor in TCs. The corresponding empirical models are then established through curve fitting. By utilizing the Gumbel distribution as a template, the nexus between the probability density functions of turbulence intensity and gust factor is built, leading to the development of a generalized probabilistic model that statistically describe turbulence intensity and gust factor in TCs. Finally, these empirical models are validated using measured data and compared with suggestions recommended by specifications.

• 한국농공학회지
• /
• 제27권2호
• /
• pp.23-37
• /
• 1985

This studies were carried out to get characteristics of frequency distribution, probable flood flows according to the return periods, and the correlation between return periods and those length of records affect the Risk of failure in the annual maximum series of the main river systems in Korea. Especially, Risk analysis according to the levels were emphasized in relation to the design frequency factors for the different watersheds. Twelve watersheds along Han, Geum, Nak Dong, Yeong San and Seom Jin river basin were selected as studying basins. The results were analyzed and summarized as follows. 1. Type 1 extremal distribution was newly confirmed as a good fitted distribution at selected watersheds along Geum and Yeong San river basin. Three parameter lognormal Seom Jin river basin. Consequently, characteristics of frequency distribution for the extreme value series could be changed in connection with the watershed location even the same river system judging from the results so far obtained by author. 2. Evaluation of parameters for Type 1 extremal and three parameter lognormal distribution based on the method of moment by using an electronic computer. 3. Formulas for the probable flood flows were derived for the three parameter lognormal and Type 1 extremal distribution. 4. Equations for the risk to failure could be simplified as $\frac{n}{N+n}$ and $\frac{n}{T}$ under the condition of non-parametric method and the longer return period than the life of project, respectively. 5. Formulas for the return periods in relation to frequency factors were derived by the least square method for the three parameter lognormal and Type 1 extremal distribution. 6. The more the length of records, the lesser the risk of failure, and it was appeared that the risk of failure was increasing in propotion to the length of return periods even same length of records. 7. Empirical formulas for design frequency factors were derived from under the condition of the return periods identify with the life of Hydraulic structure in relation to the risk level. 8. Design frequency factor was appeared to be increased in propotion to the return periods while it is in inverse proportion to the levels of the risk of failure. 9. Derivation of design flood including the risk of failure could be accomplished by using of emprical formulas for the design frequency factor for each watershed.

• 한국문헌정보학회지
• /
• 제8권
• /
• pp.183-207
• /
• 1981

Library standards have been the source of considerable controversy, whereas many problems are involved in developing stardard for university library collections. For evaluation purposes, standards should be precise, quantifiable and measurable. In the United States, however, standards for academic libraries are limited to qualitative statements and principles. Quantitative standards, when given, are ususally related to the number of population in the institution being served, or the prescribed quantitative objectives are often arbitrarily formulated by value judgements. The study in this paper attempts to explain the problems involved in developing quantitative standard for academic library collections. Two problems facing in the formulation of the optimal size of collection are identified. One is the theoretically faulty concept of adequacy of collection to meet the situations of diversity of university libraies, and the other is the difficulties in quantification and measurement, along with the lack of concept of adequacy of collection. However, quantification of adequate size of collection is proved to be useful on the pratical level, even though not valid theoretically. ACRL, Clapp/Jordan and Voigt developed formulas or models for setting the optimal size of a library collection for any particular university library. The main purpose of this study is the analysis of the above formulas. ACRL standard was drawn from obervation and analysis of statistcs in leading library collections. In academic field, this judgement appears to have been based on the assumption that a high-grade institution would be apt to have a good library collection. This study criticizes ACRL standard for its failure to include some determinants of measurements, and points out the limitations of the standard. In contrast. Clapp/Jordan developed a formula rather scientifically based upon bibliographical sources. This is similarly empirical but has the advantage of bringing into play the elements which make universities diverse in nature. Both ACRL and Clapp/Jordan formulas share two major defects. (1) the specific subject needs of the collection are not indiacted directly, and (2) percentage rate of growth is an indicator in measuring the potential utility of a collection. Thus both formulas failed to provide a basis for meaningful evaluation. Voigt further developed a model for determining acquisition rates for currently published materials based on bibliographic technique. Voigt model encourages experimentation with different programs and different allocations of input resources, designed to meet the needs of the library's particular population. Standard for university library collections can be formulated in terms of input(traditional indicator), or additionally, in terms of output(cost-effectiveness). Cost effectiveness is expressed as user satisfaction, ability to provide wanted materials within a reasonable time period. Thus simple quantitative method does not cover all the situations of diversity of university library collections, nor measures the effectiveness of collections. Valid standard could not be established without further research.

• 한국방재학회 논문집
• /
• 제9권5호
• /
• pp.125-130
• /
• 2009

한강의 홍수예경보에 자주 사용되고 있는 저류함수법은 강우-유출관계의 비선형성을 고려한 적용성이 뛰어난 모형이지만, 우리나라의 지형특성을 고려한 매개변수 산정식이 존재하지 않아 실무에서 유역별, 사상별 매개변수 추정에 많은 노력과 시간을 투자하고 있는 실정이다. 그러므로 본 연구에서는 다중회귀분석을 이용하여 한강유역의 저류함수법 매개변수를 계산하기 위한 공식을 유도하여 저류함수법의 적용성을 높이고자 하였다. 상관분석을 통하여 다중회귀분석의 독립변수로는 유역의 유역면적, 하천경사, 유로연장이 사용되도록 결정되었으며, 다중공선성을 가지고 있는 독립변수들을 제거하고, 독립변수의 수를 달리하면서 한강유역 내 30개 소유역에 대해 일반화된 매개변수 산정식을 유도하였다. 제안된 회귀식은 모형의 개발에 사용되지 않은 한강유역 내 다른 지점인 문막수위표의 강우에 적용하여 그 적용성을 검증하였다. 제안된 회귀식을 한강공식이라고 명하고, 이는 한강유역 내에 홍수예경보나 유출계산에 저류함수법 적용 시 유용한 자료로 활용하고자 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1633-1638
• /
• 1991

A CAI system is developed to support the Instruction of an aircraft conceptual design for aeronautical engineering students. Three system concepts are proposed and an Object-Oriented approach is applied to construct the system. The system has three major functions to perform a conceptual design: (1) the system stores modular data and empirical formulas used for a wide range of aircraft design tasks from light aircraft to long range airliners. (2) Implementation of modules by message passing makes it easy to realize the various design tasks required for different design requirements. (3) The system allows users to study trade-off among the requirements. The system has a graphical user Interface which allows users to communicate with the system interactively. The effectiveness of the system Is demonstrated through some case studies.

• 한국해양공학회지
• /
• 제32권2호
• /
• pp.123-130
• /
• 2018

The present study investigated the validity of an equilibrium shoreline empirical formula for real phenomena. Among three types of equilibrium shoreline formulas, Hsu's parabolic type static formula was employed, which is well-known and the most practical for shoreline estimation after coastal or harbor structure construction. The wave data observed at Maengbang beach and the CERC formula on longshore sediment transport were used in the present investigation. A comparison study was only conducted for the case of a shoreline change after the construction of a groyne. Reasonable agreement was seen between the observed wave data and the data obtained under a wave angle spreading function S = 3.5. However, significant changes were observed when S increased. Thus, careful application is required when using Hsu's formula.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.160-167
• /
• 2018

The purpose of this study is to develop a process for forming a MPa ultra-high strength steel sheet to reduce weight and improve product strength. To do this, we performed the initial process design based on empirical formulas in a handbook and experience of skilled engineers, and researched the effects of major process variables on spring back by analyzing the forming analysis and experimental results. This paper suggests an optimal process design of the seat rail lower parts, using a MPa ultra-high strength steel sheet. This satisfies the dimensional accuracy and strength requirements for the product.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1490-1493
• /
• 2007

Aerodynamic noise generated from wind turbines is predicted by it's classified source mechanisms using computational method. BPF noise according to the blade passing motion, is modelled on monopole and dipole sources. They are predicted by Farassat 1A equation. Airfoil self noise and turbulence ingestion noise are modelled upon quadrupole sources and are predicted by semi-empirical formulas composed on the groundwork of Brooks et al. and Lowson. Retarded time is considered, not only in low frequency noise prediction but also in turbulence ingestion noise and airfoil self noise prediction. Wind turbine noise emission of a 3MW wind turbine and a 600 kW wind turbine, standing for large and middle sized wind turbines, is analyzed.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.40-45
• /
• 2010

In order to establish the electric distribution system economically and operate efficiently, it becomes important to calculate energy losses of the system more accurately. This importance is not only related for the engineering of utilities' power network but also for the consumers' electric system. The Distribution Loss Factor (DLF) is the fundamental element of calculating the energy losses occurred through the electric system including the electric lines and equipments. Up to now, the DLF is calculated by empirical formulas using the correlation between the DLF itself and Load Factor. However, these methods have some limitations to reflect the various characteristics of the system and the load. In this regard, the novel method proposed here is developed to yield more accurate result of DLF which actively interacting with the characteristics and load patterns of the system. The improvement of accuracy is very significant according to the results of verification presented at the end of this paper.