• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.277-277
• /
• 2010

The capacity of the carbonaceous materials reached ca. $350\;mAhg^{-1}$ which is close to theorestical value of the carbon intercalation composition $LiC_6$, resulting in a relatively low volumetric Li capacity. Notwithstanding the capacities of carbon, it will not adjust well to the need so future devices. Silicon shows the highest gravimetric capacities (up to $4000\;mAhg^{-1}$ for $Li_{21}Si_5$). Although Si is the most promising of the next generation anodes, it undergoes a large volume change during lithium insertion and extraction. It results in pulverization of the Si and loss of electrical contact between the Si and the current collector during the lithiation and delithiation. Thus, its capacity fades rapidly during cycling. We focused on electrode materials in the multiphase form which were composed of two metal compounds to reduce the volume change in material design. A combination of electrochemically amorphous active material in an inert matrix (Si-M) has been investigated for use as negative electrode materials in lithium ion batteries. The matrix composited of Si-M alloys system that; active material (Si)-inactive material (M) with Li; M is a transition metal that does not alloy with Li with Li such as Ti, V or Mo. We fabricated and tested a broad range of Si-M compositions. The electrodes were sputter-deposited on rough Cu foil. Electrochemical, structural, and compositional characterization was performed using various techniques. The structure of Si-M alloys was investigated using X-ray Diffractometer (XRD) and transmission electron microscopy (TEM). Surface morphologies of the electrodes are observed using a field emission scanning electron microscopy (FESEM). The electrochemical properties of the electrodes are studied using the cycling test and electrochemical impedance spectroscopy (EIS). It is found that the capacity is strongly dependent on Si content and cycle retention is also changed according to M contents. It may be beneficial to find materials with high capacity, low irreversible capacity and that do not pulverize, and that combine Si-M to improve capacity retention.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.203-203
• /
• 2016

The linkage between climate change and water security, i.e., the response of water resource to the future climate change, have been of great concern to both scientific community and policy makers. In this study, the impact of future climate on water resources in Yellow River Basin in North of China has been investigated using the Coupled Land surface and Hydrology Model System (CLHMS) and IPCC AR5 projected future climate change in the basin. Firstly, the performances of 14 IPCC AR5 models in reproducing the observed precipitation and temperature in China, especially in North of China, have been evaluated, and it's suggested most climate models do show systematic bias compared with the observation, however, CNRM-CM5、HadCM5 and IPSL-CM5 model are generally the best models among those 14 models. Taking the daily projection results from the CNRM-CM5, along with the bias-correction technique, the response of water resources in Yellow river basin to the future climate change in different emission scenarios have been investigated. All the simulation results indicate a reduction in water resources. The current situation of water shortage since 1980s will keep continue, the water resources reduction varies between 28 and 23% for RCP 2.6 and 4.5 scenarios. RCP 8.5 scenario simulation shows a decrease of water resources in the early and mid 21th century, but after 2080, with the increase of rainfall, the extreme flood events tends to increase.

• Current Optics and Photonics
• /
• 제2권5호
• /
• pp.474-481
• /
• 2018

We propose a polarization phase-shifting technique to investigate the thickness of $Ta_2O_5$ thin films deposited on BK7 substrates, using a modified Sagnac interferometer. Incident light is split by a polarizing beam splitter into two orthogonal linearly polarized beams traveling in opposite directions, and a quarter-wave plate is inserted into the common path to create an unbalanced phase condition. The linearly polarized light beams are transformed into two circularly polarized beams by transmission through a quarter-wave plate placed at the output of the interferometer. The proposed setup, therefore, yields rotating polarized light that can be used to extract a relative phase via the self-reference system. A thin-film sample inserted into the cyclic path modifies the output signal, in terms of the phase retardation. This technique utilizes three phase-shifted intensities to evaluate the phase retardation via simple signal processing, without manual adjustment of the output polarizer, which subsequently allows the thin film's thickness to be determined. Experimental results show that the thicknesses obtained from the proposed setup are in good agreement with those acquired by a field-emission scanning electron microscope and a spectroscopic ellipsometer. Thus, the proposed interferometric arrangement can be utilized reliably for non-contact thickness measurements of transparent thin films and characterization of optical devices.

• Animal Bioscience
• /
• 제34권6호
• /
• pp.1022-1028
• /
• 2021

Objective: Supplemental nitrate is known to be an effective tool to mitigate methane emission by ruminants. Based on theoretical considerations, supplemental nitrate can improve but also deteriorate the growth performance. The overall effect of supplemental nitrate on growth performance, however, is not yet known. The objective of the current study was therefore to evaluate the effect of a higher dose of NO3- on overall growth performance when feeding either Pangola grass hay or rice straw. Methods: Thirty-two crossbred, 3-month-old Thai native×Anglo-Nubian crossbred male goats were used. The experiment had a 2×2 factorial design with an experimental period of 60 days. Eight goats were randomly allocated to each dietary treatment, i.e. a ration containing either Pangola hay (Digitaria eriantha Steud) or rice straw (Oryza Sativa) as a source of roughage, supplemented with a concentrate containing either 3.2% or 4.8% potassium nitrate. The rations were formulated to be isonitrogenous. The animals were weighed at the start of the experiment and at days 30 and 60. Feces were collected during the last five days of each 30-day period. Results: High-nitrate increased overall DM intake by approximately 3%, irrespective the source of roughage, but only the goats fed a rice straw-based ration responded with an increase in body weight (BW). Thus, the overall feed conversion ratio (kg feed/kg BW gain) was influenced by roughage source ×nitrate and decreased by almost 60% when the goats were fed rice straw in combination with a high versus a low dietary nitrate content. The digestibility of macronutrients was only affected by the source of roughage and the digestibility of organic matter, crude protein, and neutral detergent fibre was greater when the goats were fed Pangola hay. Conclusion: It was concluded that the replacement of soybean meal by nitrate improves the growth performance of meat goats fed rations based on rice straw, but not Pangola hay.

• ETRI Journal
• /
• 제43권6호
• /
• pp.1093-1102
• /
• 2021

Microdisplays based on organic light-emitting diodes (OLEDs) have a small form factor, and this can be a great advantage when applied to augmented reality and virtual reality devices. In addition, a high-resolution microdisplay of 3000 ppi or more can be achieved when applying a white OLED structure and a color filter. However, low luminance is the weakness of an OLED-based microdisplay as compared with other microdisplay technologies. By applying a tandem structure consisting of two separate emission layers, the efficiency of the OLED device is increased, and higher luminance can be achieved. The efficiency and white spectrum of the OLED device are affected by the position of the emitting layer in the tandem structure and calculated via optical simulation. Each white OLED device with optimized efficiency is fabricated according to the position of the emitting layer, and red, green, and blue spectrum and efficiency are confirmed after passing through color filters. The optimized white OLED device with color filters reaches 97.8% of the National Television Standards Committee standard.

• 한국항해항만학회지
• /
• 제45권3호
• /
• pp.87-94
• /
• 2021

국제해사기구의 연료유 황 함유량 제한 등, 세계적으로 강화되고 있는 환경규제로 LNG를 선박 연료로 사용하는 연구 및 사업이 활발히 진행되고 있다. 본 연구에서는 기본설계 되어 있는 부유식 벙커링 터미널(FLBT, Floating LNG bunkering terminal)을 대상으로, STS LNG 하역 작업을 위해 접안 하는 과정을 수치 시뮬레이션으로 평가하였다. 수치해석에서는 예인선이 대상선박을 밀 경우 이를 가상의 펜더로 가정하였으며, 당길 때는 HMPE 로프 특성을 적용하였다. 해석에는 파랑, 조류, 바람 1년 재현 확률의 해상조건을 적용하였다. 수치모델은 선행 모형시험 결과로부터 조정되어 정확한 결과를 얻을 수 있도록 하였다. 해석 결과 LNG선은 대부분의 1년 환경조건에서 안전한 접안이 가능하였다. 파랑 방향에 따라 안정성의 차이가 큼으로 FLBT의 Heading control 기능을 적용하여 횡파를 피한다면 더욱 안정적인 운용이 가능할 것이다.

• Advances in materials Research
• /
• 제8권1호
• /
• pp.47-73
• /
• 2019

Joining of Mg/Ti hybrid structures by welding for automotive and aerospace applications has attracted great attention in recent years due mainly to its potential benefit of energy saving and emission reduction. However, joining them has been hampered with many difficulties due to their physical and metallurgical incompatibilities. Different joining processes have been employed to join Mg/Ti, and in most cases in order to get a metallurgical bonding between them was the use of an intermediate element at the interface or mutual diffusion of alloying elements from the base materials. The formation of a reaction product (in the form of solid solution or intermetallic compound) along the interface between the Mg and Ti is responsible for formation of a metallurgical bond. However, the interfacial bonding achieved and the joints performance depend significantly on the newly formed reaction product(s). Thus, a thorough understanding of the interaction between the selected intermediate elements with the base metals along with the influence of the associated welding parameters are essential. This review is timely as it presents on the current paradigm and progress in welding and joining of Mg/Ti alloys. The factors governing the welding of several important techniques are deliberated along with their joining mechanisms. Some opportunities to improve the welding of Mg/Ti for different welding techniques are also identified.

• 공업화학
• /
• 제31권6호
• /
• pp.585-590
• /
• 2020

암(예: 폐암, 전립선암, 간암, 부신겉질샘암종 등)의 조기 진단은 치료비용, 생존율, 완치 여부를 결정짓는 아주 중요한 단계다. 현재의 암 진단 시스템(예: 조직검사, 컴퓨터단층쵤영, 양전자방출단층쵤영, 자기공명영상, 초음파촬영 등)은 고가의 장비를 사용하거나 훈련된 고급 인력만이 수행 가능하기 때문에 신속한 조기 진단에 적합하지 못하다. 국제 의과학 사회는 현장검사(point of care) 디바이스 개발을 통한 효과적인 질병 관리 시스템 개발을 지향하고 있으며, 다양한 분석법 기반의 디바이스가 개발되어왔다. 이 중에서도 측면 흐름 면역 크로마토그래피 분석법 스트립은 경제적인 비용, 짧은 검사 시간, 사용자의 쉬운 접근성 등의 많은 이점들이 있다. 본 논문에서는 LFIA 스트립의 최신 연구 동향을 바탕으로 암 진단 관점에서의 비색법 기반 LFIA 스트립의 연구 방향 및 잠재적 응용에 대해 논의하고자 한다.

• 대한건축학회논문집:계획계
• /
• 제34권2호
• /
• pp.41-48
• /
• 2018

This study is expected to provide some basic data on how to apply more economical and efficient eco-friendly factors to reduce the carbon emissions. It has been scrutinized and analyzed the environmental factors of passive eco-friendly elements along with active eco-friendly elements as more efficient factors for energy conservation based on the case of a newly constructed broadcasting building with the green building certification in Sangam-dong DMC area. The first analysis was the energy consumption trends in Korea and the necessity of energy saving. Secondly, it was examined the energy consumption in the current status of the broadcasting building. Thirdly, it was looked into the correlation between the eco-friendly design application factors applied to the broadcasting building and the energy consumption types. As a result of the analysis, the application of fan and feed pump inverter along with ventilation system of waste heat recovery ventilation system were more meaningful in accordance with the economic feasibility of broadcasting buildings rather than economical effect of passive elements such as rooftop garden, reinforcement of building insulation. Also, the application of lighting control had the economical feasibility. Therefore, when it is intended to change the green building certification energy related evaluation items of the similar broadcasting building types, it is necessary to change the direction of adding weight to the more economical active element items in the future.

• 한국방사선학회논문지
• /
• 제15권4호
• /
• pp.415-427
• /
• 2021

한국원자력의학원에서는 50 MeV 사이클로트론의 빔 라인을 이용하여 연구자들에게 다양한 빔 조사 서비스를 수행하고 있다. 특히 중성자 빔 서비스는 양성자와 베릴륨의 핵반응을 이용하기 때문에 높은 전류를 사용하므로 조사 시료의 방사화 가능성이 높아진다. 본 연구에서는 연구자들이 선호하는 35 MeV 20 ㎂ 중성자 빔 서비스에 의해 발생 가능한 방사화에 대해 MCNP 6.2와 FISPACT-II 4.0을 이용해 평가했다. 평가결과 철, 구리, 텅스텐 시료는 1시간 이상 조사하는 경우 장반감기 핵종이 생성되는 방사화가 발생하여 자체처분농도를 초과했다. 매일 2시간 사용 조건에서 건축물에 대한 방사화는 발생하지 않았고 조사실 내부 공기의 방사화로 인한 종사자의 내부피폭은 매우 미비했고, 이 공기를 배기하는 경우 배출기준도 만족했다.