• Journal of Microbiology and Biotechnology
• /
• 제27권11호
• /
• pp.2037-2043
• /
• 2017

The surface protein hemagglutinin (HA) mediates the attachment of influenza virus to host cells containing sialic acid and thus facilitates viral infection. Therefore, HA is considered as a good target for the development of diagnostic tools for influenza virus. Previously, we reported the isolation of single-stranded aptamers that can distinguish influenza subtype H1 from H5. In this study, we describe a method for the selective electrical detection of H1 using the isolated aptamer as a molecular probe. After immobilization of the aptamer on Si wafer, enzyme-linked immunosorbent assay (ELISA) and field emission scanning electron microscopy (FE-SEM) showed that the immobilized aptamer bound specifically to the H1 subtype but not to the H5 subtype. Assessment by cyclic voltammetry (CV) also demonstrated that the immobilized aptamer on the indium thin oxide-coated surface was specifically bound to the H1 subtype only, which was consistent with the ELISA and FE-SEM results. Further measurement of CV using various amounts of H1 subtype provided the detection limit of the immobilized aptamer, which showed that a nanomolar scale of target protein was sufficient to produce the signal. These results indicated that the selected aptamer can be an effective probe for distinguishing the subtypes of influenza viruses by monitoring current changes.

• 대한환경공학회지
• /
• 제36권11호
• /
• pp.791-802
• /
• 2014

에너지 소비량은 지속적으로 증가하고 있는 반면 사용가능한 부존자원은 한정되어 있어 전 세계적으로 에너지 위기가 심화되고 있다. 화석연료 고갈 및 에너지 생산으로 인한 환경오염 문제를 해소하기 위하여 새로운 방식의 에너지 생산 기술 개발이 요구되고 있으며, 소수력, 지열, 태양열 광, 풍력, 바이오매스 등의 신재생 에너지기술이 이미 개발되었거나 활발히 연구되고 있다. 최근 지구상에 풍부하게 존재하는 해수와 담수를 이용하여 에너지를 생산하는 염도차 발전이 관심을 얻고 있으며, 그 중에 대표적인 공정이 압력지연삼투(Pressure retarded osmosis, PRO)이다. 압력지연삼투는 에너지 생산 시 이산화탄소 배출이 없고 외부 환경요인으로 인한 제약이 적다는 장점이 있으나, 전용막 및 최적화 기술의 부재로 인해 아직 상용화 단계에 이르지 못 하였다. 따라서 본 논문에서는 압력지연삼투 기술의 현황과 한계를 다양한 측면에서 분석해보고, 이를 통해 압력지연삼투의 기술 개발 방향에 대해 논의해보고자 한다.

• 한국물환경학회지
• /
• 제33권1호
• /
• pp.70-77
• /
• 2017

Total Pollution Load Control (TPLC) is a system for managing the discharge load assigned by satisfying the Target Water Quality (TWQ) in Standard Flow Conditions (SFC). TWQ for a between Metropolitan Cities/Dos Specified (Cites/Dos TWQ) is very important to be the basis of each Unit Watershed TWQ. The purpose of this study was to establish a rational and scientific 'Calculation Metohd of Cites/Dos TWQ'. A methodology for the 3rd phase 'Cites/Dos TWQ' was proposed in this study based on review of the past phase (1rd and 2rd) 'Cites/Dos TWQ' in nakdong river. And utilized water quality model to estimate 3rd phase 'Cites/Dos TWQ' The allocation method of individual discharge sources are important for estimating 'Cites/Dos TWQ' In this case, the key point of the method of calculating the total allowable individual sources is the balance of the equity and the efficiency between individual sources of reduced pollutants. Thus, water quality shall be determined with regard to the current emission levels, the reduction capacity and the technical possibilities of individual sources. We estimate 3rd phase 'Cites/Dos TWQ' according to the 'Calculation Method of Cites/Dos TWQ'.

• 상하수도학회지
• /
• 제30권4호
• /
• pp.401-408
• /
• 2016

Desalination is getting more attention as an alternative to solve a global water shortage problem in the future. Especially, a desalination technology is being expected as a new growth engine of Korea's overseas plant business besides one of the solutions of domestic water shortage problem. In the past, a thermal evaporation technology was a predominant method in desalination market, but more than 75% of the current market is hold by a membrane-based reverse osmosis technology because of its lower energy consumption rate for desalination. In the future, it is expected to have more energy efficient desalination process. Accordingly, various processes are being developed to further enhance the desalination energy efficiency. One of the promising technologies is a desalination process combined with Pressure Retarded Osmosis (PRO) process. The PRO technology is able to generate energy by using osmotic pressure of seawater or desalination brine. And the other benefits are that it has no emission of $CO_2$ and the limited impact of external environmental factors. However, it is not commercialized yet because a high-performance PRO membrane and module, and a PRO system optimization technology is not sufficiently developed. In this paper, the recent research direction and progress of the SWRO-PRO hybrid desalination was discussed regarding a PRO membrane and module, an energy recovery system, pre-treatment and system optimization technologies, and so on.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.260-260
• /
• 2011

투명 비정질 산화물반도체는 디스플레이의 구동소자인 박막 트랜지스터에 채널층으로 사용된다. 또한 투명하면서 유연성이 있는 소자를 저비용으로 제작할 수 있는 장점을 가진다. 투명 산화물반도체 재료 중 IGZO는 Si 또는 GaAs와 같은 공유결합성 반도체와는 다른 전자 배치로 전도대가 금속이온의 ns 궤도에서 형성되며, 가전도대가 산소 음이온의 2p 궤도에서 형성된다. 특히 큰 반경의 금속 양이온은 인접한 양이온과 궤도 겹침이 크게 발생하게 되며 캐리어의 효과적인 이동 경로를 제공해줌으로써 다른 비정질 반도체와는 다르게 높은 전하이동도(~10 $cm^2$/Vs)를 가진다. 따라서 저온공정에서 우수한 성능의 TFT소자를 제작할 수 있는 장점이 있다. 본 연구에서는 TFT 채널층으로 사용하기 위한 a-IGZO박막의 산소분압에 따른 특성변화를 분석 하였다. a-IGZO박막은 Pulsed Laser Deposition (PLD)를 이용하여 산소분압(20~200 mTorr) 변화에 따라 Glass기판에 증착하였다. 증착된 a-IGZO 박막의 구조적 특성으로는 X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), 광학적 특성은 UV-vis spectroscopy 분석을 통해서 알아보았다. TFT 채널층의 조건으로는 낮은 off-current, 높은 on-off ratio를 위해 고저항 ($10^3\;{\Omega}cm$)의 진성반도체 성질과 source/drain금속과의 낮은 접촉저항(ohmic contact) 등의 전기적 성질이 필요하다. 따라서 이러한 전기적 특성확인을 위해 transmission line method (TLM)을 사용하여 접촉저항과 비저항을 측정하였고, 채널층으로 적합한 분압조건을 확인해볼 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.389-389
• /
• 2012

Molybdenum is one of the most important materials used as a back ohmic contact for $Cu(In,Ga)(Se,S)_2$ (CIGS) solar cells because it has good electrical properties as an inert and mechanically durable substrate during the absorber film growth. Sputter deposition is the common deposition process for Mo thin films. Molybdenum thin films were deposited on soda lime glass (SLG) substrates using direct-current planar magnetron sputtering technique. The outdiffusion of Na from the SLG through the Mo film to the CIGS based solar cell, also plays an important role in enhancing the device electrical properties and its performance. The structure, surface morphology and electrical characteristics of Mo thin films are generally dependent on deposition parameters such as DC power, pressure, distance between target and substrate, and deposition temperature. The aim of the present study is to show the resistivity of Mo layers, their crystallinity and morphologies, which are influenced by the substrate temperature. The thickness of Mo films is measured by Tencor-P1 profiler. The crystal structures are analyzed using X-ray diffraction (XRD: X'Pert MPD PRO / Philips). The resistivity of Mo thin films was measured by Hall effect measurement system (HMS-3000/0.55T). The surface morphology and grain shape of the films were examined by field emission scanning electron microscopy (FESEM: Hitachi S-4300). The chemical composition of the films was obtained by the energy dispersive X-ray spectroscopy (EDX). Finally the optimum substrate temperature as well as deposition conditions for Mo thin films will be developed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.147-147
• /
• 2011

High crystalline nonpolar a-plane (11-20) nitride light emitting diodes (LEDs) have been fabricated on r-plane (1-102) sapphire substrates by metalorganic chemical-vapor deposition (MOCVD). The multi-quantum wells (MQWs) active region is consists of 4 periods the nonpolar a-plane InGaN/GaN(a-InGaN/GaN) on a high quality a-plane GaN (a-GaN) template grown by using the multibuffer layer technique. The full widths at half maximum (FWHMs) of x-ray rocking curve (XRC) obtained from phiscan of the specimen that was grown up to nonpolar a-plane GaN LED layers with double crystal x-ray diffraction. The FWHM values were decreased down to 477 arc sec for $0^{\circ}$ and 505 arc sec for $-90^{\circ}$, respectively. After fabricating a conventional lateral LED chip which size was $300{\times}600{\mu}m^2$, we measured the optical output power by on-wafer measurements. N-electrode was made with Cr/Au contact, and ITO on p-GaN was formed with Ohmic contact using Ni/Au followed by inductively coupled plasma etching for mesa isolation. The optical output power of 1.08 mW was obtained at drive current of 20 mA with the peak emission wavelength of 502 nm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.368-368
• /
• 2012

무기물 나노입자를 포함하는 유기물/무기물 나노복합체는 플렉시블 전자 소자에 적용이 가능하기 때문에 차세대 비휘발성 메모리 소자에 대한 응용연구가 활발히 진행되고 있다. 본 논문에서는 $CuInS_2$ (CIS)/ZnS 코어-쉘 나노 입자를 포함한 poly(N-vinylcarbazole) (PVK) 고분자 박막을 기억 매체로 사용하는 유기 쌍안정성 소자(organic bistable devices, OBD) 메모리 소자를 제작하고 전기적 성질에 대하여 관찰하고 전하 수송 메카니즘에 대하여 규명하였다. 화학적 방법으로 형성한 CIS/ZnS 코어-쉘 나노 입자와 PVK를 toluene 용매에 녹인 후 초음파 교반기를 사용하여 나노 복합 소재를 형성하였다. 하부 전극으로 indium-tin-oxide (ITO)가 증착되어 있는 유리 기판 위에 나노 복합 소재를 스핀코팅 방법으로 도포한 후 열을 가해 잔류 용매를 제거하였다. CIS/ZnS 코어-쉘 나노 입자가 분산되어 있는 PVK 나노 복합 소재로 구성된 박막위에 상부 전극으로 Al을 열증착하여 메모리 소자를 제작하였다. 전류-전압 (I-V) 측정 결과에서 저전압에서는 전도도가 낮은 OFF 상태를 유지하다 어느 특정 양의 전압에서 전도도가 갑자기 증가하여 높은 전도도의 ON 상태로 전이되는 쌍안정성이 관찰되었다. 전류의 ON/OFF 비율은 약 $10^3$이며 역방향 바이어스를 가해주었을 때 특정 음의 전압에서 전도도가 ON 상태에서 OFF 상태로 전환되는 전형적인 OBD 메모리 소자의 I-V 특성을 나타났다. 메모리 전하 수송 메커니즘 분석 결과 쓰기 과정은 thermionic emission (TE), space-charge-limited-current (SCLS) 모델과 지우기 과정은 Fowler-Nordheim (FN) 터널링 모델로 설명이 되었다. 제작된 소자에 대해 기억 시간 측정 결과는 ON과 OFF 상태의 전류가 장시간에도 변화가 거의 없는 소자의 안정성을 보여주었다. 이 실험 결과는 CIS/ZnS 코어-쉘 나노 입자가 분산되어 있는 PVK 나노 복합 소재를 사용하여 안정성을 가진 OBD 메모리 소자를 제작할 수 있음을 보여주고 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.390-390
• /
• 2012

Information technology industries has grown rapidly and demanded alternative memories for the next generation. The most popular random access memory, dynamic random-access memory (DRAM), has many advantages as a memory, but it could not meet the demands from the current of developed industries. One of highlighted alternative memories is magnetic random-access memory (MRAM). It has many advantages like low power consumption, huge storage, high operating speed, and non-volatile properties. MRAM consists of magnetic-tunnel-junction (MTJ) stack which is a key part of it and has various magnetic thin films like CoFeB, FePt, IrMn, and so on. Each magnetic thin film is difficult to be etched without any damages and react with chemical species in plasma. For improving the etching process, a high density plasma etching process was employed. Moreover, the previous etching gases were highly corrosive and dangerous. Therefore, the safety etching gases are needed to be developed. In this research, the etch characteristics of CoFeB magnetic thin films were studied by using an inductively coupled plasma reactive ion etching in $CH_4/O_2/Ar$ gas mixes. TiN thin films were used as a hardmask on CoFeB thin films. The concentrations of $O_2$ in $CH_4/O_2/Ar$ gas mix were varied, and then, the rf coil power, gas pressure, and dc-bias voltage. The etch rates and the selectivity were obtained by a surface profiler and the etch profiles were observed by a field emission scanning electron microscopy. X-ray photoelectron spectroscopy was employed to reveal the etch mechanism.

• 한국분말재료학회지
• /
• 제23권2호
• /
• pp.95-101
• /
• 2016

Carbon nanofiber (CNF) composites coated with spindle-shaped $Fe_2O_3$ nanoparticles (NPs) are fabricated by a combination of an electrospinning method and a hydrothermal method, and their morphological, structural, and chemical properties are measured by field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. For comparison, CNFs and spindle-shaped $Fe_2O_3$ NPs are prepared by either an electrospinning method or a hydrothermal method, respectively. Dye-sensitized solar cells (DSSCs) fabricated with the composites exhibit enhanced open circuit voltage (0.70 V), short-circuit current density ($12.82mA/cm^2$), fill factor (61.30%), and power conversion efficiency (5.52%) compared to those of the CNFs (0.66 V, $11.61mA/cm^2$, 51.96%, and 3.97%) and spindle-shaped $Fe_2O_3$ NPs (0.67 V, $11.45mA/cm^2$, 50.17%, and 3.86%). This performance improvement can be attributed to a synergistic effect of a superb catalytic reaction of spindle-shaped $Fe_2O_3$ NPs and efficient charge transfer relative to the one-dimensional nanostructure of the CNFs. Therefore, spindle-shaped $Fe_2O_3$-NP-coated CNF composites may be proposed as a potential alternative material for low-cost counter electrodes in DSSCs.