• 공학논문집
• /
• 제2권1호
• /
• pp.49-56
• /
• 1997

Emission computed tomography에 있어서 Bayesian방법에 근거한 통계학적 영상 재구성법이 수년간에 걸쳐 중요한 관심사로 대두되어 왔다. 이는 Bayesian 접근 방법을 사용할 경우 영상 재구성 알고리즘에 재구성하고자 하는 영상에 대한 사전정보를 포함시킬 수 있기 때문이었다. 이러한 방법은 경우에 따라 향상된 성능을 보이고 있으나, 막대한 계산시간으로 인해 실제 임상에 적용되기가 매우 어려운 상황이다. 한편, filtered backprojection(FBP)은 알고리즘 자체가 간단하고 계산시간도 매우 단축되므로 대부분의 임상에 널리 적용되고 있다. 본 연구에서는 Bayesian 영상 재구성에서 매우 유용하게 사용되는 spline 모델을 FBP의 고주파 감쇠를 위한 정칙자로 사용함으로써 FBP 영상 재구성에 Bayesian 방법과 유사한 효과를 얻을 수 있음을 보인다.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.23-27
• /
• 2014

The use of electromagnetic energy and non-equilibrium plasma for enhancing ignition and combustion stability is receiving increased attention recently. The conventional technologies have adapted the electrical devices to make the electromagnetic field, which resulted in various safety issues such as high-maintenance, additional high-cost system, electric shock and explosion. Therefore, an electrodeless microwave technology has an advantage for economic and reliability compared with conventional one because of no oxidation. However, the application of microwave has been still limited because of lack of interaction mechanism between flame and microwave. In this study, an experiment was performed with jet diffusion flames induced by microwaves to clarify the effect of microwave on the combustion stability and pollutant emissions. The results show that microwave induced flames enhanced the flame stability and blowout limit because of abundance of radical pool. However, NOx emission was increased monotonically with microwave intensity except 0.2 kW, and soot emission was reduced at the post flame region.

• 한국연소학회지
• /
• 제21권2호
• /
• pp.22-28
• /
• 2016

High efficient and environment friendly combustion technologies are used to be operated an extreme condition, which results in unintended flame instability such as extinction and oscillation. The use of electromagnetic energy is one of methods to enhance the combustion stability and a microwave as electromagnetic wave is receiving increased attention recently because of its high performance and low-cost system. In this study, an experiment was performed with jet diffusion flames induced by microwave. Micro jet was introduced to simulate the high velocity of industrial combustor. The results show that micro jet flames had three different modes with increasing oxidizer velocity; attached yellow flame, lifted flame, and lifted partially premixed flame. As a microwave was induced to flames, the overall flame stability and blowout limit were extended with the higher microwave power. Especially the interaction between a flame and a microwave was shown clearly in the partially premixed flame, in which the lift-off height decreased and NOx emission measured in post flame region increased with increasing microwave power. It might be attributed to increase of reactivity due to the abundance of radical pool and the enhanced absorption to thermal energy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.923-926
• /
• 2004

Active-matrix field emission display (AMFED) based on carbon nanotube (CNT) emitter and amorphous silicon thin-film transistor (a-Si TFT) is reviewed. The AMFED pixels consisted of a high-voltage a-Si TFT and mesh-gated CNT emitters. The developed AMFED panel showed a high performance with a driving voltage of below 15 V. The low-cost and large-area AMFED approach with a metal mesh technology will be discussed.

• 한국환경보건학회지
• /
• 제26권3호
• /
• pp.81-85
• /
• 2000

In order to reduce emission of air pollutants from spot incineration, it is required to develope the combustion chamber of small wastes incinerator having combustion efficiency. The characteristics of combustion of the incinerator with combustion chamber having tangential angels with surface of 45$^{\circ}$of air supply nozzles were studied in accordance with non-grate, fixed-grate and shaking-grate in the combustion chamber. Combustion conditions were evaluated with combustion efficiency, emission of hazardous gases, temperatures, ignition loss of ash and so on. Combustion efficiencies were shown 73.9% for non-gate, 81.1% for fixed-grate and 89.0% for shaking-grate. Emissions of CO were revealed 6.52 ppm for non-grate, 273 ppm for fixed-grate and 224 for shaking-grate. Comprehensively evaluated, combustion conditions got better in order of shaking-grate, fixed-grate and non-grate. This study suggests that small wastes incinerator should have shaking-or fixed-grate in combustion chamber to get better combustion condition even though at expensive cost of manufacturing.

• KEPCO Journal on Electric Power and Energy
• /
• 제3권1호
• /
• pp.35-39
• /
• 2017

Recently, the public opinion is growing that the main cause of greenhouse gas, fine dust and nitrogen oxide, sulfuric acid emission is coal-fired power plant, and now the decommission or conversion to other clean fuel is being demanded. However, it is a huge national loss to decommission coal-fired power plant with remaining life, and also simple fuel converting to natural gas will lead to drastic rise on power generating cost. Therefore, this study aims to provide the analysis result about the reduction effect of $CO_2$, environment emission, and to influence to power plant performance and facilities when repowering with adding gas turbine is applied to domestic aged coal-fired power plant.

• 한국대기환경학회지
• /
• 제2권1호
• /
• pp.103-110
• /
• 1986

Since sulfur dioxide is released from the oxidation of sulfur in fuel, the level of $SO_2$ in industrial areas can be effectively managed by optimizing the allocation of fuels: the fuel should be allocated to each industries so as to achieve the air quality goal in the area with minimum fuel cost. The solution for this can be by solved using linear programming technique incorporated with the Gaussian dispersion equation. When this method was applied in Ulsan Industrial Complex, 39.3% of fuel expense could be saved compared with the present uniform fuel policy. With this method, bituminous coal generally was allocated to big emission sources such as power plants or to industries sparsely located in remote areas, and LPG or low-sulfur oils to small or medium-size sources in dense indurstrial aras. However, the particulates emission will increase with this policy, because it maximizes the use of coal within the limit to achieve the air quality goal in the area.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 추계학술대회 논문집
• /
• pp.71-72
• /
• 2008

• 자원ㆍ환경경제연구
• /
• 제10권3호
• /
• pp.367-386
• /
• 2001

In this paper we analyze the environmental advantages of district heating system. We construct three econometric models to analyze the energy consumption and economic cost as well as the emission of the major pollutants like $SO_x$, $NO_x$, DUST, and $CO_2$. As the size of heating supply is larger, the district heating system is evaluated to be better than other heating systems environmentally and costly in the long run. Especially, the district heating reduces $SO_x$ emission significantly when the size of heat production is large. But the advantages of district heating system are very sensitive to the fuel mix and heat source.

• 한국경영과학회지
• /
• 제18권1호
• /
• pp.79-95
• /
• 1993

MARKAL (MARKet ALlocation) Model, one of the most sophisticated energy technology assessment model is applied to finding the optimum mix of energy sources and evaluating energy technology competitiveness in Korea. The model is capable of handling Multiple Objective Linear Programming to test the related cost minimization and environmental control function. In this paper three environmental regulation scenarios are observed including 10% and 20% reduction of carbon dioxide emission level. For the purpose of establishing the basic data base, Korea Reference Engergy System is also developed on the base of the year 1989 with technology utilization and energy flow analysis.