• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.5
• /
• pp.488-496
• /
• 2003

To establish nondestructive test method for rocket motor assembly with rubber and aerospace composite materials, practicable quality control acoustic emission test method is presented. Structural analysis for motor assembly is performed by ABAQUS code and analysis output result is confirmed by strain gage and AE data. Various specimens were tested and analyzed using strain gage and acoustic emission data. The hit rate of acoustic emission was closely related with case/rubber debonding. This report also describes practicable acoustic emission nondestructive method for evaluating motor case assembly quality assurance in the industrial field.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.3
• /
• pp.313-318
• /
• 2001

To establish nondestructive test method for aerospace composite materials, various composite specimens were tested and analyzed using acoutic emission. The hit rate of acoustic emission closely was rotated with crack initiation and propagation. This report also presents defection capability of crack initiation pressure, initial crack active location, and crack propagation using acoustic emission.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.55-56
• /
• 2000

We report the fabrication of carbon nanostureture films with excellent electron-emission characteristics on chrome electrodes using a pre-deposited transition metal catalyst layer. The emission current densities of 1 ${\mu}A/cm^2$ and 1 $mA/cm^2$ were measured at the electric field of 2.5 and 4.8 $V/{\mu}m$, respectively, and the current fluctuation of less than 2.5% was observed at the average current density 211 ${\mu}A/cm^2$ for the measurement duration of 20 minutes. We counted more than ${\sim}10^4$ emission sites per $cm^2$ from the emission images, and also noticed good mechanical stability. Moreover, we were able to fabricate good electron-emitting carbon films on chrome electrodes on Corning glass substrates at the nominal temperature below $650^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2333-2337
• /
• 2012

We report the synthesis and thermal annealing of Si-core/ZnO-shell nanorods using a two-step process comprising the metal-assisted electroless etching of Si and the sputter deposition of ZnO. Transmission electron microscopy and X-ray diffraction analysis showed that the cores of the annealed core-shell nanorods were single crystal diamond cubic-type Si, whereas the shells of the annealed core-shell nanorods were single crystal wurtzite-type ZnO. The PL spectra of Si nanorods consisted of a broad red emission band and a weaker blue emission band. The major emission band of Si nanorods was shifted from 700 nm (in the red region) to 440 nm (in the violet region) by ZnO coating. The violet emission of the core-shell nanorods was enhanced in intensity considerably by annealing in an oxidizing atmosphere. The origin of the PL enhancement by annealing is also discussed.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.76-84
• /
• 1998

In this 1st report, the relationship between pure creep properties and initial strain was studied and also its acoustic emission test was performed during creep test at 500, 600 and $700^{\circ}C$. And the applicability of the acoustic emission technique was investigated to analyze the quantitive relationship between all the pure properties (creep strength, creep repture time or creep life, steady state creep rate, total creep rate, creep strain, total creep strain, etc.) and the initial strains as well as to analyze AE properties during the pure creep loading condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.193-194
• /
• 2009

This report makes an important correction to estimating angular dependent emission pattern of Organic Light-Emitting Diodes (OLEDs). Today, experiments on measuring angular light intensity of OLEDs are conducted without considering the difference between the view angle identified by photodiode and the actual angle being measured. ITO-TPD-$Alq_3$-LiF-Al Organic Light-Emitting Diode was used to find out the degree of the error. In this case, the difference in average was about $1^*$, which is highly significant. Since the difference varies from case to case, the need for adjustment must be evaluated for each case.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.585-587
• /
• 2004

We report the characterization of white light emitting devices fabricated using conjugated polymer blends. Blue emissive poly[9,9-bis(4'-n-octyloxyphenyl) fluorene-2,7-diyl-co-10-(2'-ethylhexyl)phenothiazine-3,7-diyl] [poly(BOPF-co-PTZ)] and red emissive poly(2-(2'-ethylhexyloxy)-5-methoxy-1,4-phenylenevinylene) (MEH-PPV) were employed in the blends. The inefficient energy transfer between these blue and red light emitting polymers (previously deduced from the PL spectra of the blend films) enables the production of white light emission through control of the blend ratio. The PL and EL emission spectra of the blend systems were found to vary with the blend ratio. The EL devices were fabricated in the ITO/PEDOT/blend/LiF/Al configuration and white light emission was obtained for one of the tested blend ratios.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.293-296
• /
• 2003

We report on the fabrication and field emission of carbon nanotube field emitters for mass spectrometer. Due to its high aspect ratio and mechanical strength, we use vertically aligned multi-wall carbon nanotubes prepared by thermal chemical vapour deposition as cathodes, Electrons emitted from a CNT are to ionize some sample molecules. We have successfully attained patterned carbon nanotubes grown on two-dimensional 0.7 mm by 0.7 mm Ni square blocks on Si. The emission characteristics show that the field emission initiates at 200 V.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2010.04a
• /
• pp.41-44
• /
• 2010

Hazardous air pollutants such as benzo[a]pyrene (BaP), benzene, formaldehyde have been concerned about the adverse health effect of long-term exposure. Contour map is useful for finding high-concentration region, emission source, and distributions of HAPs in the ambient air. To make a contour map, we have developed simple analytical method for selected HAPs; polycyclic aromatic hydrocarbons such as BaP, benzene and its derivatives such as toluene and xylene, and aldehydes and ketones. We have applied these methods to investigate air pollution by HAPs in some cities in Japan. The results show that these methods reveal actual emission sources if the PRTR emission report was not submitted.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.928-931
• /
• 2003

In order to realize full color display, two approaches were used. The first method is the patterning of red, green, and blue emitters using a selective deposition. Another approach is based on a white-emitting diode, from which the three primary colors could be obtained by micro-patterned color filters. White-light-emitting organic light emitting devices (OLEDs) are attracting much attention recently due to potential applications such as backlights in liquid crystal displays (LCDs) or other illumination purposes. In order for the white OLEDs to be used as backlights in LCDs, the light emission should be bright and have Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.33, 0.33). For obtaining white emission from OLEDs, different colours should be mixed with proper balances even though there are a few different methods for mixing colors. In this study, we will report a white organic electroluminescent device using exciton diffusion length concept.