• 비파괴검사학회지
• /
• 제23권5호
• /
• pp.488-496
• /
• 2003

본 연구에서는 금속재 연소관내부에 단열고무/내열복합재로 구성된 연소관 조립체의 품질평가에 적용 가능한 음향방출 비파괴 시험 평가 기법을 정립하기 위하여 그간 수행되었던 시험결과를 종합하여 실제 생산에 적용 가능한 평가 기법을 정립하였다. 유한요소 code를 사용하여 연소관 조립체 구조 해석한 결과를 바탕으로 내열복합재에 절개선이 있는 연소관 표면의 스트레인과 절개선이 없는 연소관 표면의 스트레인 값을 비교하였다 해석결과는 공압시험 중 연소관 표면에 부착된 스트레인 값과 음향방출센서로부터 측정된 신호와 비교함으로써 연소관과 단열고무 접착성이 확인되었다. 음향방출법을 이용하여 금속재 연소관과 단열고무와의 접착성을 평가하는 방법으로서 실제 생산과정에 적용 가능함을 확인하였다.

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.313-318
• /
• 2001

본 연구에서는 복합재료에 적용 가능한 음향방출 비파괴 시험 평가 기법의 정립을 목표로, 복합재 표준 시험용 평가 시편(STEB), 금속재 압력용기 내부의 복합재 내열튜브, 추진기관 토출관 등의 수압 보증 시험에서 음향방출 시험법을 적용하였다. 복합재 표준 시험용 평가 시편의 경우 음향방출 hit rate parameter를 이용하여 파열압력이 낮은 시편(2100psi이하)과, 파열압력이 높은 시편(2100psi이상)과의 구분이 가능하였으며, 파열압력이 낮은 시편은 파열압력의 50%범위내에서 과열위치의 탐지가 가능하였다. 금속재 압력용기 내부의 복합재료 내열튜브 및 추진기관 토출관의 시험 결과, 수압시험 중 크랙의 발생 압력, 초기 발생 위치, 및 진전과정의 탐지가 가능하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.55-56
• /
• 2000

We report the fabrication of carbon nanostureture films with excellent electron-emission characteristics on chrome electrodes using a pre-deposited transition metal catalyst layer. The emission current densities of 1 ${\mu}A/cm^2$ and 1 $mA/cm^2$ were measured at the electric field of 2.5 and 4.8 $V/{\mu}m$, respectively, and the current fluctuation of less than 2.5% was observed at the average current density 211 ${\mu}A/cm^2$ for the measurement duration of 20 minutes. We counted more than ${\sim}10^4$ emission sites per $cm^2$ from the emission images, and also noticed good mechanical stability. Moreover, we were able to fabricate good electron-emitting carbon films on chrome electrodes on Corning glass substrates at the nominal temperature below $650^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2333-2337
• /
• 2012

We report the synthesis and thermal annealing of Si-core/ZnO-shell nanorods using a two-step process comprising the metal-assisted electroless etching of Si and the sputter deposition of ZnO. Transmission electron microscopy and X-ray diffraction analysis showed that the cores of the annealed core-shell nanorods were single crystal diamond cubic-type Si, whereas the shells of the annealed core-shell nanorods were single crystal wurtzite-type ZnO. The PL spectra of Si nanorods consisted of a broad red emission band and a weaker blue emission band. The major emission band of Si nanorods was shifted from 700 nm (in the red region) to 440 nm (in the violet region) by ZnO coating. The violet emission of the core-shell nanorods was enhanced in intensity considerably by annealing in an oxidizing atmosphere. The origin of the PL enhancement by annealing is also discussed.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.76-84
• /
• 1998

In this 1st report, the relationship between pure creep properties and initial strain was studied and also its acoustic emission test was performed during creep test at 500, 600 and $700^{\circ}C$. And the applicability of the acoustic emission technique was investigated to analyze the quantitive relationship between all the pure properties (creep strength, creep repture time or creep life, steady state creep rate, total creep rate, creep strain, total creep strain, etc.) and the initial strains as well as to analyze AE properties during the pure creep loading condition.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.193-194
• /
• 2009

This report makes an important correction to estimating angular dependent emission pattern of Organic Light-Emitting Diodes (OLEDs). Today, experiments on measuring angular light intensity of OLEDs are conducted without considering the difference between the view angle identified by photodiode and the actual angle being measured. ITO-TPD-$Alq_3$-LiF-Al Organic Light-Emitting Diode was used to find out the degree of the error. In this case, the difference in average was about $1^*$, which is highly significant. Since the difference varies from case to case, the need for adjustment must be evaluated for each case.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.585-587
• /
• 2004

We report the characterization of white light emitting devices fabricated using conjugated polymer blends. Blue emissive poly[9,9-bis(4'-n-octyloxyphenyl) fluorene-2,7-diyl-co-10-(2'-ethylhexyl)phenothiazine-3,7-diyl] [poly(BOPF-co-PTZ)] and red emissive poly(2-(2'-ethylhexyloxy)-5-methoxy-1,4-phenylenevinylene) (MEH-PPV) were employed in the blends. The inefficient energy transfer between these blue and red light emitting polymers (previously deduced from the PL spectra of the blend films) enables the production of white light emission through control of the blend ratio. The PL and EL emission spectra of the blend systems were found to vary with the blend ratio. The EL devices were fabricated in the ITO/PEDOT/blend/LiF/Al configuration and white light emission was obtained for one of the tested blend ratios.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.293-296
• /
• 2003

We report on the fabrication and field emission of carbon nanotube field emitters for mass spectrometer. Due to its high aspect ratio and mechanical strength, we use vertically aligned multi-wall carbon nanotubes prepared by thermal chemical vapour deposition as cathodes, Electrons emitted from a CNT are to ionize some sample molecules. We have successfully attained patterned carbon nanotubes grown on two-dimensional 0.7 mm by 0.7 mm Ni square blocks on Si. The emission characteristics show that the field emission initiates at 200 V.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2010년도 춘계학술대회 논문집
• /
• pp.41-44
• /
• 2010

Hazardous air pollutants such as benzo[a]pyrene (BaP), benzene, formaldehyde have been concerned about the adverse health effect of long-term exposure. Contour map is useful for finding high-concentration region, emission source, and distributions of HAPs in the ambient air. To make a contour map, we have developed simple analytical method for selected HAPs; polycyclic aromatic hydrocarbons such as BaP, benzene and its derivatives such as toluene and xylene, and aldehydes and ketones. We have applied these methods to investigate air pollution by HAPs in some cities in Japan. The results show that these methods reveal actual emission sources if the PRTR emission report was not submitted.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.928-931
• /
• 2003

In order to realize full color display, two approaches were used. The first method is the patterning of red, green, and blue emitters using a selective deposition. Another approach is based on a white-emitting diode, from which the three primary colors could be obtained by micro-patterned color filters. White-light-emitting organic light emitting devices (OLEDs) are attracting much attention recently due to potential applications such as backlights in liquid crystal displays (LCDs) or other illumination purposes. In order for the white OLEDs to be used as backlights in LCDs, the light emission should be bright and have Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.33, 0.33). For obtaining white emission from OLEDs, different colours should be mixed with proper balances even though there are a few different methods for mixing colors. In this study, we will report a white organic electroluminescent device using exciton diffusion length concept.