• 전기학회논문지
• /
• 제59권1호
• /
• pp.33-39
• /
• 2010

In order to operate the power system satisfactory for both system operators and customers, it is important to limit the harmonic currents to the allowable levels which injected into the system from the distorting installations. In this regard, the principles for the allocation of emission limits on individual customer were introduced in the technical report of IEC61000-3-6. According to these general principles, the emission limits are dependent on the agreed power of the customer, the power of the harmonic-generating equipment, and the system characteristics. The considerations in this report are very comprehensive and the process introduced is practical enough to implement as it is. However, there is a fact not appropriately dealing in the report that could be a very tickle but has a huge impact on determining the emission limit. This is the effect of non-harmonic load currents. More precisely, these are from the equipments which do not emit any harmonic or may emit harmonics but this specific order under the consideration by themselves if the source power is sinusoidal. The load currents originated from these equipments have an effect of active filter against the specific order of harmonic therefore, these should be dealt as a significant factoron the process of determining the emission limits for individual customer.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권1호
• /
• pp.11-23
• /
• 2000

Photochemical air quality models are essential tools in predicting future air quality and assessing air pollution control strategies. To evaluate air quality using a photochemical air quality model, emission inventories are important inputs to these models. Since most emission inventories are provided at a county-level, these emission inventories need to be geographically allocated to the computational grid cells of the model prior to running the model. The conventional method for the spatial allocation of these emissions uses "spatial surrogate indicators", such as population for mobile source emissions and county area for biogenic source emissions. In order to examine the applicability of such approximations, more detailed spatial surrogate indicators were developed using Geographic Information System(GIS) tools to improve the spatial allocation of mobile and boigenic source emissions, The proposed spatial surrogate indicators appear to be more appropriate than conventional spatial surrogate indicators in allocating mobile and biogenic source emissions. However, they did not provide a substantial improvement in predicting ground-level ozone(O3) concentrations. As for the carbon monoxide(CO) concentration predictions, certain differences between the conventional and new spatial allocation methods were found, yet a detailed model performance evaluation was prevented due to a lack of sufficient observed data. The use of the developed spatial surrogate indicators led to higher O3 and CO concentration estimates in the biogenic source emission allocation than in the mobile source emission allocation.llocation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2058-2063
• /
• 2010

United Nations Framework Convention on Climate Change(UNFCCC) is one of the international environmental convention with the goal of stabilizing Greenhouse Gas(GHG) concent in the atmosphere and preventing potentially dangerous change in the earth's climate. The purpose of this convention is to reduce fossil fuel consumption and to prevent GHG emission. The Republic of Korea was one of the Annex-II parties submitted its national communication to the UNFCCC. As a developing county, there is no GHG emission reduction commitments made by South Korea during first commitment period(2008~2012). On the contrary, South Korea' status as an OECD member, joining in 1996, ranks 6th in GHG emission. Furthermore the rate of increase of GHG is first among OECD countries in year 2005. As a result, Korea will probably be incorporated into Annex-I in second commitment period (after 2013). So, Korea government established and announced Voluntary GHG Reduction scheme to reduce emissions of 4%(accounting for 30% reduction base on Business As Usual) from the 2005 level by the year 2020 for mitigation of reduction duty impact. In specific case of Korea, transportation section occupied almost 21% of total energy consumption and nearly 17% of total GHG emission at 2005, so systematic emission management is required. To do so, in this research, we focus on systematic way of GHG management system to handle GHG reduction duties in Railroad section.

• Environmental Engineering Research
• /
• 제17권1호
• /
• pp.27-34
• /
• 2012

This paper deals with the evaluation of environmental impact of rail and road transport in South Korea. A framework of energy input-output analysis is employed to estimate the total energy consumption and $CO_2$ emission in acquiring and using a life cycle of passenger and freight transport activity. The reliability of $CO_2$ emission based on uncertainty values is assessed by means of a Monte Carlo simulation. The results show that on a passenger-kilometers basis, passenger roads have life cycle emissions about 1.5 times those of rail, while that ratio is ten times greater when the scope of evaluation regards the tailpipe. In the case of freight transport, on a million ton-kilometers basis, the value for road mode is estimated to be about three times compared to those of rail mode. The results also show that the main contribution of $CO_2$ emission for road transport is the operation stage, accounting for 70%; however, the main contribution for rail transport is the construction and supply chain stage, accounting for over 50% emission.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.277-282
• /
• 2006

With the aim of achieving half the regulated value of EURO-3 Emission Regulations, an ultra low emission motorcycle has been developed based on a motorcycle with an 1800 $cm^3$, horizontal opposed 6-cylinder engine. For the fuel supply system, an electronically controlled fuel injection system was applied. For the emission purification system, three-way catalysts, a feedback control system with a LAF(Linear Air-Fuel ratio) sensor, and a secondary air induction system were applied. To reduce CO and HC emissions during cold starting, an early catalyst activation method combining RACV(Rotary Air Control Valve) and retarded ignition timing was applied. After the catalyst activation, air-fuel ratio was controlled to maximize the purification ratio of the catalyst according to vehicle speed. For the air-fuel ratio control system, the LAF sensor was used. Furthermore, fine adjustment by the LAF feedback control reduced torque fluctuation due to the air-fuel ratio change. As a result, smooth ride feeling was maintained. Owing to these technologies, half the regulated value of EURO-3 has been achieved without any negative impact to the large-scaled motorcycles' drivability. This paper presents the developed ultra low emission technologies including the control method using an LAF sensor.

• Journal of Korea Trade
• /
• 제25권2호
• /
• pp.58-74
• /
• 2021

Purpose - This paper research on the embodied carbon emission in Sino-Korea trade. It calculates and analyzes the carbon emission coefficient and specific carbon emissions in Sino-Korea trade from 2005 to 2014. Design/methodology - This paper conducted an empirical analysis for embodied carbon emission in Sino-Korea trade during the years 2005-2014, using a multi-region input-output model. First, direct and complete CO2 emission coefficient of the two countries were calculated and compared. On this basis, combined with the world input-output table, the annual import and export volume and sector volume of embodied carbon emission are determined. Then through the comparative analysis of the empirical results, the reasons for the carbon imbalance in Sino-Korea trade are clarified, and the corresponding suggestions are put forward according to the environmental protection policies being implemented by the two countries. Findings - The results show that South Korea is in the state of net trade export and net embodied carbon import. The carbon emission coefficient of most sectors in South Korea is lower than that of China. However, the reduction of carbon emission coefficient in China is significantly faster than that in South Korea in this decade. The change of Korea's complete CO2 emission coefficient shows that policy factors have a great impact on environmental protection. The proportion of intra industry trade between China and South Korea is relatively large and concentrated in mechanical and electrical products, chemical products, etc. These sectors generally have large carbon emissions, which need to be noticed by both countries. Originality/value - To the best knowledge of the authors, this study is the first attempt to research the embodied carbon emission of ten consecutive years in Sino-Korea Trade. In addition, In this paper, some mathematical methods are used to overcome the error problem caused by different statistical caliber in different databases. Finally, the accurate measurement of carbon level in bilateral trade will provide some reference for trade development and environmental protection.

• 한국BIM학회 논문집
• /
• 제6권4호
• /
• pp.9-17
• /
• 2016

Currently whole-house refurbishment for substantial energy efficiency improvement of existing housing stock is needed to achieve the targeted 80% CO2 emission reduction. As whole-house refurbishment requires a larger capital investment for lower CO2 emission, the simultaneous use of Life Cycle Costing (LCC) and Life Cycle Assessment (LCA) methodologies are recommended to generate affordable refurbishment solutions. However, two methodologies are difficult to use due to a lack of proper LCC and LCA datasets. As a response to the current problems, many researchers explore potentials in Building Information Modelling (BIM) to improve current construction practice. As a result, a BIM tool - IES IMPACT (Integrated Material Profile And Costing Tool) - has been introduced to the UK construction industry for simultaneous calculation of LCC and LCA. Thus, this research aims at examining the capability and limitation of the IES VE/IMPACT as a BIM tool for whole-house refurbishment. This research reveals that the IES VE/IMPACT is feasible for whole-house refurbishment by providing LCC and LCA information simultaneously for informed decision on refurbishment solution selection. This research shed lights on the current problems lying on the data exchange between two different BIM tools. It is revealed that additional efforts from construction professionals and industry are required to make reliable BIM objects library with LCC and LCA datasets.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.151-158
• /
• 2007

The static and dynamic behaviour of VGT and EGR systems has a significant impact on overall engine performance, fuel economy and exhaust emissions. This is because they define the state and composition of the air charge entering the engine. This work focused on the effect of the aperture ratio of VGT and EGR on the emission and flow characteristics under partial loads conditions. The investigation carried out using 2 liter PCCI 4 cylinder diesel engine with VGT and EGR. The result of this study shows that smoke increases with increasing EGR rate and NOx decreases with increasing EGR rate. It was also found that the residual gas contents greatly impact on soot emission under partial load condition. Finally, it can be concluded that VGT and EGR aperture ratio can greatly impact not only on soot and NOx but also air charging.

• 한국대기환경학회지
• /
• 제17권4호
• /
• pp.331-345
• /
• 2001

The increase of carbon monoxide in the ambient air due to the emissions from point sources without control was estimated using three -dimensional numerical models. The target area was Ulsan where one of the largest industrial complexes was located. As a typical example using numerical models for air quality impact analysis of criteria pollutants that will determine whether the air quality standards would be exceeded or not, the following approaches were suggested. They include: (1) investigation of pre-existing atmospheric conditions, (2) identification of major factors causing high concentrations, (3) selection of episode days. (4) preparation of three-dimensional meteorological data, (5) confirmation of agreement between measured and predicted concentrations in the emission conditions of episode days, and (6) estimation of the impact due to changes of the emission conditions. In the present work, daily meteorological conditions for the specific period were classified into four clusters of distinctive features, and the episode days were selected individually from each cluster. Emphasis was placed on the selection of episodes representing meteorological conditions conducive to high concentrations especially for point sources that were sensitive to the wind direction variations.

• 청정기술
• /
• 제3권1호
• /
• pp.88-95
• /
• 1997

Energy required, air emission, and solid waste generation are calculated with available foreign data ad domestic status using Life Cycle Analysis in order to compare the environmental impact of beverage containers such as PET bottle, aluminum can, glass bottle, and paper pack. Glass bottles are found to be the worst acceptability when considering only recycling rate of glass cullet, however it becomme the best when the refill(reuse) rate of glass bottles is accounted into. To assess tile current and future environmental impact of beverage containers, energy required, air emission, solid waste generation of current data and recycling goals are compared. As a result of the study, recycling of each containers and the reuse of glass bottles must be increased by governmental enforcement to reduce the environmental impacts by beverage containers. Further study on this subject using detailed LCA(life cycle assessment) data should be implemented for the exact environmental and economic assessment.