• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.187-192
• /
• 2012

Recently, the electric device has been launching owing to the development of industry. That development also can maximize the efficiency of generator. The emergency rescue vehicle operation differs from ordinary vehicles in engine life and usage distances. For the application of this system, this research proposes the ways to operate the emergency rescue vehicle operations more efficiently. Currently, many power systems, especially motors, developed with a large output of power. It is possible to produce electricity in the engine room with enough space and to operate all equipment within the rating load capacity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1565-1566
• /
• 2015

As a result of increasing power demand and concern about power supply shortage in the world, various energy sources without depletion of fossil fuel are installed to electrical network. Above all, nuclear energy can be considered as the most economical energy source to generate electricity. But recently, due to problem of safety which has emerged as a key social issue, additional construction of nuclear power plants is difficult. In order to replace nuclear power, researches on the emergency generator have been actively conducting. This study conducted a survey of public institutions about specification of backup generator system and current states to secure available capacity.

• 수산해양기술연구
• /
• 제54권1호
• /
• pp.73-80
• /
• 2018

Intermittent duty of emergency generator has problems emitting large quantities of PM and NOx in exhaust gas. The aim of this study is to propose DPF system which can be applied to medium-large emergency generators. The system is composed of soot dust collector, silencer and filter trap, which is designed to reduce PM emissions at the emergency generator start-up. The pneumatic system controls a flow direction of exhaust gas to pass through the soot collector and filter trap until the engine reaches complete combustion condition. An experiment is performed to measure PM content and concentration to analyze the performance and characteristics of the proposed system.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.64-70
• /
• 2010

High capacity UPS and emergency generators are commonly employed at facilities where power interruption is not allowed. Nowadays, combinations of existing commercial incoming power and an emergency generator or combination of multiple generators and CTTS(Closed Transition Transfer Switch) is adopted sometimes for more reliable power supply. In this paper, application of CTTS and STS(Static Transfer Switch) to dual-power line is suggested for highly reliable uninterruptible power. By realizing such a system, construction of incoming power facilities, installation of emergency generator and large capacity UPS can be omitted, through which saving of the installation space and corresponding capital investment can be expected.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.192-196
• /
• 2001

These days, most of electric power facilities need high stability. Therefore integrated system has been required to monitor and control electronic power distribution system in fields at all times when the interruption of electric power has occurred. To construct this system, unit that convert and process the input signal from fields needed. And for control and monitoring from remote place MMI software is required. Lastly network equipments are required for real-time communications. So, in this paper, units for control and monitoring of emergency power generator and for electric power monitoring in normal electric power and interruption of electric power are developed. Also integrated remote system for monitoring in remote is developed.

• 한국응급구조학회지
• /
• 제8권1호
• /
• pp.189-197
• /
• 2004

The fate of a emergency patient is decided upon the extent of first aid in one hour after accident. Suitable diagnosis and treatment can raise the possibility of patient's life and reduce the recuperation time. We surveys papers which were The Korean Society Of Sports Medicine(1993-2004 yeas 405papers)and The Korean Society Of Emergency Medicine (1990-2004 yeas 797 papers). This paper got the following results through analyses of problems in emergency medical service system and of injures from sports. First, portable X-RAY equipment is needed to apply it to emergency. Second, it should have small and light structure compared with old equipments and have high voltage generator unit for X-RAY using inverter. Third, it should be able to send the shot data that is digital detector type without film to doctors in emergency center.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1260-1268
• /
• 2012

Recently, lack of power reserve margin was observed quite often. In this paper, we studied the method to secure power source for a short time, to cut the utility power peak load, and to reduce the users electricity bills. Emergency diesel generator of an office building is to be converted into a dual-fuel engine generator which is responsible for a portion of the peak load. Compared to the conventional diesel fuel generator, the proposed dual-fuel engine is able to reduce the generation power cost by dual-fuel combustion, and it also mitigates the building's utility power peak load by charging the building's peak load. If the dead resources (a group of emergency dual-fuel engine generators), as a Virtual Power Plant, are operating in peak time, we can significantly reduce future large power development costs. We investigated the current general purpose electricity bills as well as the records of the building electric power usage, and calculated diesel engine generator renovation costs, generation fuel costs, driving conditions, and savings in electricity bills. The proposed dual-fuel engine generation method reduces 18.1% of utility power peak load, and turned out to be highly attractive investment alternative which shows more than 27% of IRR, 76 million won of NPV, and 20~53 months of payback periods. The results of this study are expected to be useful to developing the policy & strategy of the energy department.

• 조명전기설비학회논문지
• /
• 제22권5호
• /
• pp.53-57
• /
• 2008

일반적으로 비상시 전원으로 디젤발전기를 가장 많이 사용하고 있으며, 하이브리드 전원소스(상용전원, 축전지, 연료전지, 태양전지 등)를 사용하여 부하에 안정적인 전력을 공급하기 위한 방법들이 연구되어지고 있다. 최근 비상시 전원으로 가장 많이 사용하고 있는 디젤발전기의 역할이 아주 중요하게 여겨지며, 운영부하에 따라서도 유연하게 동작되어야 하고, 신뢰성도 확보되어야 한다. 따라서 본 연구에서 부하 변동에 따른 최대전력 추종제어 기능이 가능하고, 고조파 억제 기능 및 안정주파수 유지기능이 가능하도록 부하 변동에 따른 디젤발전기의 제어기에 대하여 논하고자 한다.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1079-1088
• /
• 2018

A line overload emergency control strategy based on the source-load synergy coefficient is proposed in this paper. First, the definition of the source-load synergy coefficient is introduced. When line overload is detected, the source-load branch synergy coefficient and source-load distribution synergy coefficient are calculated according to the real-time operation mode of the system. Second, the generator tripping and load shedding control node set is determined according to the source-load branch synergy coefficient. And then, according to the line overload condition, the control quantity of each control node is determined using the Double Fitness Particle Swarm Optimization (DFPSO), with minimum system economic loss as the objective function. Thus load shedding for the overloaded line could be realized. On this basis, in order to guarantee continuous and reliable power supply, on the condition that no new line overload is caused, some of the untripped generators are selected according to the source-load distribution synergy coefficient to increase power output. Thus power supply could be restored to some of the shedded loads, and the economic loss caused by emergency control could be minimized. Simulation tests on the IEEE 10-machine 39-bus system verify the effectiveness and feasibility of the proposed strategy.

• 한국컴퓨터정보학회논문지
• /
• 제11권3호
• /
• pp.125-132
• /
• 2006

원자력 발전소에서 비상사태가 발생하는 경우를 대비하여 비상 발전기의 고장진단시스템을 구축할 필요가 있다. 고장진단시스템의 지식베이스를 구현하기 위해서는 클래스와 인과관계 모형을 설계해야 한다. 클래스와 인과관계 모형을 설계하기 위해 먼저 진단대상을 선정하고, 정상과 비정상의 상태정보를 조사하여 시스템의 작동 원리를 외부지식인 개체와 활동으로 추출한다. 추출된 외부지식을 내부지식으로 표현하기 위해 개체를 클래스로 정의하고 활동을 인과관계로 변환한다. 인과관계의 반복적인 설정과 타당성 검토를 통해 지식베이스에 이식할 수 있는 수준의 진단지식을 완성한다. 본 연구는 결정테이블을 통한 설계 모형의 독립성을 고려하였기 때문에 이식성 높은 지식베이스의 구현이 가능하다.