• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.110-117
• /
• 2003

The operational characteristics of the landing gear retraction/extension depend on the complexity of design variables operational/environmental conditions. In order to meet the requirements of minimum stow area and performance, the integration of the landing gear system requires operational kinematic and dynamic analysis considering an effect of its related system. This study investigates operational dynamic behaviors of the T-50 landing gear system using ADAMS. Taking into account for various operational/environmental conditions, an analysis of dynamic behavior on the landing gear operational characteristics is performed with experience derived from a wide range of proprietary designs. Analytical results are presented for discussing the effects of temperature, aerodynamic and maneuver load on normal/emergency operation of the landing gears and doors. This analysis leads us to the conclusion that the proposed program is shown to be a better quantitative one that apply to a new development and troubleshooting of the landing gear system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1543-1548
• /
• 2011

Structural analysis is performed to design anchor straps for a large-scale-liquefied-natural-gas (LNG) storage tank with corner protection and an inner tank by considering structural integrity. Anchor straps made of 9% nickel steel are attached to the inner tank, corner protection, and concrete raft to prevent the failure of the inner tank during both normal and emergency operating conditions. Two finite element (FE) models were analyzed in this study. One is a stand-alone model of the anchor strap, while the other is an extended model of the substructure of the anchor strap, inner tank, and corner protection. Three-dimensional shell elements are used to effectively assess the bending and axial behavior of structures. The Tresca stress values in each part of the two models are calculated for operation under five different load-condition cases: normal operation, leakage of the LNG, hydro test, and two earthquake conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.246-247
• /
• 2015

Type of Automatic Voltage Regulator (AVR) can be divided into Analog and Digital Type. Automatic Voltage Regulator (AVR) of the synchronous generators of the brushless type are to be reduced to the voltage fluctuation on the basis of the total load. The PID control method is a general control technique is commonly widely used. In this study, the control target parameter iPID does not reset the parameters of the controller for the variable (Intelligent PID) using the controller synchronous generator Digital automatic voltage to you like all applied to the adjusting device (AVR) the voltage change is small, improved responsiveness was studied in this controller.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2534-2539
• /
• 2015

Method for regulating voltage using a generator voltage regulating device (AVR) is divided in an existing analog system and a digital replacement. Typically, to adjust the voltage by using a brushless excitation system of the type to be reduced for a voltage change under all. The control method of the AVR as a PID (proportional-integral-differential) control method is widely used. However, the control scheme is to reduce the transient response of the control parameters of the controller to the control object. Therefore, if the control target should change, there is a problem, reset the parameters of the controller again. In this study, without having to reset the parameters of the controller for the parameter variations to be controlled iPID (intelligent PID) using a controller designed to obtain a generator AVR system voltage variation is small in response to full load is applied to and through simulations and experiments improved transient response.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.609-616
• /
• 2019

This paper proposes a design plan of short-term temporary housing for the victims by disaster. Also construction workability and residential environment evaluated by mock-up. In particular, in the event of a disaster, victims have lived the auditorium or gymnasium of the nearby school which is an emergency shelter. However, there was a problem of livability. Therefore, it is the purpose of study to provide temporary housing that resides within 30 days. For this purpose, a composite panel with light weight and insulation select to produce mock-up. The mock-up complete in about an hour. This is because it is made only of the composite panels. The composite panels confirm to be easy to load and construct. And mock-up evaluates insulation and waterproofing performance in the laboratory. As a result, Mock-up has insulation and waterproofing performance. This suggests an alternative to short -term temporary housing.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.263-269
• /
• 2019

In this study, the characteristics and operation of a multi-purpose loader equipped with various sensors such as a sensor capable of measuring the boom length, an angle sensor capable of measuring the tilt of the left and right sides of the boom and the loader, and a load cell capable of measuring the weight during lifting We have implemented a system that displays related data values. The configuration of the system reads the values from the sensors, sends them to the vehicle controller, and transmits the calculated results of the overturn rate and other important information to the display device using the CANOpen protocol. Also, in the calculation of the overturn ratio, the structure of the multi-purpose loader is similar to that of the crane belonging to the heavy equipment, and the crane overturn rate calculation method is used. Through this study, we can observe the condition of the heavy equipment and recognize the emergency situations such as abalone through the display device.

• Journal of the Korea Society for Simulation
• /
• v.18 no.2
• /
• pp.19-27
• /
• 2009

This paper addresses the berth allocation problem in naval ports. Navy vessels need various services such as emergency repair, missile loading, oil supply and many others while commercial vessels only unload and load container at the port. Furthermore, naval vessels have to shift frequently due to a limited capacity of the port. The objective of this paper is to minimize the total number of nesting vessels at the naval port. In other word, the objective is to maximize the total number of naval battleships engaging in the sea. A mixed integer programming(MIP) model is developed and experiments are conducted with ILOG CPLEX 11.0. We compare the computational results of the MIP model to the current scheduling approach by the ROK Navy. The results showed that MIP model performed well by minimizing the number of nesting vessels. and avoiding unnecessary shifts.

• Steel and Composite Structures
• /
• v.48 no.1
• /
• pp.103-111
• /
• 2023

The caving property of top coal is a key factor to the success of top coal caving mining. The influence law of cyclic loading and unloading of hydraulic support on top coal caving is of great significance to improve the recovery rate of top coal. The similar simulation methods were used to study the dynamic evolution of the top coal cracks under the multi-cycle action of the support, and the parameters of top coal cracks were analyzed quantitatively in this paper. The results show that the top coal cracks can be divided into horizontal cracks and vertical cracks under the cyclic loading and unloading of the support. With the increase of the times of the support cycles loading and unloading, the load on the support decreases, the fractal dimension of the cracks increases, the number and total length of the top coal cracks increases, and the top coal caving is getting better. With the increase of the times of multi-cycle loading and unloading, the fractal dimension, total crack length and crack rate of top coal show a trend of rapid increase first and then increase slowly. Both the total length of the top coal cracks and the crack rate basically show linear growth with the change of the fractal dimension. The top coal caving can be well improved and the coal resource recovery rate increased through the multi-cycle loading and unloading.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.137-145
• /
• 2023

In this paper, we propose system access control software that improves the survivability of the naval combat system while maintaining security and stability. The software was improved by improving the operating environment configuration and user authentication process of the system access control software that constitutes the naval combat system, defining the operating environment classification of the naval combat system, and applying a software parallel execution process considering the load rate. Through this, the waiting time required to configure the environment is shortened, providing rapid operation to the operator, and improving the fact that the naval combat system cannot be operated unless the environment configuration is completed even in emergency situations. In order to test the performance, a test environment was created by simulating the existing naval combat system, and the execution time for each operation category was measured and compared. Compared to the existing naval combat system, the execution time of the basic combat system was reduced by about 69.3%, the execution time of the combat system was reduced by about 54.9%, and the execution time of the integrated combat system was confirmed to be reduced by about 8.4%.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.139-145
• /
• 2017

Recently, gusts, typhoon and tsunamis have been occurring more frequently around the world. In such an emergency situation, a moored vessel can be used to predict and analyze other vessel behavior, but if the mooring system is destroyed, marine casualties can occur. Therefore, it is necessary to determine quantitatively whether a vessel should be kept in the harbour or evacuate. In this study, moored ship safety in an exclusive wharf according to swell effects on motion and mooring load have been investigated using numerical simulations. The maximum tension exerted on mooring lines exceeded the Safety Working Load for intervals 12 and 15 seconds. The maximum bollard force also exceeded 35 tons (allowable force) in all evaluation cases. The surge motion criteria result for safe working conditions exceeded 3 meters more than the wave period 12 seconds with a wind speed of 25 knots. As a result, a risk rating matrix (risk category- very high risk, high risk and moderate risk) was developed with reference to major external forces such as wind force, wave height and wave periods to provide criteria for determining the control of capabilities of mooring systems to prevent accidents.