Browse > Article
http://dx.doi.org/10.17703/JCCT.2019.5.3.263

A Study on Realization of Display System for Monitoring of Heavy Equipment State  

Kim, Kee Hwan (Dept. of Electronic Engineering, Semyung Univ)
Publication Information
The Journal of the Convergence on Culture Technology / v.5, no.3, 2019 , pp. 263-269 More about this Journal
Abstract
In this study, the characteristics and operation of a multi-purpose loader equipped with various sensors such as a sensor capable of measuring the boom length, an angle sensor capable of measuring the tilt of the left and right sides of the boom and the loader, and a load cell capable of measuring the weight during lifting We have implemented a system that displays related data values. The configuration of the system reads the values from the sensors, sends them to the vehicle controller, and transmits the calculated results of the overturn rate and other important information to the display device using the CANOpen protocol. Also, in the calculation of the overturn ratio, the structure of the multi-purpose loader is similar to that of the crane belonging to the heavy equipment, and the crane overturn rate calculation method is used. Through this study, we can observe the condition of the heavy equipment and recognize the emergency situations such as abalone through the display device.
Keywords
Multi-purpose Loader; Monitoring System; CANOpen Protocol; Overturn Ratio; Sensors;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Kwon, Cha-Uk, "Development of a Monitoring System Based on the Cooperation of Image and Sensor Information", Daegu Univ. Master's Thesis 2010
2 Chang-Koan Son, Se-Chun Oh, Eui-Ryong Kim, Sin-Ryeong Kim, Young-Gon Kim, "A Study on Automotive Diagnostic System using CAN, CAN FD, FlexRay", JIIBC, Vol.16, No.6 pp. 311-318, 2016 https://doi.org/10.7236/JIIBC.2016.16.6.311   DOI
3 Park, Gun Woo, "A study on the Development of CANopen Protocol using UML", Hanyang Univ. Master's Thesis 2008
4 Pyo, Se-Young, Kim, Kee-Hwan, "A Study on Remote Fault Diagnosis System of Special-purposed Vehicle", JCCT, Vol.4 No.4, 2017 http://dx.doi.org/10.17703/JCCT.2018.4.3.221   DOI
5 Jang, Hyo-Pil, "Compensation of Relation Formula between Luffing Wire Tension and Overturning Moment in a Crawler Crane Considering the Deflection of Boom", Donga Univ. Master's Thesis 2011
6 http://www.das-co.com/
7 https://epec.fi/products/control-system-products
8 Sangbong Park, Daeseung Jeong, "Design and implementation of Serial Communication for IoT Sensing Technology", JCCT, Vol.3 No.3, 2017 http://dx.doi.org/10.17703/JCCT.2017.3.3.27   DOI
9 Joosup Jang, "Type and Using Example of the Special Purpose Vehicle", Auto Journal, Vol.35 No.1, 2013