• 대한치과보철학회지
• /
• 제36권6호
• /
• pp.832-845
• /
• 1998

The purpose of this study was to compare the marginal fit of all ceramic crowns prepared from alumina slip casting, which is consistent with the conventional In-ceram system, and those fabricated from alumina tapes which is currently under development in an effort to alleviate complexities involved in the forming procedure of the In-ceram crown core. All ceramic crowns, made of In-ceram(slip casting) and alumina tapes(Doctor blade casting), were prepared with $90^{\circ}\;and\;135^{\circ}$ shoulder margins. The crowns were cemented with a glass ionomer cement and embeded in epoxy resin. The embedded crowns were sectioned faciolingually and mesiodistally and marginal discrepancies and marginal gaps were measured under the Measurescope MM II. The measurements were analyzed using Wilcoxon rank sum test and Kruskal-Wallis test and the results were as follows: 1. In the case of $90^{\circ}$ shoulder margin, the combined marginal discrepancies and marginal gaps were $78.3{\mu}m\;and\;44.4{\mu}m$ respectively, for the all ceramic crowns fabricated using the alumina tapes. In comparison, the values were $65{\mu}m\;and\;25.5{\mu}m$ for the In-ceram crowns. For the marginal gaps a statistical difference existed (p<0.05) but no significant difference was observed for the marginal discrepancy (p>0.05). 2. In the case of $135^{\circ}$ shoulder margin, the combined marginal discrepancy and marginal gaps were $82.1{\mu}m\;and\;40.2{\mu}m$ respectively, for the all ceramic crowns formed with the tapes. As compared with the marginal discrepancy and gaps of the $90^{\circ}$ shoulder margin in the fabricated from the alumina tapes, no significant statistical differencies were discerned in both cases (p>0.05). 3. There was no statistically significant difference in the fits among four locations around the margins of the all ceramic crowns fabricated using the alumina tapes. The results obtained in this study showed that the marginal fits of the glass infiltrated alumina cores fabricated from the alumina tapes are slightly higher value than those prepared using the In-ceram but the difference is within a clinically acceptable range.

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.55-64
• /
• 1992

This study investigated the effect of porcelain primer on bonding of coomposite resin to porcelain surface. In order to test the bond strength between porcelain and composite resin, porcelain cylinders were embedded in acrylic resin, and polished with 240grit silicone caqrbide paper. The specimens were divided into twelve groups. All specimens were treated with three porcelain primers and bonded with five composite resins. All test groups were stored in $37^{\circ}C$ distilled water for 48hours. Shear bond strengths were measured with Instron(Model 4201) at a cross-head speed of 1mm/min. The obtained results were as follows : 1. Scotchprime/Silux II group and BISCO Porcelain Primer/Bisfill group showed significant higher bond strengths than Clearfil Porcelain Primer/photo Clearfil Bright group(p<0.05). And there was no significant differences in bond strengths between Scotchprime/Silux II group and BISCO Porcelain Primer/Bisfill group(p>0.05). 2. When composite resins were used with Scotchprime, the bond strengths were decresed Silux II$(16.68{\pm}3.35MPa)$, Bisfil$(16.23{\pm}4.54MPa)$, Poly-Fill$(14.74{\pm}4.08MPa)$, Photo Clearfil Bright$(13.75{\pm}2.89MPa)$ and Pekalux$(14.74{\pm}4.08MPa)$ in order, but there was no statistical significance(p>0.05). 3. When composite resins were used with BISCO Porcelain Primer, the bond strength were decreased Bisfil$(16.17{\pm}1.60MPa)$, Silux II$(12.13{\pm}2.37MPa)$, Poly-Fill$(10.78{\pm}1.99MPa)$, Photo Cleafil Bright $(9.91{\pm}4.59MPa)$ and Pekalux$(7.36{\pm}2.16MPa)$ in order, but there was no statistical significance(p>0.05). 4. Silux II, Photo Clearfil Bright and Poly-Fill used with Scotchprime showed significant higher bond strengths than BISCO Porcelain Primer(p>0.05).

• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.23-36
• /
• 1994

Most investigators recommended that porcelain surface should be roughened with abrasives and/or be etched with acid in repairing the fractured porcelain with composite resin. This study was designed to evaluate the effect of porcelain surface treatments on the bond strength between porcelain and composite resin by measuring the shear bond strength and observing the porcelain surface with SEM. 48 porcelain disc were fabricated with Vintage porcelain and embedded in epoxy resin with the test surface exposed. The specimens were divided four groups at random and the test surfaces of the four groups were prepared as follows : Group 1 : Porcelain surface was roughened with a fine diamond and treated with 32% phosphoric acid gel for 10 seconds. Group 2 : Porcelain surface was roughened with a fine diamond and etched with 8% hydrofluoric acid gel for 5 minutes. Group 3 : Porcelain surface was roughened with a coarse diamond and treated with 32% phosphoric acid gel for 10 seconds. Group 4 : Porcelain surface was roughened with a coarse diamond and etched with 8% hydrofluoric acid gel for 5 minutes. All specimens were washed for 30 seconds. A representative specimen of each group was selected and the porcelain surface was observed with SEM at 1000 magnification. Remaining specimens were silanated, bonded with composite resin, thermocycled, and shear-tested on specially designed zig connected to Instron machine. The results were as follows : 1. The shear bond strength of the group etched with hydrofluoric acid was significantly higher than that of group treated with phosphoric acid(p<0.01). 2. The shear bond strength of the group roughened with a fine diamond was not significantly different from that of the group roughened with a coarse diamond(p>0.01). 3. SEM examination of prepared porcelain surfaces revealed that the surface etched with hydrofluoric acid showed numerous microporosities, undercut, and rougher surface than the surface treated with phosphoric acid. 4. All specimens etched with hydrofluoric acid showed cohesive failure within porcelain, but specimens treated with phosphoric acid mainly showed adhesive failure between porcelain and composite resin.

• 대한치과보철학회지
• /
• 제49권1호
• /
• pp.49-56
• /
• 2011

연구 목적: 최근 지르코니아가 전부도재관의 코어로 많이 사용되고 있다. 지르코니아와 레진 시멘트의 결합 강도를 높이기 위한 기계적, 화학적인 표면 처리 방법들이 연구되고 있다. 이 연구에서 여러 표면 처리 방법에 따른 지르코니아와 레진 시멘트의 전단결합강도를 알아보고자 한다. 연구 재료 및 방법: 80개의 지르코니아 (Lava, 3M ESPE, St. Paul, MN, USA) 시편과 80개의 지르코니아/알루미나 복합체 (Zirace, Acucera Co Inc, Korea) 시편을 디스크형태로 제작하여 에폭시레진에 매립하였다. 이들을 각각 4개의 군으로 나누어 $50\;{\mu}m$ $Al_2O_3$ sandblasting, $110\;{\mu}m$ $Al_2O_3$ sandblasting, $50\;{\mu}m$ $Al_2O_3$ sandblasting과 프라이머 (Z-PRIME Plus, Bisco Inc, Schaumburg, IL, USA) 사용, $110\;{\mu}m$ $Al_2O_3$ sandblasting과 프라이머 (Z-PRIME Plus) 사용 군으로 나누었다. 표면 처리한 지르코니아 표면에 2가지 레진 시멘 (Calibra, Panavia F)으로 접착하였다. 그 후 증류수 ($37^{\circ}C$)에 24시간 보관 후 전단 결합 강도 실험을 시행하였고, SEM을 사용하여 표면 처리한 표면과 전단강도 실험 후 파절양상을 관찰하였다. 결과: ANOVA분석에 따르면, 두 가지 종류의 시편 모두에서, 프라이머 (Z-PRIME Plus)를 사용하여 표면 처리한 군들이 전단 결합 강도가 높았다 (P < .05). 결론: 기계적 결합 강도와 함께 새로운 프라이머를 사용하는 것이 지르코니아와 레진 시멘트의 접착 강도를 증가시킨다.

• 대한토목학회논문집
• /
• 제7권3호
• /
• pp.229-240
• /
• 1987

콘크리트의 중성화(中性化)는 일종의 화학적(化學的) 반응(反應)이며, 더우기 혼화재(混和材)로서 플라이애쉬와 고로수쇄(高爐水碎)슬래그를 혼화(混和)한 경우에는 그 반응(反應)매카니즘이 매우 복잡하다. 최근에는 콘크리트의 성능(性能)을 개선(改善)시킬 목적으로 시멘트의 일부를 산업부산물(産業副産物)인 플라이애쉬 및 고로수쇄(高爐水碎)슬래그로 혼화(混和)함으로서 이들에 의한 포졸란반응(反應) 및 잠재수경성(潛在水硬性)에 의해 콘크리트의 중성화(中性化)가 촉진되어 콘크리트 속의 철근이 발창(發錆)될 우려가 있다고 하는 지적이 계속되어 왔다. 본(本) 연구(硏究)에서는 이상과 같은 관점(觀點)으로부터 포졸란반응(反應) 및 잠재수경성(潛在水硬性)이 콘크리트의 중성화(中性化)에 미치는 영향을 분명히 하기 위하여 콘크리트의 배합조건(配合條件)및 수중양생기간(水中養生期間) 등을 변화시켜 자연환경조건(自然環境條件)과 다른 가혹(苛酷) 환경조건하(環境條件下)에서 촉진중성화실험(促進中性化實驗)을 실시하였다. 또한 이들의 결과를 중성화(中性化)의 조기판정(早期判定)이라는 점에 중시(重視)하여 자연환경하(自然環境下)에서 15년간(年間) 옥내(屋內)에 폭로(曝露)시킨 필자(筆者)들의 연구결과(硏究結果)와도 비교(比較) 검토(檢討)를 하여 압축강도(壓縮强度)에 바탕을 둔 새로운 중성화(中性化) 속도식(速度式)을 제안(提案)하였다.

• 대한전자공학회논문지SD
• /
• 제47권3호
• /
• pp.7-17
• /
• 2010

본 논문은 4-트랜지스터 래치 셀을 이용한 저전력향 신개념의 SRAM을 제안한다. 4-트랜지스터 메모리 셀은 종래의 6-트랜지스터 SRAM 셀에서 access 트랜지스터를 제거한 형태로, PMOS 트랜지스터의 소스는 비트라인 쌍에 연결되고 NMOS 트랜지스터의 소스는 두개의 워드라인에 각각 연결된다. 동작시 워드라인에 일정크기의 전압을 인가할 때 비트라인에 흐르는 전류를 감지하여 읽기동작을 수행하고, 비트라인 쌍에 전압차이를 두고 워드라인에 일정크기의 전압을 인가하여 쓰기동작을 수행한다. 이는 공급전압 보다 낮은 소신호 전압으로 워드라인과 비트라인을 구동하여 메모리 셀의 데이터를 저장하고 읽어낼 수 있어서 동작 소비전력이 적다. 아울러 셀 누셀전류 경로의 감소로 인해 대기 소모전력 또한 개선되는 장점이 있다. 0.18-${\mu}m$ CMOS 공정으로 1.8-V, 16-kbit SRAM test chip을 제작하여 제안한 회로기술을 검증하였고, 칩 면적은 $0.2156\;mm^2$이며 access 속도는 17.5 ns 이다. 동일한 환경에서 구현한 종래의 6-트랜지스터 SRAM과 비교하여 읽기동작시 30% 쓰기동작시 42% 동작소비전력이 적고, 대기전력 또한 64% 적게 소비함을 관찰하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권8호
• /
• pp.3773-3778
• /
• 2014

Background: The study was aimed to evaluate the prevalence and genotype distribution of HPV infection in vulvar squamous cell carcinoma (SCC) in northern Thailand and the clinicopathological difference with regard to HPV infection status. Materials and Methods: Formalin-fixed paraffin-embedded tissue samples of vulvar SCC diagnosed between January 2006 and December 2012 were collected. HPV infection was detected by nested polymerase chain reaction (PCR) with primers MY09/11 and GP5+/6+. HPV genotyping was performed using the Linear Array Genotyping Test, followed by type-specific PCR targeting the E6/E7 region of HPV16/18/52 if the Linear Array test was negative. The histologic slides of vulvar lesions and the medical records were reviewed. Results: There were 47 cases of vulvar SCC included in the study (mean patient age $57.9{\pm}13.2$ years). HPV infection was detected in 29 cases (62%), all of which had single HPV infections. HPV16 accounted for 23 (49%). The patients with HPV-positive SCC had a significantly younger mean age than those with HPV-negative tumors (52.7 years vs 66.2 years, p<0.001). There was no significant difference in tumor stage distribution with regard to the status of HPV infection. The presence of vulvar intraepithelial neoplasia (VIN) of usual type (basaloid or warty) was significantly more frequent in HPV-positive cases compared with HPV-negative cases (62% vs 6%, p<0.001), whereas differentiated-type VIN was more common in HPV-negative cases (24% vs 0%, p=0.019). Conclusions: HPV infection was detected in 62% of vulvar SCC in northern Thailand. HPV16 was the predominant genotype similar to the data reported from other regions. HPV-positive SCC occurred in younger patients compared with HPV-negative SCC, and was associated with usual-type VIN. Vaccination against HPV16/18 may potentially prevent almost one half of vulvar SCC in northern Thailand.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권5호
• /
• pp.1943-1948
• /
• 2012

Introduction: Prostate cancer in Indonesia is the $3^{rd}$ ranking cancer among males and the $5^{th}$ rank for their cancer mortality. Prognostic markers that can identify aggressive prostate cancer in early stages and help select appropriate therapy to finally reduce the mortality are therefore urgently needed. It has been suggested that stem cells in the prostate gland have a role in initiation, progression, and metastasis of cancer, although controversy continues to exist. Maintenance of normal stem cell or reserve cell populations in several epithelia including prostate has been shown to be regulated by p63 and alteration of p63 expression is considered to have an oncogenic role in prostate cancer. We hypothesize that the expression of cytoplasmic aberrance of p63 is associated with high ALDH1A1 expression as a cancer stem cell marker, thus leading to progression of prostate cancer. Methods: Using a cross-sectional study during two years (2009-2010), a total of 79 paraffin embedded tissues of benign prostatic hyperplasia, PIN prostatic intraepithelial neoplasia, low and high Gleason score prostate cancer were investigated using immunohistochemistry. Associations between cytoplasmic p63 and ALDH1A1, as well as with pathological diagnosis, were analyzed by Chi-Square test using SPSS 15.0. Links of both markers with cell proliferation rate (KI-67) and apoptotic rate (cleaved caspase 3) were also analyzed by Kruskal-Wallis test. Results: The mean age of patient at the diagnosis is 70.0 years. Cytoplasmic aberrance of p63 was associated with ALDH1A1 expression (p<0.001) and both were found to have significant relationships with pathological diagnosis (including Gleason score), (p=0.006 and p<0.001 respectively). Moreover, it was also found that higher levels of cytoplasmic p63 were significantly associated with the frequency of proliferating cells and cells undergoing apoptosis in prostate cancers (p=0.001 and p=0.016 respectively). Conclusion: p63 cytoplasmic aberrance is associated with high ALDH1A1 expression. These components are suggested to have an important role in prostate cancer progression and may be used as molecular markers.

• 유통과학연구
• /
• 제14권7호
• /
• pp.71-81
• /
• 2016

Purpose - Because creativity, which is an intangible resource embedded within the company, can offer a competitive advantage, most companies have an interest in promoting creativity among their employees and division(e.g., marketing organization). Creativity renders a sustainable competitive advantage to a firm because it is a strategic resource that is valuable, flexible, rare, and imperfectly imitable or substitutable. Although most companies broadly recognize the importance of creativity, the methods for developing creativity remain elusive. Therefore, the present study investigates how to structure incentives to motivate employees to be more creative and how to develop tools to facilitate creativity. In detail, the present study aimed to examine the relationship between the regulatory focus of marketing organizations(e.g., promotion focus vs prevention focus) and creativity of marketing organizations. In addition, the present study set out to examine the moderating role of interaction of financial reward and creative training in addition to investigating the direct relationship between creativity and regulatory focus in New Product Development(NPD) context. Research design, data, and methodology - The data used to test the hypotheses are drawn from a survey of full time NPD project members(including project manager, designer, engineer, and marketer). The present study utilized data obtained mainly from a database compiled by the Korea Investors Service-Financial Analysis System which provides comprehensive corporate and financial information on firms listed on the Korea Stock Exchange. A study population comprising 1,000 South Korean firms was obtained from this database. We selected 864 firms from the database, and the firms have experiences of new product development project. We collected a total of 162 responses, for a 18.8% response rate. After we excluded 14 questionnaire because of incomplete responses, a total of 148 questionnaire remained(final response rate: 17.1%). Working with a sample of 148 responses in South Korea, hierarchical moderated regression is employed to test research hypotheses(

The relationship between promotion focus and creativity of marketing organization,

The relationship between prevention focus and creativity of marketing organization,

The moderating effect of joint influences(interaction between financial rewards and creativity training) on the relationship between promotion focus creativity of marketing organization,

The moderating effect of joint influences(interaction between financial rewards and creativity training) on the relationship between prevention focus creativity of marketing organization). SPSS 18.0 and AMOS software were used in the data analysis. Results - The empirical study confirmed that promotion focus of marketing organization is positively related to creativity of marketing organization. Also, prevention focus of marketing organization is positively affected to creativity of marketing organization. In addition, the interaction between financial rewards and creativity training moderated the relationship between regularity focus(e.g.), promotion focus vs prevention focus) and creativity of marketing organization. These results suggest that managers can improve the performances of their creative efforts by providing the use of financial rewards and creativity training in combination. Conclusion - Based on results of this study that examine the effects of regulatory focused creative efforts on creativity of marketing organization, promotion focus is helpful with marketing organizations to enhance their service innovation and performance. Prevention focused organization should allow monetary rewards and creativity training to increase their creativity for innovation of new products.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.118-125
• /
• 2017

본 논문은 FRP Hybrid Bar의 최적 부착 성능 도출을 위한 실험 결과를 나타낸다. FRP Hybrid Bar는 이형 철근의 부식문제를 해결하기 위하여 이형 철근 외측에 유리섬유를 감싸 만들어졌다. 콘크리트와의 부착 성능 향상을 위해 매끈한 FRP Hybrid Bar 표면에 수지와 규사를 이용하여 코팅하였고 수지의 종류 및 점도, 그리고 규사의 크기를 실험 변수로 하여 FRP Hybrid Bar의 부착 성능을 실험적으로 평가하였다. FRP Hybrid Bar의 부착 성능 평가를 위해 한 변의 길이가 200 mm인 정육면체 콘크리트 블록에 FRP Hybrid Bar를 매립하였고, 인발 실험을 통하여 FRP Hybrid Bar와 콘크리트의 계면에서의 최대 하중과 슬립을 측정하였다. 실험 결과로부터, 각 실험 변수에 따른 최대 하중 및 부착 강도를 산정하였고 FRP Hybrid Bar의 부착 성능이 가장 우수한 수지 종류 및 점도, 그리고 규사 크기를 도출하였다. 에폭시 수지와 5호 규사를 사용한 실험체의 최대부착강도는 이형철근의 최대부착강도 대비 약 35% 정도 증가되었다.