• Journal of the Korean GEO-environmental Society
• /
• v.17 no.9
• /
• pp.5-12
• /
• 2016

Numerical analyses were carried out to simulate tilting control on the suction pile for offshore wind power embedded into cohesive soil and cohesionless soil using finite element software, ABAQUS. A 3-dimensional suction pile was modelled as a wished-in-place pile with $1^{\circ}$ tilted from vertical line. The inner room of suction pile was divided into 3 separate rooms for tilting control, and point load was applied to the center of gravity of a separate room to restore the original position of the suction pile. From numerical analyses, required suction pressure was obtained for desired tilting degree, and the maximum/minimum principle stresses of concrete skirt and the Mises stresses of inner steel wall were collected at original position. It was found that the required suction pressure was about 410 kPa for cohesive soil, and about 1,800 kPa for cohesionless soil.; likewise, obtained stresses were greater for cohesionless soil than cohesive soil.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.231.1-231.1
• /
• 2015

Surface energy, being an important material parameter to control its interactions with the other surfaces plays a key role in bio-related application. Carbon films are found very promising due to their characteristics such as wear and corrosion resistant, high hardness, inert, low resistivity and biocompatibility. The present work deals with the deposition of carbon films using unbalanced facing target magnetron sputtering technique. The discharge characteristics were studied using optical emission spectroscopy and correlated with the film properties. Surface energy was investigated through contact angle measurement. The ID/IG ratio as calculated from Raman spectroscopy data increases with the increase in power density due to the higher number of sp2 clusters embedded in the amorphous matrix. The deposited films were smooth and homogeneous as observed by Atomic force microscopy having RMS roughness in the range of 1.74 to 2.25 nm. It is observed that electrical resistivity and surface energy varies in direct proportionality with operating pressure and has inverse relation with power density. The surface energy results clearly exhibited that these films can have promising applications in cell cultivation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5904-5927
• /
• 2019

Many artificial intelligence (AI) techniques have been embedded into various engineering technologies to assist them in achieving different goals. The integration of modern technologies with energy consumption management system and occupant's comfort inside buildings results in the introduction of intelligent building concept. The major aim of this integration is to manage the energy consumption effectively and keeping the occupant satisfied with the internal environment of the building. The last few couple of years have seen many applications of AI techniques for optimizing the energy consumption with maximizing the user comfort in smart buildings but still there is much room for improvement in this area. In this paper, a hybrid of two AI algorithms called firefly algorithm (FA) and genetic algorithm (GA) has been used for user comfort maximization with minimum energy consumption inside smart building. A complete user friendly system with data from various sensors, user, processes, power control system and different actuators is developed in this work for reducing power consumption and increase the user comfort. The inputs of optimization algorithms are illumination, temperature and air quality sensors' data and the user set parameters whereas the outputs of the optimization algorithms are optimized parameters. These optimized parameters are the inputs of different fuzzy controllers which change the status of different actuators according to user satisfaction.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3327-3334
• /
• 2021

Present electric grids are advanced to integrate smart grids, distributed resources, high-speed sensing and control, and other advanced metering technologies. Cybersecurity is one of the challenges of the smart grid and nuclear plant digital system. It affects the advanced metering infrastructure (AMI), for grid data communication and controls the information in real-time. The research article is emphasized solving the nuclear and smart grid hardware security issues with the integration of field programmable gate array (FPGA), and implementing the latest Time Authenticated Cryptographic Identity Transmission (TACIT) cryptographic algorithm in the chip. The cryptographic-based encryption and decryption approach can be used for a smart grid distribution system embedding with FPGA hardware. The chip design is carried in Xilinx ISE 14.7 and synthesized on Virtex-5 FPGA hardware. The state of the art of work is that the algorithm is implemented on FPGA hardware that provides the scalable design with different key sizes, and its integration enhances the grid hardware security and switching. It has been reported by similar state-of-the-art approaches, that the algorithm was limited in software, not implemented in a hardware chip. The main finding of the research work is that the design predicts the utilization of hardware parameters such as slices, LUTs, flip-flops, memory, input/output blocks, and timing information for Virtex-5 FPGA synthesis before the chip fabrication. The information is extracted for 8-bit to 128-bit key and grid data with initial parameters. TACIT security chip supports 400 MHz frequency for 128-bit key. The research work is an effort to provide the solution for the industries working towards embedded hardware security for the smart grid, power plants, and nuclear applications.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.369-377
• /
• 2008

Today, Ethernet technology is rapidly developing to have a bandwidth of 10Gbps beyond 1Gbps. In such high-speed networks, the existing method that host CPU processes TCP/IP in the operating system causes numerous overheads. As a result of the overheads, user applications cannot get the enough computing power from the host CPU. To solve this problem, the TCP/IP Offload Engine(TOE) technology was emerged. TOE is a specialized NIC which processes the TCP/IP instead of the host CPU. In this paper, we implemented a high-performance, lightweight TCP/IP(HL-TCP) for the TOE and applied it to an embedded system. The HL-TCP supports existing fundamental TCP/IP functions; flow control, congestion control, retransmission, delayed ACK, processing out-of-order packets. And it was implemented to utilize Ethernet MAC's hardware features such as TCP segmentation offload(TSO), checksum offload(CSO) and interrupt coalescing. Also we eliminated the copy overhead from the host memory to the NIC memory when sending data and we implemented an efficient DMA mechanism for the TCP retransmission. The TOE using the HL-TCP has the CPU utilization of less than 6% and the bandwidth of 453Mbps.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.19-26
• /
• 2013

This paper propose a surface EMG signal based gait phase recognition method that selects features and channels adaptively. The proposed method can be used to control powered artificial prosthetic for lower limb amputees and can reduce overhead in real-time pattern recognition by selecting adaptive channels and features in an embedded device. The method can enhance the classification accuracy by adaptively selecting channels and features based on sensitivity and specificity of each subject because EMG signal patterns may vary according to subject's locomotion convention. In the experiments, we found that the muscles with highest recognition rate are different between human subjects. The results also show that the average accuracy of the proposed method is about 91% whereas those of existing methods using all channels and/or features is about 50%. Therefore we assure that sEMG signal based gait phase recognition using small number of adaptive muscles and corresponding features can be applied to control powered artificial prosthetic for lower limb amputees.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1873-1878
• /
• 2017

Recently, many researches have been conducted on the aviation industry to replace the wire harness cable between the avionics of the aircraft with the wireless network. In this paper, we present an Event-Based Simulator for Wireless Avionics Intra-Communications (ES-WAIC) that can verify core technologies of wireless networks and efficiently integrate different layers of the network. ES-WAIC is developed to enhance the readability between the real time control application developers of the higher layer and the network layer developers. Specifically, the practical implement relies on an event-based programming concept to increase portability and compatibility that can be applied to the realistic low-power wireless embedded networks. ES-WAIC implements the overall system layers including the wireless channel modeling of the 4.4GHz band, the physical layer, the medium access control, the network, and the application layer of wireless avionics intra-communications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1185-1191
• /
• 2014

An integrated ship area network has functionality of remote control and autonomous management of various sensors and instruments embedded or boarded in a ship. For such environment, a wireless bridge is essential to transmit control and/or managing information to sensors or instruments from a central integrated ship area network station. In this paper, one of reliable schemes of In-ship sensor networks using a Grid-based WPAN is proposed. The proposed scheme is based on a novel grid network which allows a multi-path communication, and is robust, energy efficient. The results demonstrate that the proposed Grid-based WPAN outperforms the IEEE 802.15.4 based network in terms of success ratio and power efficiency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1108-1111
• /
• 2009

Auto Pilot is the system which move automatically the vessel through locating operation mode to automatic after entering operating course using a electronic chart or plotter. And water jet is the a propulsion system that make a power to push the vessel through spouting the accelerated water which is absorbed by the hole in the bottom of vessel. The water jet receive the effect of the depth of water lowly, it's acceleration efficiency is higher under high speed and have an advantage on vibrating and floating sound, so it's demand is increasing as new propulsion system. However, the signal systems of auto pilot and water jet are different, we need the system to interface between each system. We designed the interface that efficiently digital feed back control embedded module between auto pilot and water jet system in this paper.

• The Southeast Asian review
• /
• v.28 no.4
• /
• pp.161-196
• /
• 2018

The major object of this study is to analyze the political development of Myanmar's civilian government on the concept of defective democracy, and to investigate the main actors who delayed or stymied political development and their interrelation. In doing so, this study suggests the tasks required for political development overcoming the current political structure and behavior. The civilian government, which was launched in 2016, failed to achieve positive political development by following the behavior of military authoritarianism in terms of exercise of power and decision making structure. On the perspective of the government, delegative democracy and domain democracy have been strengthening since one person has taken over all political power and hesitate to take horizontal accountability for each power organizations. The military, which is responsible for national defence and security seeks illiberal democracy and exclusive democracy, keeping on an undemocratic constitution by the military and Burman ethnocentrism. The reasons why defective democracy has been occurred are that the lack of a group to run a democratic institutions and the limitation of power structure that fails to adhere to the principle of civilian control to the military due to long-term military rule. Therefore, there is a need for military's come back to barracks and transform the power structure to democratic of the civilian government which is tamed an authoritarian order for the political development in Myanmar. In order to achieve this, this study concludes that setting up a empowered democratic government is required.