• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.2
• /
• pp.89-96
• /
• 2017

We develop an embedded system to measure various sensor data, control multiple motors, and communicate with mobile devices for system managements. Choosing TI AM3359 microprocessor featuring high processing performance, low power consumption, and various I/O device support, we design and build the embedded system hardware so that it supports multiple global positioning system (GPS) and gyro sensor modules to measure precise position; multiple pulse width modulation (PWM) outputs to control multiple direct current (DC) motors; a Bluetooth module to communicate with mobile devices. Then, we port the boot loader and device drivers to the built circuit board and construct the firmware development environment for the application programming. The performance of the designed and implemented embedded system is demonstrated by real motor control test using GPS and gyro sensor data and control parameters configured by a mobile device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.809-812
• /
• 2013

This paper realize power control embedded system with one master of Core-A 32-bit RISC processor and several slaves controling power with synchronized digital signals. Core-A platform provided by Dynalith Systems consists of Core-A processor, AMBA bus, SSRAM, AC97, DMA, UART, GPIO etc. Slave is made by both digital part and analog part. The former generates various power control patterns synchronized with master signal. The latter converts 220V power proportional to 4 bit digital signals. Design of Embedded system is executed in Flowrian2 of System Centroid Inc., in which software is cross-compiled and hardware is verified by simulation. Embedded system is implemented in FPGA board and CPLD chips as well as PCB board for analog power control.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.538-541
• /
• 1998

This paper describes the development of 5.15ns 32kb asynchronous CMOS SRAM using 0.6.mu.m CMOS technology. The proposed high speed embedded SRAM is realized with optimized control circuit and sense amplifier at a power supply of 3V. Using proposed control circuit, the delay time from address input to wordline 'on' is reduced by 33% and mismatch-insensitive sense amplifier can sense a small difference of bit-line voltage fast and stably.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1976-1981
• /
• 2003

Except a desktop computer and workstation, an embedded system is a system containing microprocessors. While a desktop computer and a workstation are designed for a general purpose, an embedded system is designed for a dedicated purpose. Thus, an embedded system must meet some constraints such as low power consumption, low cost, small size, real-time, or user-defined ones. A simple and low cost embedded system may be able to be designed without using embedded operating systems (OS). However, considered design time and effort, some embedded system had better be designed with using embedded OS. Under given constraints and purpose of some embedded systems, one embedded OS can save more time, cost, and effort in designing those embedded systems than others. This paper compares four embedded OSs, Windows CE, Embedded Linux, pSOS, and uC/OS. It analyzes several issues of embedded OS such as process scheduling, inter-process communication (IPC), memory management, and network support. Also, it describes the product of each embedded OS.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2578-2580
• /
• 1999

In this paper, an embedded micro processor based resistance spot welding controller is introduced which has been recently developed by Hyosung Co. Ltd. The performance of rapid and constant high current control is tested experimentally. This paper shows configurations of measuring system for high current and realtime RMS conversion techniques of sampled discrete data. A digital proportional control is adopted for this system and the result shows that this new product is working well at wide range of welding current and the performance is improved compared with some other commercially available controllers that are widely used in our industries. User friendly MMI system and a computer network system to monitor each welding processes are also presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2343-2350
• /
• 2010

In this paper, new smart switch that can monitor and control the power consumption and standby power in real-time by implementing an embedded web-server is proposed. The proposed switch can perform the following functions: measuring the electric power like commercial smart meter product, monitoring the power consumption in real-time in distant places through wire and wireless devices, and finally controlling ON/OFF of each switch. In addition, it also contains auto power-shutoff functions for standy power, overvoltage and overcurrent just like existing power-saving outlet and mulitap. Finally, the proposed smart switch has lower hardware and power consumption than the existing products and can be commercialized as a small-sized product by using exclusive embedded web-server of its own, rather than using PC for monitoring and remote control.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.754-757
• /
• 2003

The implementation of home network systems In ubiquitous computing environments requires middleware that provides a method to control and operate home appliance devices. The Universal Plug and Play (UPnP), which is based on the IPv4 protocol and running on a PC, consists of UPnP devices that provide relevant services and control points that control the devices. However, It is inappropriate to Implement UPnP devices on a PC, since the implementation on a PC requires much space and electrical power. In this paper, a small embedded home network device equipped with UPnP middleware is implemented on an embedded GNU/Linux system running on an ARM9 platform, in order to deal with such problems.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.4
• /
• pp.306-314
• /
• 2012

In case of the conventional DC-AC inverter using two DC-DC converters with unipolar output capacitor voltages, for generating the AC output voltage, the output capacitor voltages of its each DC-DC converter must be higher than the DC input voltage. To solve this problem, this paper proposes a single-phase DC-AC inverter using two embedded Z-source converters with bipolar output capacitor voltages. The proposed inverter is composed of two embedded Z-source converters with common DC source and output AC load. The AC output voltage is obtained by the difference of the output capacitor voltages of each converter. Though the output capacitor voltage of converter is relatively low compared to the conventional method, it can be obtained the same AC output voltage. Moreover, by controlling asymmetrically the output capacitor voltage, the AC output voltage of the proposed system is higher than the DC input voltage. To verify the validity of the proposed system, a DSP(TMS320F28335) based single-phase embedded Z-source DC-AC inverter was made and the PSIM simulation was performed under the condition of the DC source 38V. As controlled symmetrically and asymmetrically the output capacitor voltages of each converter, the proposed inverter could produce the AC output voltage with sinusoidal waveform. Particularly, in case of asymmetric control, a higher AC output voltage was obtained. Finally, the efficiency of the proposed system was measured as 95% and 97% respectively in case of symmetric and asymmetric control.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.150-152
• /
• 2004

The battery charge/discharge process, the final step of the secondary battery production process, requires real-time precision controls for improving both lifetime and performance of the battery cell. In this paper, we present embedded system design for precision control of the secondary battery charge/discharge production process using low power embedded processor based on embedded linux. This system receive charge/discharge command from the main server through ethernet. Compared to existing charge/discharge control system, our design makes low cost and precision control system possible.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.592-595
• /
• 2003

In this paper, we have designed a Home Networking System using an embedded linux board. The system based on the World-Wide-Web is composed of three parts - a Server, a Client and a Simulator. The Home Networking Server is built in an embedded board using an embedded linux kernel. A web-server and Home Networking Server Seryice Demon programming with a Jaya-Language is included in the board. Clients can connect to the server board using a web-browser in the desktop computer, PDA or any other machines which include a web-browser. For this purpose, we made the client program using a Java-Applet. So, the clients who connect to the server for the control of the applications, download the class-file and execute the client-program in the web-browser. So, the clients don't need any other programs to control the applications from a remote place. The size of server board is very small (86.3$\times$74mm), which makes it very useful not only for the Home-Networking-System but also in many other fields, e.g., embedded robot control system, etc. Using an embedded board instead of a desktop computer is good for a simple network environment and it occupies only a small space to make the system.