• 한국안전학회지
• /
• 제11권2호
• /
• pp.109-115
• /
• 1996

The movement of water through a river embankment and its influenced upon the stability of the slope of the embankment are described. The stability of the embankment is depended upon the location of seepage line. As the seepage flow occurs in the embankment, the slope of the embankment loses its stability. Of particular interest is the stability following a rapid change of water level. The variation of seepage line in the embankment model by a fluctuation of water level is discussed. The experimental models were construction with slopes of 1 : 1.5, 1 : 2.0, 1 : 2.5 and the flow velocity was turned from 60cm/sec~90cm/sec. Based on the experimental study, the following conclusions are drawn. 1) When water level is raised, the seepage line of downstream slope Is raised rapidly as flow velocity increases. 2) For the case of permeable layer, the seepage line raised rapidly as compare with impermeable layer when water lever is raised.

• 한국항만학회지
• /
• 제14권2호
• /
• pp.233-239
• /
• 2000

The expansion of old road is needed in constructing the entrance at the $\bigcirc$$\bigcirc$I/C road in $\bigcirc$$\bigcirc$city. To strength the national competition, many agents who concerned do their best for finishing that construction early as soon as possible. In generally, soil embankment on soft foundation is caused to reduce the stability by making the settlement of ground surface due to the over load. Thus, we try to make it stable by building EPS embankment construction which in our working place is one kind of the method of light embankment construction after excavating the original ground.

• 한국안전학회지
• /
• 제22권4호
• /
• pp.57-65
• /
• 2007

Effects on the stiffness of the embankment and sandmat on the construction safety of road embankment was investigated in this study by the numerical experiments using FEM. Two points was mainly focused in this study especially. First the deformation characteristics by the change of the stiffness of sand mat and embankment was investigated by the analyzing the consolidation settlement at the center of the embankment and the lateral displacement at the toe of the embankment. And, the effect of the stiffness on the stress distribution characteristics was also investigated in this study. Furthermore, slope stability analysis was carried out to gain the safe factor by change the stiffness of the sandmat and the embankment. The objective of the study is supplying the result of the numerical experiments for the geotechnical engineers who use the FEM for the safety design of the soil structures. As a result, the stiffness of the superstructures greatly affects on the deformation characteristics both in consolidation settlement and lateral displacement. However, it can be aware that it is not dominants to the stress distribution in the aspect that the no changes in the residual excess pore water pressure. Therefore, the decision of the stiffness has to be carried out deliberately considering not only the consolidation the magnitude of the settlement and the lateral displacement, but the slope stability.

• 한국재난관리표준학회지
• /
• 제1권4호
• /
• pp.65-71
• /
• 2008

본 논문은 국지성 호우에 따른 성토사변의 내부 침식의 특성에 대한 것이다. 기존 성토재료의 필터조건 분석방법에 대하여 검토하였다. 근접 성토재료로부터 재료업자의 이동을 억제하기 위한 필터층의 조건을 이론적 배경을 기초로 새로운 분석법을 제안하였다. 이러한 필터거동에 대한 새로운 분석기법에 따라 성토재료 내 침식에 의한 입자간의 거동 특성을 규명하기 위하여 사면의 내부 침식에 영향을 주는 주요원인인자(강우강도, 사면구배, 성토재료 특성 등)를 변화하여 총 3가지 Case의 축소모형실험을 실시하였다. 본 연구로부터 새로운 필터조건 분석법이 실질적인 성토구배 내의 성토재료에 대한 필터 설계시보다 더 적용성이 높은 방법이라는 결론을 얻었다. 이에 따라 새로운 필터조건검토 기준 또는 방법을 제안하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1988년도 학술세미나 강연집
• /
• pp.3-67
• /
• 1988

Model studies on the response of homgeneous earth embankment dams subjected to strike-slip fault movement have been penomed via centrifuge and finite element analysis. The centrifuge model tests have shown that crack development in earth embankment experiences two major patters: shear failure deep inside the embankment and tension failure near the surface. The shear rupture zone develops from the base level and propagates upward continuously in the transverse direction but allows no open leakage chnnel. The open tensile cracks develop near the surface of the embankment, but they disappear deep in the embankment. The functional relationship has been developed based on the results of the centrifuge model tests incorporating tile variables of amount of fault movement, embankment geometry, and crack propagation extent in earth des. This set of information can be used as a guide line to evaluate a "transient" safety of the duaged embankment subjected to strike-slip fault movement. The finite element analysis has supplemented the additional expluations on crack development behavior identified from the results of the centrifuge model tests. The bounding surface time-independent plasticity soil model was employed in the numerical analysis. Due to the assumption of continuum in the current version of the 3-D FEM code, the prediction of the soil structure response beyond the failure condition was not quantitatively accurate. However, the fundamental mechanism of crack development was qualitatively evaluated based on the stress analysis for the deformed soil elements of the damaged earth embankment. The tensile failure zone is identified when the minor principal stress of the deformed soil elements less than zero. The shear failure zone is identified when the stress state of the deformed soil elements is at the point where the critical state line intersects the bounding surface.g surface.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.152-160
• /
• 2010

In this study, cohesion of soft ground, soft ground depth and embankment height varying conditions, such as the impact of each condition after the calculation of the range, SCP was performed to evaluate the applicability of the method. Reinforcing effects of scope, and permit lateral movement of SCP 2D and 3D analysis of the program were calculated by the displacement ratio, the result follows. The height and depth of soft soil embankment with increasing and decreasing the cohesion tends to be affected were long range, SCP method applied by the finite element analysis Cu = 1.0tf/$m^2$, embankment height is 3.0m depth of soft soil can be applied in a less than 5.0m, and Cu = 3.0tf/$m^2$, embankment height, the soft soil depth is 3.0m 12.0m, Cu = 3.0tf/$m^2$, embankment height is 5.0m less than 7.0m depth of soft soil can be applied in was. And Cu = 5.0tf/$m^2$, embankment height is 3.0m below 15.0m depth rouge anti Floor, Cu = 3.0tf/$m^2$, embankment height of 5.0m 12.0m depth below the soft soil, Cu = 5.0tf/$m^2$, If the depth of soft soil embankment height of 7.0m and below 5.0m was applicable.

• 한국지반신소재학회논문집
• /
• 제10권1호
• /
• pp.43-51
• /
• 2011

연약 점성토 지반에 성토를 할 경우 과도한 침하와 측방유동으로 인한 피해를 최소화하기 위해 토목섬유/성토지지말뚝공법이 주로 사용되고 있다. 본 공법은 연약지반 층을 관통하여 지지층에 관입시킴으로써 상재하중을 지지하게 하여 상재하중으로 인한 침하와 측방유동 발생을 최소화한다. 본 연구에서는 연약 점성토 지반에 설치된 토목섬유/성토지지말뚝공법의 보강효과를 정량적으로 검토함을 목적으로 하였다. 실내모형실험을 통하여 무보강 및 성토지지말뚝 보강의 경우에 대한 지반 거동을 재현하고 성토지지말뚝에 의한 측방유동 억지효과를 분석하였다. 이때 성토지지말뚝을 설치한 경우에 대해서는 상재하중의 크기를 다르게 설정하여 완속 재하와 급속 재하의 경우에 대한 측방유동의 억지효과를 분석하였다.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.457-462
• /
• 2007

콘크리트궤도는 최근 국내에 활발히 적용되고 있다. 콘크리트궤도는 유지보수 비용 저감을 꽤할 수 있다는 장점이 있으나, 콘크리트궤도 구축 후 토공에서 발생할 수 있는 침하를 허용범위 이내로 관리하는 것은 쉽지 않다. 따라서 궤도 공사 이전에 토공 침하를 측정하고 평가하는 것은 매우 중요하다. 원지반과 성토체에서의 침하 거동을 평가하기 위하여 1개의 원지반 침하판, 1개의 하부노반 침하판, 5개의 지표침하핀을 설치하여 성토 완료 후 1년 이상 동안 계측을 수행하였다. 시험개소의 경우 원지반 침하는 시공 중에 완료된 것으로 평가되었다. 그러나 성토체 침하는 성토 완료 후에도 지속적으로 발생하고 있으며, 침하 속도는 점진적으로 감소되는 것을 확인할 수 있었다. 본 논문에서는 침하급증 원인을 분석하여 강우가 침하 급증의 주요원인 중의 하나인 것을 확인하였다.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.158-167
• /
• 1999

In parallel flow condition, to estimate the stability of the extended embankment constructed on a permeable foundation ground, a laboratory model test was performed due to extended materials and water level increasing velocity of a flood period. A laboratory model test was peformed for different permeability coefficients ($K_1=2.0{\times}10^{-5}cm/sec,\;K_2=1.5{\times}10^{-4}cm/sec,\;K_3=2.3{\times}10^{-3}cm/sec$) using seepage. The fluctuation of water level occurring to an extended embankment was analyzed by laboratory model tests as vary the increasing velocity of water level with 0.6cm/min, 1.2cm/min, 2.4cm/min respectively. In analysis results, the increase of water level into embankment occurs rapidly because seepage water moving along with a permeable soil flow into embankment. The larger the permeability coefficient of an extended part is the longer initial seepage distance, and the exit point of downstream slope is gradually increased and then shows unstable seepage behavior as occurring partial collapse. As the increasing velocity of water level increase, the initial seepage line is formed low, and the discharge increases. Therefore, the embankment extended by a lower permeable soil than existing embankment shows stable seepage behavior because an existing embankment plays a role as filter for an extended part.

• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.579-593
• /
• 2017

Geosynthetic reinforced soil retaining walls can be employed as railway embankments to carry large static and dynamic train loads, but very few studies can be found in the literature that investigate their dynamic behavior under simulated wheel loading. A large-scale dynamic test on a reinforced soil railway embankment was therefore carried out. The model embankment was 1.65 meter high and designed to have a soilbag facing. It was reinforced with HDPE geogrid layers at a vertical spacing of 0.3 m and a length of 2 m. The dynamic test consisted of 1.2 million cycles of harmonic dynamic loading with three different load levels and four different exciting frequencies. Before the dynamic loading test, a static test was also carried out to understand the general behavior of the embankment behavior. The study indicated the importance of loading frequency on the dynamic response of reinforced soil railway embankment. It also showed that toe resistance played a significant role in the dynamic behavior of the embankment. Some limitations of the test were also discussed.