• Steel and Composite Structures
• /
• 제43권6호
• /
• pp.759-772
• /
• 2022

Concrete-filled double skinned steel tubular (CFDST) columns have been used to construct modern structures such as tall buildings and bridges as well as infrastructures as they provide better, lesser weight, and greater stiffness in structural performance than conventional reinforced concrete or steel members. Different shapes of CFDST columns may be needed to satisfy the architectural and aesthetic criteria. In the study, three-dimensional FE simulations of circular and elliptical CFDST columns under axial compression were developed and verified through the experimental test data from the perspectives of full load-displacement histories, ultimate axial strengths, and failure modes. The verified FE models were used to investigate and compare the structural performance of CFDST columns with circular and elliptical cross-section shapes by evaluating the overall load-deformation curves, interaction stress-deformation responses, and composite actions of the column. At last, the accuracy of available design models in predicting the ultimate axial strengths of CFST columns were investigated. Research results showed that circular and elliptical CFDST column behaviors were generally similar. The overall structural performance of circular CFDST columns was relatively improved compared to the elliptical CFDST column.

• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.249-261
• /
• 2022

This paper presents a numerical study to develop a guideline for estimating the plastic strength of elliptical steel slit damper with reasonable accuracy. The strut width increases from middle to end in elliptical steel slit damper and it is observed from the past studies that variation of the width is not considered for calculating the plastic strength of the damper. It is also noticed that the existing formulas for predicting plastic strength of this kind of damper may not be accurate and further refinement is warranted. Study is then carried on elliptical steel slit damper made of mild steel and having different geometry to find out equivalency of it with oblong steel slit damper having similar plastic strength. A few three-dimensional finite element models of seismic moment connection system with steel slit damper are developed and validated against past experiments for carrying the present study considering both the material nonlinearity as well as geometric nonlinearity. The results of the parametric studies have been compared with energy quantities and presented graphically to better understand the effects of different parameters on the system. Based on the pattern of parametric study results, closed-form semi-empirical algebraic expression of damper plastic strength is developed for elliptical steel slit damper which shows very good agreement with finite element analysis as well as experiments. This developed expression can now be used for elliptical steel slit damper in replacement with any type of damper in the design of moment connection.

• Archives of Plastic Surgery
• /
• 제40권5호
• /
• pp.570-574
• /
• 2013

Background The elliptical excision is the standard method of removing benign skin lesions, such as congenital melanocytic nevi. This technique allows for primary closure, with little to no dog-ear deformity, but may sacrifice normal tissue adjacent to the lesion, resulting in scars which are unnecessarily long. This study was designed to compare the predicted results of elliptical excision with those resulting from our excision technique. Methods Eighty-two patients with congenital melanocytic nevus on the face were prospectively studied. Each lesion was examined and an optimal ellipse was designed and marked on the skin. After an incision on one side of the nevus margin, subcutaneous undermining was performed in the appropriate direction. The skin flap was pulled up and approximated along several vectors to minimize the occurrence of dog-ear deformity. Results Overall, the final wound length was 21.1% shorter than that achieved by elliptical excision. Only 8.5% of the patients required dog-ear repair. There was no significant distortion of critical facial structures. All of the scars were deemed aesthetically acceptable based on their Patient and Observer Scar Assessment Scale scores. Conclusions When compared to elliptical excision, our technique appears to minimize dogear deformity and decrease the final wound length. This technique should be considered an alternative method for excision of facial nevi.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.227-239
• /
• 2020

The aim of this study is to obtain the nonlinear and post-buckling responses of relatively thick functionally graded plates with oblique elliptical cutouts using a new semi-analytical approach. To model the oblique elliptical hole in a FGM plate, six plate-elements are used and the connection between these elements is provided by the well-known Penalty method. Therefore, the semi-analytical technique used in this paper is known as the plate assembly technique. In order to take into account for functionality of the material in a perforated plate, the volume fraction of the material constituents follows a simple power law distribution. Since the FGM perforated plates are relatively thick in this research, the structural model is assumed to be the first order shear deformation theory and Von-Karman's assumptions are used to incorporate geometric nonlinearity. The equilibrium equations for FGM plates containing elliptical holes are obtained by the principle of minimum of total potential energy. The obtained nonlinear equilibrium equations are solved numerically using the quadratic extrapolation technique. Various sets of boundary conditions for FGM plates and different cutout sizes and orientations are assumed here and their effects on nonlinear response of plates under compressive loads are examined.

• Steel and Composite Structures
• /
• 제39권3호
• /
• pp.319-335
• /
• 2021

This study proposes a new and highly-accurate artificial intelligence model, namely ANN-IP, which combines an interior-point (IP) algorithm and artificial neural network (ANN), to improve the axial compression capacity prediction of elliptical concrete-filled steel tubular (CFST) columns. For this purpose, 145 tests of elliptical CFST columns extracted from the literature are used to develop the ANN-IP model. In this regard, axial compression capacity is considered as a function of the column length, the major axis diameter, the minor axis diameter, the thickness of the steel tube, the yield strength of the steel tube, and the compressive strength of concrete. The performance of the ANN-IP model is compared with the ANN-LM model, which uses the robust Levenberg-Marquardt (LM) algorithm to train the ANN model. The comparative results show that the ANN-IP model obtains more magnificent precision (R² = 0.983, RMSE = 59.963 kN, a20 - index = 0.979) than the ANN-LM model (R² = 0.938, RMSE = 116.634 kN, a20 - index = 0.890). Finally, a new Graphical User Interface (GUI) tool is developed to use the ANN-IP model for the practical design. In conclusion, this study reveals that the proposed ANN-IP model can properly predict the axial compression capacity of elliptical CFST columns and eliminate the need for conducting costly experiments to some extent.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.83-84
• /
• 1996

• 천문학회보
• /
• 제23권
• /
• pp.32-32
• /
• 1998

• 한국공간구조학회논문집
• /
• 제20권1호
• /
• pp.49-59
• /
• 2020

This study investigates the wind pressure characteristics of elliptical plan retractable dome roof. Wind tunnel experiments were performed on spherical dome roofs with varying wall height-span ratios (0.1~0.5) and opening ratios (0%, 10%, 30% and 50%), similar to previous studies of cirular dome roofs. In previous study, wind pressure coefficients for open dome roofs have been proposed since there are no wind load criteria for open roofs. However, in the case of Eeliptical plan retractable dome roof, the wind pressure coefficient may be largely different due to the presence of the longitudinal direction and transverse direction. The analysis results leads to the exceeding of maximum and minimum wind pressure coefficients KBC2016 code.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.2022-2032
• /
• 1999

In recent years, the subject of remaining life assessment has drawn considerable attention in the power generation industry. In power generation systems a variety of structural components, such as steam pipes, turbine rotors, and superheater headers, typically operate at high temperatures and high pressures. Thus a life prediction methodology accounting for fracture and rupture is increasingly needed for these components. For accurate failure assessment, in addition to the single parameter such as K or J-integral used in traditional fracture mechanics, the second parameter like T-stress describing the constraint is needed. The most critical defects in such structures are generally found in the form of semi-elliptical surface cracks in the welded piping-joints. In this work, selecting the structures of surface-cracked plate and straight pipe, we first perform line-spring finite element modeling, and accompanying elastic-plastic finite element analyses. We then present a framework for including constraint effects (T-stress effects) in the R6 failure assessment diagram approach for fracture assessment.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.90-95
• /
• 2005

Most of mechanical structures are composed of many substructures connected to one another by various types of mechanical joints with various shapes of cutouts. It is important to study these connected structures under dynamic forces for evaluation of stress concentration. In this paper, a FQI(fatigue quality index) analysis using the concept of SF(severity factor) is performed to various shape of elliptical hole. The SF is affected by the location of cutout in plate and radius ratio, static SF is analyzed with finite element analysis and the equation of FQI for predicting a dynamic SF is formed.