Browse > Article
http://dx.doi.org/10.12989/scs.2022.43.6.759

Shape effect on axially loaded CFDST columns  

R, Manigandan (Department of Civil Engineering, Birla Institute of Technology and Science, Pilani (BITS Pilani))
Kumar, Manoj (Department of Civil Engineering, Birla Institute of Technology and Science, Pilani (BITS Pilani))
Publication Information
Steel and Composite Structures / v.43, no.6, 2022 , pp. 759-772 More about this Journal
Abstract
Concrete-filled double skinned steel tubular (CFDST) columns have been used to construct modern structures such as tall buildings and bridges as well as infrastructures as they provide better, lesser weight, and greater stiffness in structural performance than conventional reinforced concrete or steel members. Different shapes of CFDST columns may be needed to satisfy the architectural and aesthetic criteria. In the study, three-dimensional FE simulations of circular and elliptical CFDST columns under axial compression were developed and verified through the experimental test data from the perspectives of full load-displacement histories, ultimate axial strengths, and failure modes. The verified FE models were used to investigate and compare the structural performance of CFDST columns with circular and elliptical cross-section shapes by evaluating the overall load-deformation curves, interaction stress-deformation responses, and composite actions of the column. At last, the accuracy of available design models in predicting the ultimate axial strengths of CFST columns were investigated. Research results showed that circular and elliptical CFDST column behaviors were generally similar. The overall structural performance of circular CFDST columns was relatively improved compared to the elliptical CFDST column.
Keywords
axial compression; composite actions; Concrete-filled double skinned steel tubes (CFDST); finite element non-linear analysis;
Citations & Related Records
Times Cited By KSCI : 13  (Citation Analysis)
연도 인용수 순위
1 American Concrete Institute (A.C.I). (2014), Building Code Requirements for Structural Concrete. American Concrete Institute.
2 Ahmed, M., Liang, Q.Q., Patel, V.I. and Hadi, M.N.S. (2020), "Experimental and numerical investigations of eccentrically loaded rectangular concrete-filled double steel tubular columns", J. Construct. Steel Res., 167, 105949. https://doi.org/10.1016/j.engstruct.2019.109790.   DOI
3 Avci-Karatas, C. (2019), "Prediction of ultimate load capacity of concrete-filled steel tube columns using multivariate adaptive regression splines (MARS)", Steel Compos. Struct., 33(4), 583-594. https://doi: 10.12989/scs.2019.33.4.583.   DOI
4 Ayough, P., Ibrahim, Z., Sulong, N.H.R. and Hsiao, P.C. (2021), "The effects of cross-sectional shapes on the axial performance of concrete-filled steel tube columns", J. Construct. Steel Res., 176, 106424. https://doi: 10.1016/j.jcsr.2020.106424.   DOI
5 Ci, J., Jia, H., Ahmed, M., Chen, S., Zhou, D. and Hou, L. (2021), "Experimental and numerical analysis of circular concrete-filled double steel tubular stub columns with inner square hollow section", Eng. Struct., 227(August 2020), 111400. https://doi:10.1016/j.engstruct.2020.111400.   DOI
6 Cicekli, U., Voyiadjis, G.Z., and Abu Al-Rub, R.K. (2007), "A plasticity and anisotropic damage model for plain concrete", Int. J. Plasticity, 23(10-11), 1874-1900. https://doi:10.1016/j.ijplas.2007.03.006.   DOI
7 Dai, X. and Lam, D. (2010), "Numerical modelling of the axial compressive behaviour of short concrete-filled elliptical steel columns", J. Construct. Steel Res., 66(7), 931-942. https://doi:10.1016/j.jcsr.2010.02.003.   DOI
8 Dong, C. and Ho, J.C.M. (2013), "Improving interface bonding of double-skinned CFST columns", Mag. Concrete Res., 65(20), 1199-1211. https://doi:10.1680/macr.13.00041.   DOI
9 Duarte, A.P.C., Silva, B.A., Silvestre, N., de Brito, J., Julio, E. and Castro, J.M. (2016), "Finite element modelling of short steel tubes filled with rubberized concrete", Compos. Struct. 150, 28-40. https://doi:10.1016/j.compstruct.2016.04.048.   DOI
10 Elchalakani, M., Zhao, X.L. and Grzebieta, R. (2002), "Tests on concrete filled double-skin (CHS outer and SHS inner) composite short columns under axial compression", Thin-Wall. Struct., 40(5), 415-441. https://doi:10.1016/S02638231(02)00009-5.   DOI
11 Farajpourbonab, E. and Rafieioskoei, A. (2018), "Behavior of CFDST columns with octagon and polygon steel sections", J. Urban Environ. Eng., 12(2), 236-244. https://doi:10.4090/juee.2018.v12n2.236244.   DOI
12 Grassl, P. and Jirasek, M. (2006), "Damage-plastic model for concrete failure", Int. J. Solids Struct., 43(22-23), 7166-7196. https://doi:10.1016/j.ijsolstr.2006.06.032.   DOI
13 Han, L.H., Zhao, X.L. and Tao, Z. (2001), "Tests and mechanics model for concrete-filled SHS stub columns, columns and beam-columns", Steel Compos. Struct., 1(1), 51-74. https://doi:10.12989/scs.2001.1.1.051.   DOI
14 Han, L.H., Huang, H. and Zhao, X.L. (2009), "Analytical behaviour of concrete-filled double skin steel tubular (CFDST) beam-columns under cyclic loading", Thin-Wall. Struct., 47(6-7), 668-680. https://doi: 10.1016/j.tws.2008.11.008.   DOI
15 Hu, H.T. and Su, F.C. (2011), "Non-linear analysis of short concrete-filled double skin tube columns subjected to axial compressive forces", Marine Struct., 24(4), 319-337. https://doi:10.1016/j.marstruc.2011.05.001.   DOI
16 Han, L.H., Yao, G.H. and Tao, Z. (2007), "Performance of concrete-filled thin-walled steel tubes under pure torsion", Thin-Wall. Struct., 45(1), 24-36. https://doi:10.1016/j.tws.2007.01.008.   DOI
17 Han, L.H., Yao, G.H. and Zhao, X.L. (2005), "Tests and calculations for hollow structural steel (HSS) stub columns filled with self-consolidating concrete (SCC)", J. Construct. Steel Res., 61(9), 1241-1269. https://doi:10.1016/j.jcsr.2005.01.004.   DOI
18 Hu, H.T., Huang, C.S., Wu, M.H. and Wu, Y.M. (2003), "Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect", J. Struct. Eng.. 129(10), 1322-1329. https://doi:10.1061/(ASCE)07339445(2003)129:10(1322).   DOI
19 Huang, H., Han, L.H., Tao, Z. and Zhao, X.L. (2010), "Analytical behaviour of concrete-filled double skin steel tubular (CFDST) stub columns", J. Construct. Steel Res., 66(4), 542-555. https://doi:10.1016/j.jcsr.2009.09.014.   DOI
20 Ipek, S., Erdogan, A. and Guneyisi, E.M. (2021), "Compressive behavior of concrete-filled double skin steel tubular short columns with the elliptical hollow section", J. Build. Eng., 38(January). https://doi:10.1016/j.jobe.2021.102200.   DOI
21 Li, D., Uy, B. and Patel, V.I. (2015), "Behaviour of demountable CFST column-column connections", The 2015 World Congress on Adavances in Structural Engineering and Mechanics (ASEM15), August 25-29.
22 Pagoulatou, M., Sheehan, T., Dai, X.H. and Lam, D. (2014), "Finite element analysis on the capacity of circular concretefilled double-skin steel tubular (CFDST) stub columns", Eng. Struct., 72, 102-112. https://doi:10.1016/j.engstruct.2014.04.039.   DOI
23 Liao, F.Y., Han, L.H., Tao, Z. and Rasmussen, K.J.R. (2017), "Experimental behavior of concrete-filled stainless steel tubular columns under cyclic lateral loading", J. Struct. Eng. (United States), 143(4), 1-15. https://doi: 10.1061/(ASCE)ST.1943-541X.0001705.   DOI
24 Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989), "A Plastic-Damage Model", Int. J. Solids Struct., 25(3), 299-326.   DOI
25 Mi, Y., Liu, Z., Wang, W., Yang, Y. and Wu, C. (2020), "Experimental study on residual axial bearing capacity of UHPFRC-filled steel tubes after lateral impact loading", Structures, 26(March), 549-561. https://doi:10.1016/j.istruc.2020.04.032.   DOI
26 Tao, Z., Wang, Z.B. and Yu, Q. (2013), "Finite element modelling of concrete-filled steel stub columns under axial compression", J. Construct. Steel Res., 89, 121-131. https://doi:10.1016/j.jcsr.2013.07.001.   DOI
27 Ronagh, M. (2011), "Plastic hinge length of RC columns subjected to both far-fault and near-fault ground motions having forward directivity", Struct. Des. Tall Spec. Build., 24(July 2014), 421-439. https://doi:10.1002/tal.   DOI
28 Sulthana, U.M. and Jayachandran, S.A. (2018), "Investigations on global buckling behaviour of concrete-filled double-skinned steel tubular columns", 419-424. https://doi:10.4995/asccs2018.2018.7144.   DOI
29 Tao, Y. and Chen, J.F. (2015), "Concrete damage plasticity model for modeling FRP-to-concrete bond behavior", J. Compos. Construct., 19(1), 04014026. https://doi:10.1061/(asce)cc.1943-5614.0000482.   DOI
30 Uy, B. (2001), "Strength of short concrete filled high strength steel box columns", J. Construct. Steel Res., 57(2), 113-134. https://doi: 10.1016/S0143-974X(00)00014-6.   DOI
31 ABAQUS (2014), Analysis User's Manual 6.14-EF, Dassault Systems Simulia Corp., Providence.
32 Alqawzai, S., Chen, K., Shen, L., Ding, M., Yang, B. and Elchalakani, M. (2020), "Behavior of octagonal concrete-filled double-skin steel tube stub columns under axial compression", J. Construct. Steel Res., 170, 106115. https://doi:10.1016/j.jcsr.2020.106115.   DOI
33 Chung, K.S., Kim, J.H., and Yoo, J.H. (2013), "Experimental and analytical investigation of high-strength concrete-filled steel tube square columns subjected to flexural loading", Steel Compos. Struct., 14(2), 133-153. https://doi:10.12989/scs.2013.14.2.133.   DOI
34 Dai, X.H., Lam, D., Jamaluddin, N. and Ye, J. (2014,. "Numerical analysis of slender elliptical concrete filled columns under axial compression", Thin-Wall. Struct., 77, 26-35. https://doi:10.1016/j.tws.2013.11.015.   DOI
35 Hassanein, M.F., Elchalakani, M., Karrech, A., Patel, V.I, and Yang, B. (2018), "Behaviour of concrete-filled double-skin short columns under compression through finite element modelling: SHS outer and SHS inner tubes", Struct., 14(April), 358-375. https://doi:10.1016/j.istruc.2018.04.006.   DOI
36 Dong, J., Ma, H., Zou, C., Liu, Y. and Huang, C. (2019), "Finite element analysis and axial bearing capacity of steel reinforced recycled concrete filled square steel tube columns", Struct. Eng. Mech., 72(1), 805-822. https://doi:10.12989/sem.2019.72.1.043.   DOI
37 Eltobgy, H.H. (2013). "Structural design of steel fibre reinforced concrete in-filled steel circular columns", Steel Compos. Struct., 14(3), 267-282. https://doi:10.12989/scs.2013.14.3.267.   DOI
38 Guo, Z., Chen, Y., Wang, Y. and Jiang, M. (2020), "Experimental study on square concrete-filled double skin steel tubular short columns", Thin-Wall. Struct., 156(March), 107017. https://doi:10.1016/j.tws.2020.107017.   DOI
39 Hu, H.T., Su, F.C. and Elchalakani, M. (2010), "Finite element analysis of CFT columns subjected to pure bending moment", Steel Compos. Struct., 10(5), 415-428. https://doi:10.12989/scs.2010.10.5.415.   DOI
40 Le Hoang, A. and Fehling, E. (2017), "Analysis of circular steel tube confined UHPC stub columns", Steel Compos. Struct., 23(6), 669-682. https://doi:10.12989/scs.2017.23.6.669.   DOI
41 Lai, M.H. and Ho, J.C.M. (2014), "Experimental and theoretical studies of confined HSCFST columns under uni-axial compression", Earthq. Struct., 7(4), 527-552. https://doi:10.12989/eas.2014.7.4.527.   DOI
42 Han, L.H., Ren, Q.X. and Li, W. (2011), "Tests on stub stainless steelconcretecarbon steel double-skin tubular (DST) columns", J. Construct. Steel Res., 67(3), 437-452. https://doi:10.1016/j.jcsr.2010.09.010.   DOI
43 Vernardos, S. and Gantes, C. (2019), "Experimental behavior of concrete-filled double-skin steel tubular (CFDST) stub members under axial compression: A comparative review", Structures, 22(June), 383-404. https://doi:10.1016/j.istruc.2019.06.025.   DOI
44 Muthukumar, G. and Kumar, M. (2014), "Failure criteria of concrete - A review", Comput. Concrete, 14(5), 503-525. https://doi: 10.12989/cac.2014.14.5.503.   DOI
45 Shiming, C. and Huifeng, Z. (2012), "Numerical analysis of the axially loaded concrete filled steel tube columns with debonding separation at the steel-concrete interface", Steel Compos. Struct., 13(3), 277-293. https://doi:10.12989/scs.2012.13.3.277.   DOI
46 Tao, Z., Han, L.H. and Zhao, X.L. (2004), "Behaviour of concretefilled double skin (CHS inner and CHS outer) steel tubular stub columns and beam-columns", J. Construct. Steel Res., 60(8), 1129-1158. https://doi:10.1016/j.jcsr.2003.11.008.   DOI
47 Wai-Fah C. (1982), Plasticity in Reinforced Concrete. McGraw-Hill, New York.
48 Wang, F., Young, B. and Gardner, L. (2019), "Experimental Study of Square and Rectangular CFDST Sections with Stainless Steel Outer Tubes under Axial Compression", J. Struct. Eng., 145(11), 04019139. https://doi:10.1061/(asce)st.1943-541x.0002408.   DOI
49 Yan, X.F. and Zhao, Y.G. (2021), "Experimental and numerical studies of circular sandwiched concrete axially loaded CFDST short columns", Eng. Struct., 230(December 2020), 111617. https://doi:10.1016/j.engstruct.2020.111617.   DOI
50 Yang, J., Xu, H. and Peng, G. (2008). "Behavior of concrete-filled double skin steel tubular columns withoctagon section under axial compression", Front. Architect. Civil Eng. China, 2(3), 205-210. https://doi:10.1007/s11709-008-0035-5.   DOI
51 Zhao, X.L. and Grzebieta, R. (2002), "Strength and ductility of concrete filled double skin (SHS inner and SHS outer) tubes", Thin-Wall. Struct., 40(2), 199-213. https://doi:10.1016/S0263-8231(01)00060-X.   DOI
52 Yang, Y.F., Han, L.H. and Sun, B.H. (2012), "Experimental behaviour of partially loaded concrete filled double-skin steel tube (CFDST) sections", J. Construct. Steel Res., 71, 63-73. https://doi:10.1016/j.jcsr.2011.11.005.   DOI
53 Yu, Q., Tao, Z. and Wu, Y.X. (2008), "Experimental behaviour of high-performance concrete-filled steel tubular columns", Thin-Wall. Struct., https://doi: 10.1016/j.tws.2007.10.001.   DOI
54 Zhang, D., Zhao, J. and Zhang, Y. (2018), "Experimental and Numerical Investigation of Concrete-Filled Double-Skin Steel Tubular Column for Steel Beam Joints", Adv. Mater. Sci. Eng., https://doi:10.1155/2018/6514025.   DOI
55 Zhao, X.L., Grzebieta, R. and Elchalakani, M. (2002), "Tests of concrete-filled double skin CHS composite stub columns", Steel Compos. Struct., 2(2), 129-146. https://doi:10.12989/scs.2002.2.2.129.   DOI