• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.3 no.2
• /
• pp.11-17
• /
• 1985

In the three dimensional Cartesian Coordinate System such as the satellite geodesy the relationship of the geoid and the reference ellipsoid must be known. Therefore, the determination of geoidal heights is regarded as one of the most important problem in geodesy. This paper deals with determination of astro-geodetic geoid by the spherical surface polynomials interpolation method. The data that astronomical deflection of the vertical was published by National Geography Institute is applied. The map of geoidal heights is drawn out. This shows that Tokyo Datum have influenced on Korea.

• Mycobiology
• /
• v.28 no.1
• /
• pp.51-53
• /
• 2000

The powdery mildew of safflower (Carthamus tinctorius L.) extensively occurred at 1999 at the experimental farm of Kyongsangnam-do Agricultural Research and Extension Services. Both sides of the leaves and the older stems were covered with the fungus, and then the leaves and stems turned yellow. The conidia, conidiophores and perithecia were observed on the leaf lesion. Perithecia were ellipsoidal, $80-117\;{\mu}m$ in diameter. Asci were subglobose and $84{\sim}99{\times}59{\sim}73\;{\mu}m$ in size. Ascospore were ellipsoidal to ovoid, and $15{\sim}34{\times}11{\sim}23\;{\mu}m$ in size. Conidia were ellipsoid to barrel-shaped, $25{\sim}37{\times}11{\sim}22\;{\mu}m$ in size and formed in long chains. The causal organism was identified as Sphaerotheca fuliginea. This is the first report on powdery mildew of safflower caused by Sphaerotheca fuliginea in Korea.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.1
• /
• pp.100-104
• /
• 2003

The SVDD(support vector data description) is one of the most well-known one-class support vector learning methods, in which one tries the strategy of utilizing balls defined on the kernel feature space in order to distinguish a set of normal data from all other possible abnormal objects. The major concern of this paper is to consider the problem of modifying the SVDD into the direction of utilizing ellipsoids instead of balls in order to enable better classification performance. After a brief review about the original SVDD method, this paper establishes a new method utilizing ellipsoids in feature space, and presents a solution in the form of SDP(semi-definite programming) which is an optimization problem based on linear matrix inequalities.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.928-933
• /
• 1998

The temperature and stress behaviour of mass concrete pier at early ages was analysed based on the finite element method. The pier investigated is a three-dimensional structure of which the cross-sectional shape varies from a circle to an ellipsoid along the longitudinal axis. In order to obtain the transient temperature and stress distributions in the structure, a three dimensional method was adopted, because the structure of this type cannot be modeled accurately by a two-dimensional method. Temperature analysis was performed by taking into consideration of the cement type and content, boundary and environment conditions including the variations of atmospheric temperature and wind velocity. The results of this study may be useful for the temperature control to restrain thermal cracking and the construction management to design the resonable curing method of mass concrete structure.

• Journal of applied mathematics & informatics
• /
• v.9 no.1
• /
• pp.277-288
• /
• 2002

Influence of form errors of a chamber filled with a liquid on the movement and stability of a ball, rotating in the chamber, is studied. Two cases of the influence of the chamber form errors on the forces, acting on the ball, are defined. The first case describes the situation when limitations on the rotor shift are not imposed and disturbances of the chamber form are set by spherical harmonics not above the first order. In the second case disturbance of a chamber form is arbitrary and the rotor is supposed small. A rising here diflective moment tends to direct the angular speed vector along the small semiaxis of the ellipsoid, i.e., a stable position of the rotor appears.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.112-119
• /
• 2000

A die-casting junction method is usually used to manufacture the tub of an IH(induction heating) jar. If there is a very small air bubble in the junction area, the thermal conductivity is deteriorated and local overheat occurs. Such problem brings serious inferiority of the IH jar. In this paper, we propose a new method to detect such defect with simply measured thermal data. Thermal distribution of preheated tubs is obtained by scanning with infrared thermal sensors and analyzed with the statistic pattern recognition method. By defining the characteristic feature as the temperature difference between sensors and using ellipsoid function as decision boundary, a supervised learning method of genetic algorithm is proposed to obtain the required parpameters. After applying the proposed method to experiment, we have proved that the rate of recognition is high even for a small number of data set.

• Mycobiology
• /
• v.38 no.2
• /
• pp.149-152
• /
• 2010

This study describes a new record of a thelotremoid lichen (Leucodecton desquamescens) from South Korea. The taxon is characterized by thick, bulging thallus with many calcium oxalate crystal inclusions; an immersed, round to irregular ascomata with free exciple, ellipsoid to $\pm$ roundish submuriform, brown ascospores, and lack of secondary metabolites. A detailed taxonomic description and comments are presented for this taxon. The lichen genus Leucodecton is reported for the first time in South Korea.

• Mycobiology
• /
• v.35 no.2
• /
• pp.45-46
• /
• 2007

Lecanora muralis was found on the rock along coastal line during the field trip in Jeju island in 2006. Thallus crustose, placodioid, closely adnate, forming orbicular patches; upper surface grayish green, glossy; central lobes areolate, marginal parts plane, edges thin pruinose; lower surface ecorticate; apothecia sessile, lecanorine type, exciple dense and intact when young, and disc plane, but when mature, exciple laciniate, disc protrudent, yellowish brown to orange, $0.5{\sim}1.5$ mm in diameter; ascospores ellipsoid, simple, colorless, $12.5{\sim}15.0{\times}5.0{\sim}7.5\;{\mu}m$. Usnic acid and zeorin contained in thallus. This is the first record of this species in South Korea.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.190-191
• /
• 2007

Focused shock wave generation was tested under the water by the method of wire explosion. The wire was installed a focal point of the half ellipsoid, and the shock wave was focused on the other focal point. A numerous cavitations were observed in the path of the traveling shock wave and focal point by using high speed camera.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.213-223
• /
• 1999

In this paper, input-output transmission characteristics of the Eclipse, which is a parallel machine tool capable of 5 face rapid machining, are investigated. By splitting the weighted Jacobian matrix into two parts, the force and moment transmission characteristics together with the velocity and angular velocity transmission characteristics are analyzed. A new manipulability measure, which combines the volume of the manipulability ellipsoid and the condition number of the splitted Jcobian matrix, is proposed. Two link parameters, the ratio of upper and lower platforms' radii and the length of a supporting link of the Eclipse, are designed by applying the new manipulability measure derived. Computer simulations are provided.