• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4379-4397
• /
• 2017

Three different improvements of the Velocity-based model were proposed in a minimal velocity-based pedestrian model. The improvements of the models are based on the different agent forms. The different representations of the agent lead to different results, in this paper, we simulated the pedestrian movements in some typical scenes by using different agent forms, and the agent forms included the circles with different radiuses, the ellipse and the multi-circle stand for one pedestrian. We have proposed a novel model of pedestrian dynamics to optimize the simulation. Our model specifies the pedestrian behavior using a dynamic ellipse, which is parameterized by their velocity and can improve the simulaton accuracy. We found a representation of the pedestrian much closer to the reality. The phenomena of the self-organization can be observable in the improved models.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권2호
• /
• pp.73-77
• /
• 2012

This paper reports a combined depth- and model-based face detection and tracking approach. The proposed algorithm consists of four functional modules; i) color-based candidate region extraction, ii) generation of the depth histogram for handling occlusion, iii) rotation-invariant face region detection using ellipse fitting, and iv) face tracking based on motion prediction. This technique solved the occlusion problem under complicated environment by detecting the face candidate region based on the depth-based histogram and skin colors. The angle of rotation was estimated by the ellipse fitting method in the detected candidate regions. The face region was finally determined by inversely rotating the candidate regions by the estimated angle using Haar-like features that were robustly trained robustly by the frontal face.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.455-466
• /
• 2020

This paper presents analysis of the interaction between tunnel and Qanat with a particular interest for the optimization of Qanat shape using the discrete element code, PFC2D, and the results will be compared with the FEM results of PLAXIS2D. For these concerns, using software PFC2D based on Discrete Element Method (DEM), a model with dimension of 100m ^⁎ 100 m was prepared. A circular tunnel with dimension of 9 m was situated 20 m below the ground surface. Also one Qanat was situated perpendicularly above the tunnel roof. Distance between Qanat center and ground surface was 8 m. Five different shapes for Qanat were selected i.e., square, semi-circular, vertical ellipse, circular and horizontal ellipse. Confining pressure of 5 MPa was applied to the model. The vertical displacement of balls situated in ground surface was picked up to measure the ground subsidence. Also two measuring circles were situated at the tunnel roof and at the Qanat roof to check the vertical displacements. The properties of the alluvial soil of Tehran city are: γ_dry=19 (KN/㎥), E= 750 (kg/㎠), ν=0.35, c=0.3(kg/㎠), φ=34°. In order to validate the DEM results, a comparison between the numerical results (obtained in this study) and analytical and field monitoring have been done. The PFC2D results are compared with the FEM results. The results shows that when Qanat has rectangular shape, the tensile stress concentration at the Qanat corners has maximum value while it has minimum value for vertical ellipse shape. The ground subsidence for Qanat rectangular shape has maximum value while it has minimum value for ellipse shape of Qanat. The vertical displacements at the tunnel roof for Qanat rectangular shape has maximum value while it has minimum value for ellipse shape of Qanat. Historical shape of Qante approved the finding of this research.

• Tribology and Lubricants
• /
• 제23권4호
• /
• pp.149-155
• /
• 2007

The CAD model of a elliptical gear for wire cutting has been developed. The rolling contact of pitch ellipses whose rotation axes coincide with their focus has been analyzed, and the perimeter of the pitch ellipse has been divided into equal-length segments by the number of teeth. A master tooth profile, which is a composite curve of circular arcs that represents involute, has been introduced. The elliptical gear has been designed by imposing the master tooth on the divided points of the pitch ellipse, and a full fillet has been achieved between neighbour teeth. Thus, the whole profile of an elliptical gear is a composite curve of arcs only, and consequently NC codes for wire cutting can be easily generated. Furthermore, a computer simulation program is developed to verify the mesh of the elliptical gear.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.828-831
• /
• 2005

본 논문에서는 얼굴을 검출하기 위해서 컬러영상에서 눈동자 템플릿을 사용한 얼굴을 검출하는 방법에 관해 제안하였다. 전체 시스템의 구성은 크게 피부색 모델에 의한 피부 영역을 검출하고 검출된 피부 영역에 타원을 적용하여 얼굴영역을 찾은 뒤 템플릿을 사용하여 눈동자를 추출하여 정규화 된 얼굴을 검출하는 단계로 이루어 졌다. 특히 타원을 적용할 때와 눈동자 템플릿을 적용할 때는 모멘트를 사용하였으며, 눈동자를 추출할 때 벡터를 기반으로 하기 때문에 사이즈에 제한 없이 자유로운 변형이 가능할 뿐만 아니라 눈동자 템플릿을 사용하면 눈동자의 위치와 크기를 동시에 얻어 낼 수 있었다. 마지막으로 이렇게 검출된 얼굴을 기울어진 각도만큼 회전시켜 정규화 된 얼굴을 검출 할 수 있었다.

• Journal of Radiation Protection and Research
• /
• 제15권2호
• /
• pp.51-56
• /
• 1990

대기로 방출된 방사성 물질의 대기 확산 형태를 파스킬의 대기안정도에 따른 모델인 타원형 근사화 모델로 가정하고 인체가 받을 수 있는 감마선에 의한 피폭선량률을 계산하였다. 이 결과를 대기 확산 기본 모델인 가우스플룸 모델을 적용하여 계산한 결과 및 이미 발표된 원형 근사화 모델에 의한 결과와 비교하여 보았다. 제시한 타원형 근사화 모델을 이용하여 피폭선량을 계산한 결과는 가우스플룸 모델의 결과와 비슷하고, 원형 근사화 모델의 경우보다 오차가 적었으며, 동시에 기본 모델인 가우스 플룸 모델과 비교할 때 1/40 정도의 계산 시간이 걸렸다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.11-14
• /
• 2003

The magnetization and self-field losses of the four technical high-T$_{c}$ superconducting tapes have been investigated experimentally. The results show that the magnetization losses for parallel or perpendicular fields can be well predicted from the slab model or the strip model for a filamentary region. However the magnetization losses for longitudinal fields can be rather predicted by the slab model for a decoupled filament. The self-field losses are well explained by the Norris ellipse model.l.

• Ocean Science Journal
• /
• 제42권3호
• /
• pp.153-163
• /
• 2007

This study is based on a series of numerical modeling experiments to understand the tidal circulation in the Kangjin Bay (KB). The tidal circulation in the KB is mostly controlled by the inflow from two channels, Noryang and Daebang which introduce the open ocean water into the northern part of the KB with relatively strong tidal current, while in the southern part of the KB, shallowest region of the entire study area, weak tidal current prevails. The model prediction of the sea level agrees with observed records at skill scores exceeding 90 % in terms of the four major tidal constituents (M2, S2, K1, O1). However, the skill scores for the tidal current show relatively lower values of 87, 99, 59, 23 for the semi-major axes of the constituents, respectively. The tidal ellipse parameters in the KB are such that the semi-major axes of the ellipse for M2 range from 1.7 to 38.5 cm/s and those for S2 range from 0.5 to 14.4 cm/s. The orientations of the major-axes show parallel with the local isobath. The eccentricity values at various grid points of ellipses for M2 and S2 are very low with 0.2 and 0.06 on the average, respectively illustrating that the tidal current in the KB is strongly rectilinear. The magnitude of the tidal residual current speed in the KB is on the order of a few cm/s and its distribution pattern is very complex. One of the most prominent features is found to be the counter-clockwise eddy recirculation cell at the mouth of the Daebang Channel.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.17-24
• /
• 2003

One of the most important performance criteria related to the gain tuning of controller for CNC machining center is the contour error. This study analyzed circular error by the axis-matched and mismatched cases. To reduce ellipse and radius error, it is necessary to set the gain for each axis to be same bandwidth and high response. Based on the analysis in the frequency domain, we simulate feed system by mathematical model and then predict bandwidth of each axis. For analysis of structure vibration while the each axis is moving, we try the various of measuring method and position loop is improved by jerk limit.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.969-970
• /
• 2006

This paper develops a recognition system of assembly parts using a hardware independent image module. Using a shared memory, the image module consists of the image acquiring process and the image processing process. We preprocess an acquisition image from the module, approximate the image edges to an ellipse, and then recognize an assembly part by matching the ellipse to a model base one.