• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.257-258
• /
• 2008

Hall-type current sensors have been widely used in many fields such as elevator and train system. To estimate lifetime of hall-type current sensors, an accelerated life test with real-time monitoring system simultaneously was designed and performed in high temperature environment with three different temperatures. From the experimental results, activation energy was about 0.9 eV, and acceleration factor was about 450 based on Arrhenius model. As a results, $B_{10}$ lifetime of hall-type current sensor is estimated to be 65,460 hours.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.18 no.3
• /
• pp.41-49
• /
• 2012

Most large-sized and tall-risen general hospitals of today fairly depend on in-patient wards in designing hospital styles. The core planning for the efficient movements of various people in the words should take into account the sustainable connections between/among the floors, as well as hospital structures and mechanical functions. This study sampled for the study 19 hospital in-patient wards and investigated their flat-core styles. It was found out that hospital structures are changing from symmetrical styles of triangles, quadrangles and rectangles through bending, configuring, transforming to efficient new styles. Symmetrically quadrangled flat-styles are made of multi-cores spread with main an sub-cores. In contrast, symmetrically triangled flat-styles place the open place in the middle in order to prevent from its deepening, and widened the depth line through changing the outdoor top point. Non-symmetrical rectangles minimized the depth value to maintain the recent styles used in the wards, and tended to prefer the transformed styles of quadrangles. The double-corridors easily transshaped from mono corridors reveals the triangled, W-shaped, or Y-shaped figures. The site area ratio of the cores is 11.95% in average. The number of beds which one elevator covers is 66.51 beds in average, and the size of site area which one elevator covers 216.68m. Most cores on the base floor clustered around the average value, with more than 1000 beds shoes 12.83%, does 12.93%, does 14.64%, does 14.58%, which says that the core ratio increases according to hospital beds.

• Journal of Families and Better Life
• /
• v.22 no.6 s.72
• /
• pp.133-142
• /
• 2004

The purpose of this study was to investigate the spatial composition characteristics of elderly housing facilities in Korea, in order to refer them in establishing the basic plan for elderly housing in Korea. The case study performed in this study from October 16 to October 31 is based on ten housing facilities for the elderly in KOREA. During the site visits, the interview with the custodians, survey of the space, picture taking and diagram gathering were carried out. The results of this study were as follows; 1. The type of floor plan was classified into ㅁ type, L type, and ㅡ type. And they hadn't an outside space called a garden(courtyard). 2. The kinds of common spaces could be grouped as the space for basic living, for leisure, and for convenient living. Also it was all common that the housing facility had common diningroom laundry room once, and activity room. The type of the common spaces was categorized into three types, the centralized type where the shared space was located at the center of the housing facilities, the distributed type, depending on the degree of separation between common spaces and units, and another each building type. 3. The kinds of units was classified into studio, oneroom, one bedroom and two bedroom. 4. Elevator, safety grab bar, emergency bell, and the door handle of lever or bar type were placed in these facilities.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.4
• /
• pp.55-61
• /
• 1995

Variable structure control (VSC) can be used for the control of power plants required stability and robustness such as elevator control. It has no overshoot and is insensitive to parameter variations and disturbances in the sliding mode where the system structure is changed with the sliding surface in the center. But in the real system, VSC has a high frequency chattering which has a bad influence upon the control system proformances. In this paper, to alleviate the high frequency chattering, a binary controller (BC) with inertial type external loop is implemented by DSP and applied to position control of brushless DC motor. Binary controller has external loop to generate the continuous control input with the flexible variation of primary loop gain. Thus it has the property of chattering alleviation in addition to advantages of the conventional variable structure control.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.52-55
• /
• 2004

Before incorporating the earthquake-resistance design in design code(998), most of existing residential buildings were built without having lateral resistance capacity in addition to their structural peculiarity such as exterior stair ways, exterior elevator room. For these reasons, the retrofitting research demands for existing buildings arise recently and many retrofitting methods are proposed. These tasks are important to reduce the enormous economic loss and environmental issues. In this study, Scaled residential buildings with/without lateral resistance were tested and monitored with external lateral load especially toward the longer side of the building. From these experiments, enhanced retrofitting methods of old shear wall system are proposed and also compared with structural analysis.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.832-834
• /
• 2010

본 논문에서는 권선형 엘리베이터 시스템의 종방향의 운동을 표현할 수 있는 운동방정식을 도출한다. 기존의 권선형 엘리베이터 시스템의 종진동을 억제하기 위하여 MR유체를 특징으로 하는 댐퍼를 적용하고, MR댐퍼가 적용된 시스템의 운동방정식을 도출한다. 부하하는 자기장에 따른 엘리베이터 시스템의 종진동 저감의 변화를 관찰하였다.

• Structural Engineering and Mechanics
• /
• v.49 no.4
• /
• pp.523-536
• /
• 2014

Before incorporating the earthquake-resistance design in design standard (1988) in South Korea, most of existing residential buildings were built without having lateral resistance capacity in addition to their structural peculiarity, such as exterior stair ways, exterior elevator room. For these reasons, the demands on retrofitting research for existing buildings arise recently and many retrofitting methods are proposed. These tasks are important to reduce the enormous economic loss and environmental issues. As the main purpose, this study was intended to examine the performance improvement in terms of ductility and strength in the wake of retrofitting and to suggest retrofitting details.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.1
• /
• pp.85-92
• /
• 2015

Universal Design involves designing products and spaces so that they can be used by the widest range of people possible. Universal Design evolved from Accessible Design, a design process that addresses the needs of people with disabilities. This paper introduces the universal design concept through analysis of causes of railway accident within the urban railway station. Railway accident analysis was performed by the internal facilities. We analyzed the standard of accident type, accident cause and accident subject such as elevator, escalator, stairs etc.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1246-1253
• /
• 2000

Wire ropes are widely used in cable car, suspension bridge and elevator, etc. and there has been a growing need for ropes of large diameter. The theoretical procedures to obtain the stiffness coefficients of wire ropes, using previously reported theory, are programmed and the verification of the program is made. The effects of lay angle on the stiffness of strand are researched and comparisons on stiffness of rope are made according to the lay type. Axial stiffness optimization problems with coupling and torsional stiffness constraints are formulated and the effects of constraints on other stiffness coefficients on axial stiffness optimization are investigated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.260-261
• /
• 2017

The objective of this study is to propose the basic design plan of system by comparing and analyzing application environment of lift and elevator group control system, as preliminary study for the application of group control system to lifts for high-rise construction. The basic design plan is suggested in terms of group control algorithm, hall call system type, operation information recording device, information communication method, and operation method. The results of this study can be used as basic data for software and hardware design for application of group control technology of lifts for super tall building construction and ultimately contribute to improve the operation efficiency of lift for high-rise construction.