• 한국농촌건축학회논문집
• /
• 제7권1호
• /
• pp.1-10
• /
• 2005

The aim of This study is to establish existing of Munhwa-Maul, and analysis exterior form and elevation types of housing in new village of rural area. And it was studied on data and general conditions about it. The analysis of this research is divided into main categories as follow; classification of exterior form types, drawing an elevation of housing in Munhwa-Maul. So, I needed both field survey and research for data of 22 new village. Through this study and the results of survey are as follows; Munhwa-Maul is role to establish people settled village in rural area. The types of house are several and various in Munhwa-Maul. Especially, masonry construction type of housing has about 80%. But recently new types of housing are on the increase. So, Munhwa-Maul has a new landscape of village. It was grouped by three exterior form of dwelling housing. The ratio of box form has about 40%. Lastly, the types of elevation are four. Flat-roof style has about 70% including eyebrow flat-roof.

• Spatial Information Research
• /
• 제10권3호
• /
• pp.439-453
• /
• 2002

수자원분야에서 DEM을 활용한 연구들이 활발히 진행되고 있으며, 특히 지형 및 수문분석의 기초가 되는 유역과 하천 추출은 GIS 분석에서 일반화되어 있다. 그러나 경사가 완만한 지형에서는 가늘고 긴 슬리버 폴리곤 형태의 유역이나 직선형태의 하천이 추출되므로, 활용측면에서 비 효율적이다 본 연구에서는 완경사지역에서 발생하는 비정상적인 유역과 하천을 효과적으로 추출하기 위해, 하천을 중심으로 완충구간을 설정한 후 점진적인 표고변화를 적용하였다. 특히 점진적인 표고변화를 부여하기 위해 보로노이 다이어그램(Voronoi Diagram)을 활용한 등거리 할당모형을 적용하였다. 또한 추출한 하천인식 DEM과 원시 DEM을 이용하여 유역 및 하천을 추출한 후, 완경사 지역에서의 유역 및 하천의 형태를 상호 비교함으로서 본 연구의 효용성을 평가하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.61-64
• /
• 2007

Subsurface Internal Waves (IWs) can be detected in satellite images as periodic alternating brighter/darker stripes. It is known that there are two types of IWs - depression type and elevation type - depending on the water depth in stratified oceans. In this study, we have quantitatively verified the process of converting polarity from depression waves to elevation waves using ERS-2 SAR images acquired over the northern South China Sea. We simulated the evolution of IWs near a turning point with a numerical model for internal wave propagation. The simulation results near the turning point clearly showed us not only a conversion process of IWs from depression to elevation waves, but also a similar wave pattern with the observed SAR image. We also simulated SAR intensity variation near the turning point. The upper layer currents were computed at regular intervals using the numerical model, as the IWs were passing through the turning point. Then, an integrated hydrodynamic-electromagnetic model was used for simulating SAR intensity profiles from the upper layer currents at each position. The simulated SAR intensity profiles at each position were compared with the observed SAR intensities.

• 대한원격탐사학회지
• /
• 제23권5호
• /
• pp.385-391
• /
• 2007

Subsurface Internal Waves(IWs) can be detected in satellite images as periodic alternating brighter/darker stripes. It is known that there are two types of IWs-depression type and elevation type-depending on the water depth in stratified oceans. In this study, we have quantitatively verified the process of converting polarity from depression waves to elevation waves using ERS-2 SAR image acquired over the northern South China Sea. We simulated the evolution of IWs near a turning point with a numerical model for internal wave propagation. The simulation results near the turning point clearly showed us not only a conversion process of IWs from depression to elevation waves, but also a similar wave pattern with the observed SAR image. We also simulated SAR intensity variation near the turning point. The upper layer currents were computed at regular intervals using the numerical model, as the IWs were passing through the turning point. Then, an integrated hydrodynamic-electromagnetic model was used for simulating SAR intensity profiles from the upper layer currents. The simulated SAR intensity profiles were compared with the observed SAR intensities.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 1996년도 정기학술강연회 발표논문 초록집
• /
• pp.42-44
• /
• 1996

Recently due to repeatedly occurrence of flood, a lot of Chinese cities accept new design criteria for their protective project Most of them calculated by a certain type of probability distribution. In order to meet the demand of development economy the return period of design criteria is changed more longer and longer even 1000years, but the data which the calculation dependent on is only about 30-40 years. (omitted)

• 한국농공학회지
• /
• 제14권1호
• /
• pp.2557-2569
• /
• 1972

Hydraulic computations to determine the elevation of canal bottom and mater surface for box type concrete culverts are discussed. Velocity and cross sectional area of flow are computed from Manning's formula. Aad then head loss and velocity head are considered to determine the elevation of bottom and water surface. For stress analysis, 13.5 ton live load and earth pressure are considered. Also longitudinal stress of box culverts is checked.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.182-182
• /
• 2003

Generally, DEM (Digital Elevation Model) is generated by stereo-images acquired same conditions, sensor type, viewing angle, capturing elevation and etc. It is difficult to generate DEM with stereo images acquired different satellite. This study intends that it is DEM generation using pair-images with other sensor systems.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.657-666
• /
• 2017

본 연구에서는, 50인치 이상 대형 텔레비전의 높낮이의 마찰을 줄이기 위한 요인 분석이 실시되었다. 첫째는 피스톤 로드의 정확한 위치 제어를 위한 관형 전단면 제어에 대한 것이다. 여기서 관형 오리피스 전단면과 미로형 오리피스 전단면이 비교되었다. 두 번째 연구는 가스 씰 립 기술에 의한 마찰력 줄이기가 시행되었다. 세 번째는 실린더의 체적의 보상을 위한 주변장치가 피스톤 로드의 체적을 압축함으로서 세부사양을 결정하고 체적 보상 실험을 수행하는 것이다. 이로 인한 연구 결과들은 다음과 같다. 첫째는 CAE 및 실험적 고려를 통한 관형과 미로형 사이의 오리피스 전단면에 있어서, 미로형 오리피스의 전단면이 마찰을 줄이는데 뛰어났다. 둘째는 가스 씰 립 기술에서, 중공 로드의 실험 결과에서 외경 20 mm, 내경 8 mm의 직경을 가지는 것이 30 킬로그램을 가정한 50인치 이상의 텔레비전에 가장 적합한 것으로 확인되었다. 셋째는 사양결정과 체적 보상 실험을 위한 체적 보상의 안전성 문제와 성능의 총체적 고려사항 결과 중공로드 외경 8 mm, 내경 4 mm와 리벳 시스템이 결정되었다. 마지막으로, 300 mm의 이동거리에서는 관형, 미로형 오리피스에 있어 직경 0.4~0.6의 오리피스에서는 미로형 오리피스가 발견되지 않았다.

• 한국조경학회지
• /
• 제29권1호
• /
• pp.22-31
• /
• 2001

The purpose of this study is to compare calculated pollutant loadings using pollutant load unit factors and vector type coverage, and expected mean concentration(EMC) and raster type of digital elevation model(DEM). This study is also focusing on comparison of the advantages and the disadvantages of the two methods, and seeking for a method of calculation of pollutant loadings using DEM. Estimation of pollutant inputs using pollutant load unit factors has limitations in identifying seasonal variations of pollutant loadings. Seasonal changes of runoffs should be considered in the calculation of pollutant loadings from catchments into reservoirs. Evaluation of pollutant inputs using runoff-coefficient and EMC can overcome these drawbacks. Proper EMC and runoff-coefficient values for the Koeup stream catchments of the Koheung estuarine lake were drawn from review of related papers. Arc/Info was employed to establish database of spatial and attribute data of point and non-point pollutant sources and characteristics of the catchments. ArcView was used to calculate point and non-point pollutant loadings. Pollutant loads estimated with either unit factors-coverages, i.e., pollutant load unit factors and vector coverages f point sources and land use, or EMC and digital elevation mode(DEM) were compared with stream monitoring loads. We have found that some differences were shown between monitoring results and estimated loads by Unit Factors-Coverage and EMC-DEM. Monthly variations of pollutant loads evaluated with EMC-DEM were similar to those with monitoring result. The method using EMC-DEM can calculate accumulated flows and pollutant loads and can be utilized to identify stream networks. A future research on correcting the difference between vector type stream using flow direction grid and digitalizing vector type should be conducted in order to obtain more exact calculation of pollutant loadings.

• 한국농촌건축학회논문집
• /
• 제14권3호
• /
• pp.109-119
• /
• 2012

This study aims to analyze architectural characteristics of railway station facilities which were built with development of railroads from Japanese Colonial Period to 1950's. To achieve this goals, 7 railway stations in Gyeongju area that are worth preserving were set up as research targets. For this study, I analyzed literature of the railway station and drawings which the KORAL Daegu Branch is keeping. Railway stations without a construction drawing investigated a direct visit. After analyzing the railway station facilities, the architectural properties such as plan, elevation and section have been identified. The results are as follows. First, Each modern railway station is usually consisted of waiting room and office, and ancillary spaces have been added. Over the years, however, the space was expanded horizontally. In that case, the structure and finish materials have been changed, like now. Second, Most of the roof shape is 'Matbae'(gable roof), especially Gyeongju station and Bulguksa Station are 'Woojingak roof. The roof structure is truss structure, especially as Pratt and Scissors type, but Gyeongju Station's structure is a reinforced concrete. Third, main doorway of waiting room is located in the center of the front gable. However, small stations like 'Ahwa' and 'Ipsil' station to ensure the passengers' waiting area are placed next to the office area.