• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.954-963
• /
• 1996

Particle displacement distributions of the fundamental thickness shear vibration mode and overtone modes in an energy-trapped single resonator and an energy-trapped double acoustically coupled filter were calculated. The effects of the width of a pair of partial eletrodes and the magnitude of the plate back of the resonator on the particle displacement distributions of its symmetric vibration mode and anti-symmetric vibration mode were investigated. And the effects of the width of a pair of partial eletrodes, the width of the gap between two pairs of partial electrodes and the magnitude of the plate back of the filter on the particle displacement distributions of its symmetric vibration mode and anti-symmetric vibration mode were investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.371-376
• /
• 1997

A 100*100.mu.m$^{2}$ aluminum micro mirror is designed and fabricated using a thick photoresist as a sacrificial layer andas a mold for nickel electroplating. The micro mirror is composed of aluminum mirror plate, two nickel support posts, two aluminum hinges, two address eletrodes, and two landing electrodes. The aluminum mirror plate,which is supported by two nickel support posts, is overhung about 10.mu.m from the silicon substrate. THe aluminum mirror plate is actuated like a seesaw by electrostatic force generated by electic potential difference applied between the mirror plate and the address electrode. This paper presents some methods to measure the optical and the dynamic characteristics of the fabricated micro mirror.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.67-73
• /
• 1987

The feasibility for a practical use of underwater wet arc welding process is experimentally investigated by using low hydrogen and high oxide type electrodes and TMCP steel plates. Main results are summarized as follows: 1)The absorption speed of the coated low hydrogen and high titanium oxide type eletrodes becomes constant after about 30 minutes in water, and more steeping time in water does not influnce welding arc behavior. 2) By bead appearance and X-ray inspection, the high titanium oxide type electrode is better than the low hydrogen type in underwater arc welding process. 3) The mechanical properties of underwater wet arc welds depend upon welding conditions more than those of in-air welds, and the optimum welding condition can be obtained. 4) Because of quenching effect by rapid cooling rate in underwater wet welding, the maximum hardness of HAZ is increased relatively higher in underwater wet welding, process.

• Journal of the Korean Professional Engineers Association
• /
• v.30 no.3
• /
• pp.43-51
• /
• 1997

Vacuum tubes are electron tubes in which the motion of electrons are utilized. There are many kinds of vacuum tubes, e.g. diode tubes, triode tubes, pentodes. muti-tubes and etc. Generally accommodated in glass tube, its eletrodes can be seen easily from outside and it easy to understand. In 1884 Edison discovered a current flow in the vacuum tube. He could not, however, explain this phenomenon. This is called Edison effect. In 1904 Fleming developed the backup for the practical diode theory. The most important milestone in this early history of electronics came in 1906 when De Forest put a third electrode (a grid) into the above, and thus invented the triode tube. It is 90 years since the triode was invented by De Forest (as of 1996) and 100 years (centennial also as of 1996) since the specific electric change e/mo$_0$ ≒ 1.7589 ${\times}$ 1011 (C/kg) was confirmed by the English scientist Thomson in 1896. On the occasion of the 90th and 100th anniversary of these inventions and discovery, E would like to describe the rise and 1111 of the vacuum tubes and the current status of these tubes.

• The Korean Journal of Ceramics
• /
• v.6 no.4
• /
• pp.333-338
• /
• 2000

$Ba_{0.7}Sr_{0.3}TiO_3$(BST) thin films were deposited simultaneously on various electrodes and buffers by the sputtering technique. When the substrate temperature was varied, the BST thin film on each electrode showed good crystallinity above $550^{\circ}C$ as revealed by X-ray diffraction measurements. The surface morphology, determined by atomic force microscopy, indicated that the roughness of BST thin films on $RuO_2$was substrate dependent. However, BST thin films on Ru electrodes are smoother and showed no substrate dependence, probably because the precursor surface diffusion length was greater than the sinusoidal perturbations of the wavelength.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.1
• /
• pp.33-38
• /
• 2000

In this study, multilayer piezoelectric actuators were fabricated with 75 layers by a conventional multi-layer capacitor (MLC) techniques, using 70Ag/30Pd paste as an internal electrode which can be sintered at low temperature and have cost down effect in mass productions. The multilayer piezoelectric actua-tors had no defects such as diffusions of internal electrode to ceramic bodies and shortages of internal electrodes. The multilayer piezoelectric actuators did not show the crack in the ceramics parts and the gapping phenomena in the external eletrodes when Ag paste was used as external electrodes. The multilayer piezoelectric actuators showed a maximum displacement of 4${\mu}{\textrm}{m}$ at 100V dc voltage and kept the maximum displacement constant for 300 seconds. The multilayer piezoelectric actuators showed good matching properties between ceramic bodies and AgPd internal electrodes. We confirmed the possibility of large-scaled production of the multilayer piezoelectric actuators with superior electrical properties and cost down effect using 70Ag/30Pd paste as an internal electrodes.