• Analytical Science and Technology
• /
• v.16 no.5
• /
• pp.418-425
• /
• 2003

Inorganic elemental content of bottom ash generated from municipal solid waste incinerator was determined by neutron activation analysis. Bottom ash samples were collected monthly from incinerator located in city D, strained out by the 5 mm sieve, dried by oven and pulverized by agate mortar. The samples were irradiated at NAA #1 irradiation hole in HANARO research reactor of Korea Atomic Energy Research Institute and the irradiated samples were measured by HPGe-gamma-ray spectrometer. From the activity of measured nuclides, 33 elements including As, Cr, Cu, Fe, Mn, Sb and Zn were determined applying activity creation formula and nuclear data. The quality control was conducted by simultaneous analysis with NIST standard reference materials.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.250-257
• /
• 2018

We developed new composites by combining the solid waste from Low-Density Polyethylene in the form of plastic bag (PB) and biomass from rice husk (RH),in the form of $(RH)_x(PB)_{1-x}$ (x = (1, 0.9, 0.7, 0.5)), as alternative fuels for electrical energy sources, and for providing the best solution to reduce environmental pollution. Elemental compositions were obtained by using proximate analysis, ultimate analysis, and X-ray fluorescence spectroscopy, and the thermal characteristics were obtained from thermogravimetric analysis. The compositions of carbon and hydrogen from the ultimate analysis show significant increases of 20-30% with increasing PB in the composite. The activation energy for RH is 101.22 kJ/mol; for x = 0.9 and 0.7, this increases by 4 and 6 magnitude, respectively, and for x = 0.5, shows remarkable increase to 165.30 kJ/mol. The range of temperature of about $480-660^{\circ}C$ is required for combustion of the composites $(RH)_x(PB)_{1-x}$ (x = (1, 0.9, 0.7, 0.5)) to perform the complete combustion process and produce high energy. In addition, the calorific value was determined by using bomb calorimetry, and shows value for RH of 13.44 MJ/kg, which increases about 30-40% with increasing PB content, indicating that PB has a strong effect of increasing the energy realized to generate electricity.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.482-489
• /
• 1985

The substituted quinolinium salts of pentachlorooxomolybdate (V) have been synthesized and characterized by means of the investigation of elemental analysis, infrared spectra, electron spectra, electric conductivity. The results of elemental analysis were well coincided with the theoretical value and all prepared salts were mononuclear complexes. The complexes were binary univalent electrolytes and analyzed d-d transition and charge transfer transition.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.5
• /
• pp.523-528
• /
• 1996

Aerosol Particles were collected in a heaby traffic region in pusan. Samples were collected in two size fractions with a two-stage sampler during the day and the night. Elemental concentrations of these aerosol particles were determined by a PIXE(Proton Induced X-ray Emission) analysis method. The results suggest that the elements originating mainly from natural sources such as Si, Ca, Fe, Cl, and K are dominent in the coarse fraction, but the elements such as S, Pb, Br, and Zn are dominent in the fine fraction. Br/Pb ratio are evaluated in both coarse and fine size fraction, and which are mainly emitted automobile sources. The study further also discussed other Br/Pb ratio related works described elsewhere. Sulfur in the fine fraction was continuously increased during the sampling period without time variation.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.191-194
• /
• 2002

Humic acid, fulvic acid and humin present in volcanic ash soil were isolated by IHSS standard procedure and their characteristics were analyzed as a basic study to evaluate the effect of humic substances on the behaviour of pollutants in contaminated surface soil. The volcanic ash soil contained 42.1 % of total organic matter based on the oven-dried soil, and humin, humic and fulvic acids corresponded to 67.5 %, 15.2 %, 7.6 % of TOM respectively. Structural informations of the humic fractions were obtained from their elemental analysis and IR, CPMAS C-13 NMR spectral analysis and the differences among them are discussed with their C/H, O/C ratios and distributions of carbon types in the molecules.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.3
• /
• pp.25-32
• /
• 2001

The major purpose of this paper is to develop an uncertainty estimate for the calibration of thermopile instruments used to measure solar radiation parameters. We briefly describe the solar radiation parameters most often measured, instrumentation, reference standards, and calibration techniques. The bulk of the paper describes elemental sources of error and their magnitude. We then apply a standard error analysis methodology to combine these elemental error estimates into a statement of total uncertainty for the instrument calibration factor. Our results allow one to evaluate the accuracy of a radiometric measurement using thermopile instrumentation in the light of the application, such as engineering test evaluation or for validation of theoretical models.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.40-47
• /
• 1993

To diversify the area of application of UBET to the analysis of ring rolling which produces rings having more complex cross-sectional configuration, an element of triangular cross-section has been introduced and the corresponding kinematically admissible velocity field has been derived while considering the material flow between neighboring elements. The theoretical perdictions in roll torque and profile formation show good agreement with the experiments. The effect of process parameters such as feed rate and taper angle of the roll groove has been discussed.

• Analytical Science and Technology
• /
• v.37 no.1
• /
• pp.12-24
• /
• 2024

In this study, laser-induced breakdown spectroscopy (LIBS) was used to estimate the degree of rice polishing. As-threshed rice seeds were dehusked and polished for different times, and the resulting grains were analyzed using LIBS. Various atomic, ionic, and molecular emissions were identified in the LIBS spectra. Their correlation with the amount of polished-off matter was investigated. Na I and Rb I emission line intensities showed linear sensitivity in the widest range of polished-off-matter amount. Thus, univariate models based on those lines were developed to predict the weight percent of polished-off matter and showed 3-5 % accuracy performances. Partial least squares-regression (PLS-R) was also applied to develop a multivariate model using Si I, Mg I, Ca I, Na I, K I, and Rb I emission lines. It outperformed the univariate models in prediction accuracy (2 %). Our results suggest that LIBS can be a reliable tool for authenticating the degree of rice polishing, which is closed related to nutrition, shelf life, appearance, and commercial value of rice products.

• Nuclear Engineering and Technology
• /
• v.37 no.5
• /
• pp.503-510
• /
• 2005

An instrumental neutron activation analysis was used to measure the concentrations of about 24 elements associated with airborne particulates (PM10) that were collected in the most polluted urban region of Daejeon city, Korea from 2000 to 2002. Using the measurement data for various elements, both the extent of elemental pollution in the study area and the seasonality in their distribution characteristics were examined. Examinations of their distribution patterns indicated that most elements with crustal origin tend to exhibit seasonal peaks during spring, while most elements with anthropogenic origin tend to exhibit seasonal peaks during fall or winter. In order to explain the factors regulating their mobilization properties, the data were processed by a factor analysis. Results of the factor analysis suggested competing roles of both industrial and natural source processes, despite that the study site is located at a downwind position of the industrial complex. Based on the overall results of this study, it is concluded that the site may be strongly impacted by man-made sources but the general patterns of elemental distributions in the study area inspected over a seasonal scale are quite consistent with those typically observed from natural environment.

• Textile Coloration and Finishing
• /
• v.29 no.2
• /
• pp.69-76
• /
• 2017

To get the proper treatment conditions, sulfonation reactions of persimmon tannin with sodium sulfite and sulfuric acid were proceeded in various settings, respectively. Also, the property changes were investigated by carrying out the additional analysis: elementary analysis and instrumental analysis using FT-IR, DSC, and TGA. The degree of $-SO_3Na$ substitutions appeared 0.216 and 0.208 under the treatment time of 3 hours and 6 hours, respectively and the degree of $-SO_3H$ substitutions indicated 0.200 and 0.167 under 9 hours and 18 hours, respectively by elemental analysis. In terms of the FT-IR spectras, there was a peak based on the bonds of pyran ring and ether in relation to non-treated and sulphonated tannin at $1,102cm^{-1}$. No peak was shown in the sulfited tannin. An absorption peak which was due to the $C{\rightarrow}O$ of secondary -OH group became evident in nontreated and sulfited tannin at $1,092cm^{-1}$ and $1,090cm^{-1}$, respectively but the same result was not found in sulphonated tannin. The results of TGA analysis of the sulfonated persimmon tannin showed that the sulfonation of it improved thermal properties.