• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.115-124
• /
• 2000

An efficient multi-level (EML) optimization algorithm using discrete variables of framed structures is proposed in this paper. For the efficiency of the proposed algorithm multi-level optimization techniques using a decomposition method that separates both system-level and element-level are incorporated in the algorithm In the system-level, to save the numerical efforts an efficient reanalysis technique through approximated structural responses such as moments and frequencies with respect to intermediate variables is proposed in the paper. Sensitivity analysis of dynamic structural response is executed by automatic differentiation (AD) that is a powerful technique for computing complex or implicit derivatives accurately and efficiently with minimal human effort. In the element-level, to use AISC W-sections a section search algorithm is introduced. The efficiency and robustness of the EML algorithm, compared with a conventional multi-level (CML) algorithm and single-level genetic algorithm is successfully demonstrated in the numerical examples.

• 한국해양학회지:바다
• /
• 제12권3호
• /
• pp.133-141
• /
• 2007

장파와 단파의 거동을 동시에 모의할 수 있는 확장형 Boussinesq 방정식에 대한 유한요소모형을 개발하였다. 3차 공간 미분항을 처리하기 위한 추가변수를 도입하고 Galerkin 가중잔차방법을 적용하여 모형을 수립하였으며, 시간적분방법으로 Adams-Bashforth-Moulton Predictor Corrector 기법을 적용하여 비물리적인 수치분산이나 수치소산 현상을 줄일 수 있도록 하였다. 이 개발된 모형을 검증하기 위해 고립파가 전파하는 문제에 적용을 하였다. 개발된 모형을 적용한 결과 이론해 또는 수리실험 결과에 매우 양호한 일치를 보였다.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.970-977
• /
• 2008

This paper deals with the dynamic characteristics of the shaft with impeller model which is the most important part in developing the resin mixing machine. Through reverse engineering, it is possible to make the shaft with impeller geometry model which is necessary vibration characteristic analysis by commercial impeller. The natural frequency analysis and structural analysis using finite element analysis software are performed on the imported commercial shaft with impeller model. The most important fundamental natural frequency of the shaft with impeller model is around 14.5 Hz, which well agrees with modal testing. The most effective design variables were extracted by ANOM(analysis of means) and pareto chart. This paper presents approximation 2nd order polynomial as design variables using RSM(response surface methodology). Generally, RSM take 2 or 3 design variables, but this method uses 5 design variables with table of mixed orthogonal array. Further more, the analyzed result of the commercial shaft with impeller is to be utilized for the structural design of resin chock mixing machine.

• KIEAE Journal
• /
• 제4권3호
• /
• pp.45-52
• /
• 2004

The purpose of this research was to identify the structural characteristics of open housing typologically and systematically. The main method of this study was content analysis and literature review on open housing. This study found that the typological analysis on terminology and the details of the constituents concerning structural patterns in open housing indicated that the main approaches were classified into three criteria such as 'Organization Element', 'Construction Element', and 'Equipment Element'. Organization Element was classified into 'Main Dwelling Unit Area and its Form', 'Room Organization Method', 'Relationship with the Main Dwelling Unit's External Constituents', and 'Combination Method of Support and Infill'. Construction Element was classified into 'Method of Structure' and 'Structural Element Technology'. Equipment Element was classified into 'Method of Using Duct' and 'Wet Zone Method'. The attributes were determined based on these classifications. The results of this study can be used to construct an evaluation tool and further to develop a framework in understanding open housing. Technical research should be conducted on the variables that affect the flexibility of space.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.187-190
• /
• 2001

Response surface method is applied to evaluate the reliability of laminated composite panels. Since the linear and nonlinear first-ply failure load are computed using deterministic finite element analysis, new probabilistic finite element analysis is not necessary. Tsai-Wu criterion is used to construct the limit state suface. Material properties, layer thickness and lamina strengths of laminated composite panel are treated as random design variables. feasibility and accuracy of current method is validated using Monte-Carlo method Which perform thousand times of finite element analysis directly.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.52-55
• /
• 2000

Investigated via a series of finite element process simulation is the effect of diverse process variables on some selected non-dimensional parameters characterizing the strip in hot strip rolling. Then on the basis of these parameters an on-line model is derived for the precise prediction of roll and roll power. The prediction accuracy of the proposed model is examined through comparison with predictions from a finite element process model.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.185-191
• /
• 1996

The Variation of die bearing is primary way to control the metal flow in hot square die extrusion process. Finite element computations are carried out to assess the influence of die bearing on metal flow and state variables. The finit element method is developed based on ALE description for a rigid-viscoplastic material. Since thermal state computational example, hot square die extrusion with varied die bearing lengths has been analyzed for the profile of a L-section.

• 소성∙가공
• /
• 제10권1호
• /
• pp.23-29
• /
• 2001

In this study, the optimized initial hole shape for T-branch forming was proposed to obtain effective welding region. Design variables were determined by approximation analysis using volume constant condition. We performed 3D elastic-plastic FEM(Finite Element Method) analysis to simulate T-branch forming process. The variation of height and thickness of T-branch with various hole shapes was investigated. The optimized initial hole shape equation was obtained by using results for the numerical analysis.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.1020-1026
• /
• 1994

This paper presents a technique to optimize the shape of waveguide components in H-plane. The technique utilizes the numerical optimization process which employs the vector finite element method. In the optimization process, the sensitivity of an objective function with respect to design variables is computed by introducting adjoint variables, which makes the computation easy. The steepest descent method is then employed to update design variables. As a numerical example, an H-plane waveguide teejunction was considered to obtain optimized shape. Comparison between the initial and optimized shape was made.

• 한국강구조학회 논문집
• /
• 제16권6호통권73호
• /
• pp.819-832
• /
• 2004

본 연구는 구조물의 형상 최적화를 효율적이면서 보다 용이하게 수행할 수 있는 기법을 제안하고자 하였다. 구조물의 형상 표현과 설계변수 선택을 위해 설계요소 개념을 활용하여 설계변수 수를 과감하게 줄일 수 있었고, 등매개변수 사상기법을 이용하여 최적화 과정 중 형상의 변화에 따른 유한요소망을 자동생성 하였으며 효율적인 최적화 과정 수행을 위하여 결정론적 최적화 기법(개선된 허용방향법)과 스토캐스틱 최적화 기법(유전 알고리즘)을 사용하여 그 결과와 효율성을 비교하였다. 최적화 과정 중 구조해석은 유한요소법을 이용하며 구조물의 부피와 단면적 등을 목적함수로 하여 형상 최적화를 수행하였다. 또한 제작성과 시공성을 위한 최종형상 제시를 위하여 최적형상에 완화곡선 처리를 시도하였다. 이상의 연구를 강구조물을 대상으로 한 몇 가지 수치 예에 적용한 결과 설계과정을 보다 단순화시켰으며, 두 가지 기법 모두 최적해에 수렴함으로써 목적함수 값을 효과적으로 개선시킬 수 있었다. 따라서 본 연구는 그 타당성과 적용성이 있다고 판명된다.