• Environmental Analysis Health and Toxicology
• /
• v.21 no.3 s.54
• /
• pp.229-238
• /
• 2006

Although, mercury (Hg) is not a naturally abundant element in the environment, residues frequently occur in many environmental compartments because of widespread contamination from industrial and agricultural practices. This research evaluated Hg-B concentrations of general population who was not occupationally exposed. And also evaluates the association between life factor and health effect with Hg-B concentration of general adult through interrelationship estimation and index about kidney function and oxidative damage that appeared by questionnaire survey and medical examination. Average concentration of Hg-B was 3.19 $\mu$g/L (ND$\sim$8.64 $\mu$g/L), and persons who exceed mercury exposure level (5 $\mu$g/L) presented in WHO (1990) appeared by 16 (7.0%). High-risk group (smoking and meat main intake group) had significantly higher Hg-B concentration than low-risk group (non-smoking and vegetable diet main intake group) (p < 0.05, low-risk group: 3.30 $\mu$g/L (ND$\sim$8.64 $\mu$g/L), high-risk group: 4.27 $\mu$g/L (ND$\sim$7.84 $\mu$g/L).

• Advances in biomechanics and applications
• /
• v.1 no.2
• /
• pp.127-141
• /
• 2014

A preliminary study of a new pulsatile pump that will work to a frequency greater than 1 Hz, is presented. The fluid-structure interaction between a Newtonian blood flow and a piston drive that moves with periodic speed is simulated. The mechanism is of double effect and has four valves, two at the input flow and two at the output flow; the valves are simulated with specified velocity of closing and reopening. The simulation is made with finite elements software named COMSOL Multiphysics 3.3 to resolve the flow in a preliminary planar configuration. The geometry is 2D to determine areas of high speeds and high shear stresses that can cause hemolysis and platelet aggregation. The opening and closing valves are modelled by solid structure interacting with flow, the rhythmic opening and closing are synchronized with the piston harmonic movement. The boundary conditions at the input and output areas are only normal traction with reference pressure. On the other hand, the fluid structure interactions are manifested due to the non-slip boundary conditions over the piston moving surfaces, moving valve contours and fix pump walls. The non-physiologic frequency pulsatile pump, from the viewpoint of fluid flow analysis, is predicted feasible and with characteristic of low hemolysis and low thrombogenesis, because the stress tension and resident time are smaller than the limit and the vortices are destroyed for the periodic flow.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.165-172
• /
• 2021

The purpose of this study was to identify differences in the muscle tone and stiffness of neck muscles according to levels of cardiopulmonary resuscitation (CPR) skill. The subjects were 30 female students in their 20s who were divided into a skilled group (n=15) and an unskilled group (n=15). According to the results, the skilled group showed statistically significant decreases in the stiffness of the lower cervical muscle and the muscle tone of the upper trapezius on the above hand side of hand grips after CPR (p<.05). The unskilled group exhibited a statistically significant difference in both the muscle tone and stiffness of the upper trapezius muscle on both sides after CPR (p<.05). However, no statistically significant differences were found between the two groups. In addition, the non-skilled group showed statistically significant lower values than the skilled group in the mean compression rate, total number of compressions, accuracy of chest compression, and accuracy of chest relaxation (p<.05). This study confirmed that CPR has a myophysiological effect on the neck muscles of those who perform CPR. However, it found that no differences result from individual CPR skill levels that are an important element for the accuracy of CPR.

• Journal of The Korean Society of Integrative Medicine
• /
• v.11 no.3
• /
• pp.195-204
• /
• 2023

Purpose : This study applied general training (control group) or cranio-cervical flexor training (experimental group) using a pressure biofeedback unit along with general training for 4 weeks to secondary school teachers with moderate to severe neck pain and forward head posture. After that, we tried to compare the effects through differences in neck pain intensity (using numberical rating scale), functional performance (using neck disability index), and cranio-vertebral angle change. Methods : All 50 subjects were randomly assigned to either the "experimental group (n= 25)" or the "control group (n= 25)", and the measurements were evaluated in the same way before the intervention (baseline) and after the intervention (4 weeks). During the intervention period, the subject visited the physiotherapy center and made a reservation three times a week at a fixed time as much as possible, and each training session was thoroughly conducted under the 1:1 guidance of the therapist in charge so that the correct movement and number of times could be performed without compensatory action. Results : As a result of the homogeneity analysis on the general characteristics of the subjects, there were no significant differences between the groups in all variables (p>.05). Compared to the "control group", the "experimental group" showed significant improvement after intervention in all measured variables of neck pain intensity, functional performance, and cranial-vertebral angle (p<.05). Conclusion : For secondary school teachers with forward head accompanied by neck pain, cranio-cervical flexor training using a compression biofeedback unit is an excellent method to show superior pain reduction and functional performance improvement compared to general training alone. In addition, it can be presented as a more effective intervention method that can promote recovery of forward head posture, which is an essential element of the solution.

• Geomechanics and Engineering
• /
• v.33 no.6
• /
• pp.583-596
• /
• 2023

The interlayers, either softer or stiffer than the surrounding layers, are usually overlooked during field investigation due to the small thickness. They may be neglected through the analysis process for simplicity. However, they may significantly affect the dynamic behavior of the soil-foundation system. In this study, a series of 3D finite-element Direct-solution steady-state harmonic analyses were carried out using ABAQUS/CAE software to investigate the impacts of interlayers on the dynamic response of a cast in place pile group subjected to horizontal harmonic load. The experimental data of a 3×2 pile group testing was used to verify the numerical modeling. The effects of thickness, depth, and shear modulus of the interlayers on the dynamic response of the pile group are investigated. The simulations were conducted on both stiff and soft soils. It was found that the soft interlayers affect the frequency-amplitude curve of the system only in frequencies higher than 70% of the resonant frequency of the base soil. While, the effect of stiff interlayer in soft base soil started at frequency of 35% of the resonant frequency of the base soil. Also, it was observed that a shallow stiff interlayer increased the resonant amplitude by 11%, while a deep one only increased the resonant frequency by 7%. Moreover, a shallow soft interlayer increased the resonant frequency by 20% in soft base soils, whereas, it had an effect as low as 6% on resonant amplitude. Also, the results showed that deep soft interlayers increased the resonant amplitude by 17 to 20% in both soft and stiff base soils due to a reduction in lateral support of the piles. In the cases of deep thick, soft interlayers, the resonant frequency reduced significantly, i.e., 16 to 20%. It was found that the stiff interlayers were most effective on the amplitude and frequency of the pile group.

• Corrosion Science and Technology
• /
• v.15 no.3
• /
• pp.129-134
• /
• 2016

The effects of Ti on the high temperature oxidation of Ni-based superalloys were investigated by cyclic oxidation at $850^{\circ}C$ and $1000^{\circ}C$. The oxide scale formed at $850^{\circ}C$ consists of $Cr_2O_3$, $Al_2O_3$, and $NiCr_2O_4$ layers, while a continuous $Al_2O_3$ layer was formed at $1000^{\circ}C$. The oxidation rate of the alloy with higher Ti content was higher than the alloy with less Ti content at $850^{\circ}C$, possibly due to the increase in the metal vacancy concentration in the $Cr_2O_3$ layer involved by incorporation of $Ti^{4+}$. However, Ti improved the oxidation resistance of the superalloy at $1000^{\circ}C$ by reducing oxygen vacancy concentration in $Al_2O_3$ layer.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.1
• /
• pp.42-50
• /
• 2006

The multi-criteria group decision making (MCGDM) problem is to determine the best compromise solution in a set of competing alternatives that are evaluated under conflicting criteria by decision maker (DM)s. In this paper, we propose a mixed-integer programming (MIP) model to solve MCGDM. The existing method based on minimizing a distance measure such as Median Approach can not guarantee the best compromise solution because the element of median point vector is defined with respect to each criteria separately. However, by considering all criteria simultaneously, we generate median point that is better for locating the best compromise solution. We also utilize the concept of spatial dispersion index (SDI) to produce a threshold value, which is used as a guideline to choose either the Utopian Approach or the Median Approach. And we suggest using CBITP (Convex hull of individual maxima Based Interactive Tchebycheff Procedure) to provide DMs with various Pareto-optimal solutions so that DMs have broad range of selection.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.431-436
• /
• 2016

In the design of transformer winding, natural vibration frequency is an important parameter. This paper presents a 2D model to calculate axial vibration natural frequency of power transformer winding based on the elastic dynamics theory, and according to the elastic support equivalent principle of radial pressboards. The 3D model to calculate natural vibration frequency can be simplified as a 2D one as the support of pressboards on the winding is same. It is verified that results of the 2D model are consistent with those of 3D one, but the former can achieve much higher calculation efficiency. It shows that increasing the width and number of pressboards can improve axial natural frequency through formula analysis and simulation, and also the relations between the changes of axial pre-compression and axial natural vibration frequency on the windings are investigated. Finally, the proposed 2D model's effectiveness is proved when compared with tested ones.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.261-269
• /
• 2008

A NYF-type (Nb-Y-Zr-F) Khaldzan-Buregtei pegmatite containing rare-earth metals occurs within alkali granitoid complex of the western Mongolia. The pegmatites are considered as differentiates of syenites and alkali feldpar granitic rocks, showing that their rare-earth element concentrations are enriched tens times higher than those from the adjacent alkali granitic rocks. It is suggested that econemic aspects of the pegmatites can be controlled by the magnitude of lateral and vertical extensions and local grade variation of REE-bearing pegmatites.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.57-63
• /
• 2007

The occurrence of a corona is that electrical discharge due to the heterogeneity that occurs when an electrical field is concentrated in an electrode due to a cusp formed on said electrode. Wire treatment at the end of a 154[kV] dead end clamp for end users accelerates the occurrence of corona, which in turn leads to power loss and noise. In this study, the characteristics of the corona which occurs between porcelain insulators and support clamps of overhead lines used in 154[kV] power receiving facilities for end users were investigated. The corona, which cannot be identified by one common method, was measured utilizing a UV image camera. A risk assessment for fire damage and its status was suggested. The stress distribution of the electrical field by length of bare wire was suggested by means of the finite element method(FEMLAB). As a result, it was found to affect a porcelain insulators. These results can be utilized for the enhancement of clamp installation and safety in power facilities.