• 대한토목학회논문집
• /
• 제28권5B호
• /
• pp.475-483
• /
• 2008

사고 등으로 인해 하천에 순간적으로 주입되는 오염물질의 2차원 이송-확산을 모의하기 위하여 SUPG법에 의한 2차원 유한요소 모형을 개발하고 주입된 질량과 모의 질량간의 오차를 산정하였다. 지배방정식으로부터 질량 오차 산정식을 유도하고 이를 간단한 예제에 적용하였다. 적용 예제로는 단순 직선수로에서 선원을 통한 질량주입과 일방향의 등질 유속장을 가지는 2차원 공간에서 점원을 통한 질량주입 문제를 가정하였으며, 기존의 Galerkin법과의 비교를 위하여 두가지 수치기법에 대한 모의 검증을 실시하였다. 검증결과 기존의 Galerkin법에 의한 모의 결과에 비하여 SUPG법을 통한 수치모형의 구성이 모의의 정확성뿐만 아니라 주입 질량의 보존에 있어서도 보다 정확한 방법임을 확인하였다.

• Advances in nano research
• /
• 제15권4호
• /
• pp.367-384
• /
• 2023

Natural frequency behavior of graphene platelets reinforced composite (GPL-RC) joined truncated conical-cylindrical- conical shells resting on Winkler-type elastic foundation is presented in this paper for the first time. The rule of mixture and the modified Halpin-Tsai approach are applied to achieve the mechanical properties of the structure. Four different graphene platelets patterns are considered along the thickness of the structure such as GPLA, GPLO, GPLX, GPLUD. Finite element procedure according to Rayleigh-Ritz formulation has been used to solve 2D-axisymmetric elasticity equations. Application of 2D axisymmetric elasticity theory allows thickness stretching unlike simple shell theories, and this gives more accurate results, especially for thick shells. An efficient parametric investigation is also presented to show the effects of various geometric variables, three different boundary conditions, stiffness of elastic foundation, dispersion pattern and weight fraction of GPLs nanofillers on the natural frequencies of the joined shell. Results show that GPLO and BC3 provide the most rigidity that cause the most natural frequencies among different BCs and GPL patterns. Also, by increasing the weigh fraction of nanofillers, the natural frequencies will increase up to 200%.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.213-216
• /
• 2000

Minimum-cost linear network flow problems could be transformed with equal to assignment problems. Traditional method to solve the linear network flow problems are improved source-cost by transform the simple cycle flow. Auction algorithm could be applied to same element using the initial target price and dispersion calculation. Also, each elements are obtained by $\varepsilon$-relaxation methods. In this paper we proposed; 1)minimum-cost flow problem, 2)minimum-cost flow problem by the mathematical equivalent and 3) extraction $\varepsilon$-relaxation & expand transfer problem with minimum-cost flow. It can be applicant to PCB design by above mentioned.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.527-531
• /
• 2005

지진해일파는 풍파에 비해 파장이 매우 길어 장파로 간주되지만 조석에 비하면 파장이 짧아 상대적으로 분산성이 강하므로, 먼거리를 전파하는 경우에는 분산성을 고려하여 해석하여야 한다. 특히 동해에서 발생하는 지진해일의 경우 파원이 작고 수심이 깊어 단주기파 성분이 강하므로 그 물리적인 분산효과가 매우 중요하다. 이에 본 연구에서는 지진해일 수치모의시 임의로 구성된 유한요소망과 양해법을 사용하면서도 복잡한 Boussinesq 방정식 대신 간단한 Boussinesq-type의 파동방정식을 사용하면서도 물리적 분산효과를 정도 높게 고려할 수 있는 능동적인 분산보정기법을 이용한 2차원 유한요소모형을 개발하여 가상진원에 의해 발생된 2차원 지진해일 전파에 대하여 수치모의한 결과, 요소크기와 시간간격이 고정되었음에도 불구하고 다양한 수심에 대해 선형 Boussinesq 방정식의 해석해와 매우 잘 일치하는 좋은 결과를 보였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.467-472
• /
• 1996

This study discusses special aspects of severe accident related recriticality modeling and analysis in the Advanced Neutron Source (ANS) reactor.$^{1, 2)}$ The analytical comparison of three elements core to former two elements case is conducted including evaluation of suitable nuclear cross-section sets to account for the effects of system configulation, fuel and moderator mixture temperature, material dispersion and the other thermal-hydraulics. Three elements core ANS reactor is the alternative core design which was proposed as a modified core design, with three fuel elements instead of two, that would allow operation with only 50% enriched uranium (former uranium fuel is the baseline design value of 93%) A comprehensive test matrix of calculations to evaluate the threat of a criticality event in the ANS is described. Strong dependencies still on geometry, material constituents, and thermal-hydraulic conditions are verified. Therefore, the concepts of mitigative design features are qualified.d.

• 소음진동
• /
• 제7권4호
• /
• pp.579-588
• /
• 1997

When a membrane couples with compressive fluid, waves on the membrane follow a typical dispersion relations. One of characteristics of this relations is that evanscent waves occur below cutoff frequency. We have attempt to use this spatially decaying characteristics as a low frequency sound absorber. Theoretical development has required to solve membrane-fluid coupled linear differential. The solution has been successfully obtained by using eigenfunctions. To assure the obtained solution, experiment was also performed. The comparison was quite satisfactory. We conclude, based on these theoretical as well as experimental evidences, that it is very likely possible to use a membrane as a low frquency sound control element.

• 조명전기설비학회논문지
• /
• 제18권4호
• /
• pp.97-103
• /
• 2004

단상 유도전동기의 기동전류는 정격전류의 3-6배로 전등의 명멸, TV 화면의 산란, 전동기의 절연 열화, 옥내배선의 순간적인 열화 등을 발생시켜 전력손실, 가전제품의 효율저하 및 수명을 단축시키고 있다. 이러한 문제점을 개선하기 위해 본 논문에서는 트라이액과 교류변류기를 사용하여 기동전류를 3.7(%) 감소시키는 방법을 제안하였으며, 또한 반도체 소자를 사용함으로써 수명은 반영구적임을 확인하였다.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.142-148
• /
• 2013

High-power ultrasonic promotes a chemical reaction by its own energy, thus it has been used for sonochemistry applications. For example, it has been mostly used for mixing, reaction catalyst, dispersion and disintegration. High-power ultrasonic transducer is made with structure based on a Bolt-clamped Langevin type Transducer (BLT), But it has difficulty in the development because degradation of piezoelectric ceramic by the heat generation of BLT. In this study, for a development of the transducer of 25 kHz and 1000 W used in sonochemistry and industrial cleaning, BLT with a hole in its center and tubular type waveguide of the transducer were designed based on finite element method (FEM). The transducer was fabricated based on the design parameter, and the impedance characteristics are measured experimentally and compared with the numerical results.

• Structural Engineering and Mechanics
• /
• 제51권6호
• /
• pp.1047-1065
• /
• 2014

The article presents the methodology for finding material damping capacity at higher frequency and at relatively lower amplitudes. The Lamb wave dispersion theory and loss less finite element model is used to find the damping capacity of composite materials. The research has been focused on high frequency applications materials. The method was implemented on carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) plates. The Lamb waves were generated using ultrasonic pulse generator setup. The hybrid method has been explored in this article and the results have been compared with bandwidth methods available in the literature.

• Journal of information and communication convergence engineering
• /
• 제15권4호
• /
• pp.237-243
• /
• 2017

This paper presents an analysis of the electromagnetic interference of a heterogeneous power bus where electromagnetic bandgap (EBG) cells are irregularly arranged. To mitigate electrical-noise coupling between high-speed circuits, the EBG structure is placed between parallel plate waveguide (PPW)-based power buses on which the noise source and victim circuits are mounted. We examine a noise suppression characteristic of the heterogeneous power bus in terms of scattering parameters. The characteristics of the dispersion and scattering parameters are compared in the sensitivity analysis of the EBG structure. Electric field distributions at significant frequencies are thoroughly examined using electromagnetic simulation based on a finite element method (FEM). The noise suppression characteristics of the heterogeneous power bus are demonstrated experimentally. The heterogeneous power bus achieves significant reduction of electrical-noise coupling compared to the homogeneous power buses that are adopted in conventional high-speed circuit design. In addition, the measurements show good agreement with the FEM simulation results.