• 영재교육연구
• /
• 제12권4호
• /
• pp.108-119
• /
• 2002

제1회 한국물리탐구토론대회에는 10개의 문제가 출제되었는데 본 연구에서는 이들 10개의 문제 중 ${\ulcorner}$접착 테이프(Adhesive tape)${\lrcorner}$ 문제를 해결한 5개 팀의 보고서를 비교 분석하였다. 그 결과 학생들은 접착 테이프를 갑자기 뗄때 빛이 발생하는 원인을 정전기 발생, 전자의 이동, 에너지의 변환 등으로 해석하였다. 그러나 탐구의 과정에서 확산적 사고를 가지고 창의적 아이디어를 제시한 팀은 소수에 불과하였다. 본 대회는 탐구 토론대회이므로 탐구의 과정별로 새로운 아이디어를 제안하여 결론에 이르는 창의적 탐구의 과정이 제안되어야 한다.

• Tribology and Lubricants
• /
• 제21권4호
• /
• pp.177-184
• /
• 2005

The molecular dynamics simulation of nanoimprint lithography (NIL) using $SiO_2$ stamp and amorphous poly-(methylmethacrylate) (PNMA) film is performed to study pattern transfer in NIL. Force fields including bond, angle, torsion, van der Waals and electrostatic potential are used to describe the intermolecular and intramolecular force of PMMA molecules and $SiO_2$ stamp. Nose-Hoover thermostat is used to control the system temperature and cell multipole method is adopted to treat long range interactions. The deformation of PMMA film is observed during pattern transfer in the NIL process. For the detail analysis of deformation characteristics, the distributions of density and stress in PMHA film are calculated. The adhesion and friction forces are obtained by dividing the PMMA film into subregions and calculating the interacting force between subregion and stamp. Their effects on the pattern transfer are also discussed as varying the indentation depth and speed.

• 상하수도학회지
• /
• 제27권2호
• /
• pp.155-164
• /
• 2013

The main purpose of this research was to examine the adsorption/ion exchange characteristics of radioactive species such as cesium and strontium onto synthetic Na-birnessite (sodium-birnessite). As part of efforts to investigate the sorption behavior of cesium and strontium onto synthetic Na-birnessite, batch isotherm tests were performed under different experimental conditions. Na-birnessite was synthesized by the oxidation of $Mn^{2+}$ ions in sodium hydroxide solution. The synthetic Na-birnessite was characterized by powder x-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDS), and Brunauer-Emmett-Teller (BET) surface area analysis. Cesium and strontium concentrations were determined by atomic absorption spectroscopy (AAS). The removal efficiency of strontium by Na-birnessite was around 95 % which was much higher than that of cesium (~ 32 %). The results imply that strontium has a higher affinity for Na-birnessite than cesium because strontium, divalent cation leads to larger electrostatic attraction than monovalent cesium.

• 공학교육연구
• /
• 제5권2호
• /
• pp.3-9
• /
• 2002

최근 들어 인터넷과 웹의 보급이 확산됨에 따라 이를 이용한 교육용 콘텐츠들이 활발히 제작되고 있다. 본 연구에서는 전기전자 분야의 기본과목인 전기자기학을 교과의 대상으로 하여 콘텐츠를 제작하였다. 이 교과를 다루는 대부분의 교재들은 복잡한 수식으로 현상을 설명하고 있으므로 학생들이 현상을 이해하는 것이 쉽지 않다. 그리하여 학습 효과의 증대를 위하여 HTML, 그림, 애니메이션 및 음성 같은 멀티미디어 기법을 사용하여 콘텐츠를 제작하였다. 또한 다양한 전기자기적인 문제의 해석 및 연습에 사용할 수 있는 소프트웨어가 저자에 의해 개발되어 콘텐츠 내에 활용되었다. 본 콘텐츠의 전체적인 구성은 정전계, 정자계, 시변전자계 및 전파의 전파로 되어 있다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3103-3108
• /
• 2010

Conducting polymers (CPs) are widely used as matrixes for the entrapment of enzymes in analytical chemistry and biosensing devices. However, enzyme-catalyzed polymerization of CPs is rarely used for immunosensing due to the difficulties involved in the quantitative analysis of colloidal CPs in solution phase. In this study, an enzyme-amplified electrocatalytic immunosensor employing a CP as a redox marker has been developed. A polyanionic polymer matrix, $\alpha$-amino-$\omega$-thiol terminated poly(acrylic acid), was employed for precipitation of CP. The acrylic acid group acts as a polyanionic template. The thiol terminus of the polymer was used to produce self-assembled monolayers (SAMs) on Au electrodes and the amine terminus was employed for immobilization of biomolecules. In an enzymeamplified sandwich type immunosensor, the polyaniline (PANI) produced enzymatically is attracted by the electrostatic force of the matrix polymer. The precipitated PANI was characterized by electrochemical methods.

• Bulletin of the Korean Chemical Society
• /
• 제29권3호
• /
• pp.590-594
• /
• 2008

The inclusion complexes of cyclodextrins (CDs) with flavones in aqueous solution were investigated by phase solubility measurements. The effect of b -cyclodextrin (b -CD), heptakis (2,6-di-O-methyl) b -cyclodextrin (DM-b -CD) and 2-hydroxypropyl-b -cyclodextrin (HP-b -CD) on the aqueous solubility of three flavones, namely, chrysin, apigenin and luteolin was investigated, respectively. Solubility enhancements of all flavones obtained with three CDs followed the rank order: HP-b -CD > DM-b -CD > b -CD, and besides, CDs show higher stability constant on luteolin than that on others flavones. 1H-nuclear magnetic resonance (NMR) spectroscopy and molecular modeling was used to help establish the model of interaction of the CDs with luteolin. NMR spectroscopic analysis suggested that A-C ring, and part of the B ring of luteolin display favorable interaction with the CDs, which was also confirmed by docking studies based on the molecular simulation. The observed augmentation of solubility of luteolin by three CDs was explained by the difference of electrostatic interaction of each complex, especially hydrogen bonding.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권9호
• /
• pp.471-475
• /
• 2001

ln this paper, a micromachined micromechanical switch is presented. The presented switch is operated in the vertical direction to the substrate by an electrostatic force between two parallel plates. The moving plate is pulled down to connect the bumps of the bias node$(V_{DD}/ or GND)$ to the bumps of the output node when a oltage difference exists between the moving plate and the input plate. The switch was designed to operate at a low switching voltage$(\risingdotseq5V)$ by including a large-area, narrow-gap, parallel plate capacitor A theoretical analysis of the designed switch was performed in order to determine its geometry fitting the desired pull-in voltage and release voltage. The designed switch was fabricated by surface micromachining combined with Ni electroplating. From the experimental results of the fabricated switch, its pull-in voltage came Out to be less than 5V and the measured maximum allowable current was 150mA. The measured average ON-state resistance was about 8$\Omega$, and the OFF-state resistance was too high to be measured with digital multimeter.

• Structural Engineering and Mechanics
• /
• 제17권5호
• /
• pp.641-654
• /
• 2004

This paper presents a theoretic model of a smart structure, a transversely isotropic piezoelectric thick square plate constructed with three laminas, piezoelectric-elastic-piezoelectric layer, by adopting the first order shear deformation plate theory and piezoelectric theory. This model assumes that the transverse displacements through thickness are linear, and the in-plane displacements in the mid-plane of the plate are not taken to be account. By using Fourier's series expansion, an exact Navier typed analytical solution for deflection and electric potential of the simply supported smart plate is obtained. The electric boundary conditions are being grounded along four vertical edges. The external voltage and non-external voltage applied on the surfaces of piezoelectric layers are all considered. The convergence of the present approach is carefully studied. Comparison studies are also made for verifying the accuracy and the applicability of the present method. Then some new results of the electric potentials and displacements are provided. Numerical results show that the electrostatic voltage is approximately linear in the thickness direction, while parabolic in the plate in-plane directions, for both the deflection and the electric voltage. These results are very useful for distributed sensing and finite element verification.

• 전자공학회논문지A
• /
• 제30A권3호
• /
• pp.76-87
• /
• 1993

We present a self-consistent, 2-dimensional solution of the Poisson and Sch rodinger equation based on the finite difference method with a nonuniform mesh size for a AlGaAs/GaInAs/GaAs HEMT devide. During the interative self-consistent calculation, however, we calculate Schrodinger equation only a some region of device, not a fully region in order to save the moemory and the speed-up of computation, and then use the approximated data for the other region using by a interpolation method with a given values. Also we adopt the proper matrix transformation method that allows preservation of the symmetric, form of the discretized Schrodinger equation, even with the use of a nonumiform mesh size, therefor, can reduce the computation time. We calculate the wavefunction, eigenstates and the electron concentration uat channel layer nder the thermal equilibrium and the biased conditions, respectively. Also,these parameters are used to solve 2-dimensional tdistribution of potential in he entire region of device. It is proved that the method is very efficient in finding eigenstages extending over relatively large spatial area without loss of accuracy. So, it can be used rather easily in any sarbitrary modulation doped utucture.

• 농업과학연구
• /
• 제23권2호
• /
• pp.250-260
• /
• 1996

Observed results of the adsorption between two competing anions for the shared sorption sites represent that the adsorption phenomena may depends on the characteristics of anion and available sorption sites in a given conditions. In binary systems, adsorption of one species can significantly influence the fate of the other anion, resulting in control of the extent of solute-adsorbate distributions throughout soil profile. And the proton-donation mechanisms by organic anions having a carboxyl as a functional group can also influence the adsorption of inorganic anions onto the hydroxylated sites of Fe and Al oxides. However, study of competitive adsorption of specifically adsorbed anions illustrates some of difficulties which arise in interpretation of reactions at oxide/aqueous solution interfaces. At least two factors prevented a simple analysis of reactions. First, at any pH value the maximum amount of adsorbate taken up at the surface depends on the identity of the anion. Second, it was necessary to postulate the sorption sites where the anion can be adsorbed. Hence, anions having non-specific adsorption characteristics are less capable for sorption sites, compared to those of specific adsorption characteristics, even though competition complies both ordinary and electrostatic interactions for sorption sites. Therefore, competition among chemical species in soil matrix can be of major significance in determining the effective mobility of any reactive anions with sorption sites.