• 제목/요약/키워드: Electronic state

검색결과 3,092건 처리시간 0.03초

Carassius auratus(goldfish)를 이용한 Chlorothalonil의 단기간 생물농축계수와 분배계수의 측정 (Determination of Short-term Bioconcentration Factor and Partition Coefficient on Chlorothalonil in Carassius auratus(goldfish))

  • 차춘근;전봉식;민경진
    • 한국환경보건학회지
    • /
    • 제21권3호
    • /
    • pp.38-47
    • /
    • 1995
  • The Bioconcentration factor (BCF) is used as an important criterion in the risk assessment of environmental contaminants. Also it can be used as indicator of biomagnification of environmentally hazardous chemicals through food-chain as well as a tool for ranking the bioconcentration potential of the chemicals in the environment. This paper reports the measured BCF value on Chlorothalonil in Carassius auratus(goldfish), under steady state, and examined correlation between the BCF value and the partition coefficient or acute toxicity or physicochemical properties. Carassius auratus(goldfish) was chosen as test organism and test period were 3-day, 5-day. Experimental concentrations were 0.005, 0.01 and 0.05 ppm. Chlorothalonil in fish tissue and in test water were extracted with n-hexane and acetonitrile. GC-ECD was used to detecting and quantitating of Chlorothalonil. Partition coefficient was determined by stir-flask method. $LC_{50}$ was determined on Chlorothalonil. Carbaryl and BPMC. The obtained results were as follows. 1. It was possible to determine short term BCFs of Chlorothalonil through relatively simple procedure in environmental concentrations. 2. $BF_3$ of Chlorothalonil in concentration of 0.005, 0.01 and 0.05 ppm were 2.1866$\pm$0.23446, 3.5269$\pm$0.23517, 10.2045$\pm$0.18053 and BCFs were 6.6543$\pm$0.55257, 6.9774$\pm$0.02500, 23.4576$\pm$2.06884, respectively. 3. Chlorothalonil concentration in fish extract and BCFs of Chlorothalonil were increased as increasing test concentration and prolonging test period. 4. Fate of test-water concentration on Chlorothalonil was greater than that of control-water con-centration. It is considered that greater fate of test-water concentration on Chlorothalonil is due to hydrolyzing nitrile group under the mild condition and substituting chloro group by some aromatic compounds in test water. 5. Determined logP of Chlorothalonil was 2.80. And determined $LC_{50}$ of Chlorothalonil in time of 24, 48, 72 and 96 hr were 0.1684, 0.1402, 0.1400, 0.1352(mg/l) respectively. And $LC_{50}$ of Carbaryl in above times were 19.918, 18.635, 18.466, 18.12(mg/l) respectively. $LC_{50}$ of BPMC were 10.248, 9.166, 9.087, 8.921(mg/l) respectively. 6. It is suggested that the BCF of Carbamates depend on partition coefficients. But BCF of Chlorothalonil, organochlorine pesticide, would be strongly influenced by steric, electronic effect of substituents than partition coefficient.

  • PDF

수량화(數量化)(II)에 의한 산사태사면(山沙汰斜面)의 위험도(危險度) 판별(判別) (On the Determination of Slope Stability to Landslide by Quantification(II))

  • 강위평;무라이 히로시;오무라 히로시;마호섭
    • 한국산림과학회지
    • /
    • 제75권1호
    • /
    • pp.32-37
    • /
    • 1986
  • 산사태안전도판별(山沙汰安全度判別)에 대한 기초자료를 얻기 위하여 1979년(年) 8월(月) 집중호우(集中豪雨)(일강우량(日降雨量) 465mm)에 의하여 산사태(山沙汰)가 발생한 진해지구(鎭海地區)를 모델로 하여 이 지구(地區)의 지형도상(地形圖上)($S=\frac{1}{5,000}$)에 $2cm{\times}2cm$(실면적(實面積) $100m{\times}100m=1ha$) 단위의 격자(格子)를 얹어 산사태지(山沙汰地) 74개, 비산사태지(非山沙汰地) 119개 계(計) 193개의 mesh에 대하여 산사태발생(山沙汰發生)의 각(各) 요인(要因) 및 수준(水準)을 계측(計測)하여 수량화(數量化)(II)의 수법(手法)에 의하여 해석(解析)한 결과 산사태발생(山沙汰發生)에 기여도(寄與度)가 높은 요인(要因)의 순위(順位)는 다음과 같다. 1) 식생(植生), 2) 종단사면형(縱斷斜面形), 3) 사면위치(斜面位置), 4) 경사(傾斜), 5) 방위(方位), 6) 곡수(谷數). 또 침엽수(針葉樹) 10년생(年生) 내외, 복합사면(複合斜面), 하강사면(下降斜面), 산록(山麓), 경사(傾斜), $10^{\circ}-15^{\circ}$, 방위(方位) NW, 곡수(谷數) 1개의 각(各) 수준(水準)이 불안전측(不安全側)에, 침엽수(針葉樹) 20~30년생(年生), 활엽수(濶葉樹), 상승사면(上昇斜面), 평형사면(平衡斜面), 산정(山頂) 등의 수준(水準)이 안전측(安全側)에 기여(寄與)하고 있다. 그리고 판별구분치(判別區分値)는 -0.123이고 적중률(適中率)은 72%로서 비교적 양호한 양(兩) group구분(區分)을 할 수 있었다.

  • PDF

염료감응형 광전기화학 물분해 전지용 Tri-branched tri-anchoring organic dye 개발 (Tri-branched tri-anchoring organic dye for Visible light-responsive dye-sensitized photoelectrochemical water-splitting cells)

  • 박정현;김재홍;안광순
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.87-87
    • /
    • 2010
  • Photoelectrochemical (PEC) systems are promising methods of producing H2 gas using solar energy in an aqueous solution. The photoelectrochemical properties of numerous metal oxides have been studied. Among them, the PEC systems based on TiO2 have been extensively studied. However, the drawback of a PEC system with TiO2 is that only ultraviolet (UV) light can be absorbed because of its large band gap (3.2 - 3.4 eV). Two approaches have been introduced in order to use PEC cells in the visible light region. The first method includes doping impurities, such as nitrogen, into TiO2, and this technique has been extensively studied in an attempt to narrow the band gap. In comparison, research on the second method, which includes visible light water splitting in molecular photosystems, has been slow. Mallouk et al. recently developed electrochemical water-splitting cells using the Ru(II) complex as the visible light photosensitizer. the dye-sensitized PEC cell consisted of a dye-sensitized TiO2 layer, a Pt counter electrode, and an aqueous solution between them. Under a visible light (< 3 eV) illumination, only the dye molecule absorbed the light and became excited because TiO2 had the wide band gap. The light absorption of the dye was followed by the transfer of an electron from the excited state (S*) of the dye to the conduction band (CB) of TiO2 and its subsequent transfer to the transparent conducting oxide (TCO). The electrons moved through the wire to the Pt, where the water reduction (or H2 evolution) occurred. The oxidized dye molecules caused the water oxidation because their HOMO level was below the H2O/O2 level. Organic dyes have been developed as metal-free alternatives to the Ru(II) complexes because of their tunable optical and electronic properties and low-cost manufacturing. Recently, organic dye molecules containing multi-branched, multi-anchoring groups have received a great deal of interest. In this work, tri-branched tri-anchoring organic dyes (Dye 2) were designed and applied to visible light water-splitting cells based on dye-sensitized TiO2 electrodes. Dye 2 had a molecular structure containing one donor (D) and three acceptor (A) groups, and each ended with an anchoring functionality. In comparison, mono-anchoring dyes (Dye 1) were also synthesized. The PEC response of the Dye 2-sensitized TiO2 film was much better than the Dye 1-sensitized or unsensitized TiO2 films.

  • PDF

승화법에 의한 단결정성장공정에서 이중온도구배가 대류현상에 미치는 영향 (Effects of stabilizing temperature gradients on thermal convection in rectangular enclosures during phsysical vapor trnasport)

  • 김극태;최장우;이민옥;권무현;권순길
    • 한국결정성장학회지
    • /
    • 제9권1호
    • /
    • pp.94-100
    • /
    • 1999
  • 음향광 소재와 광전자 재료용으로 적합한 염화제일수은은 밀폐된 용기에서 승화법에 의한 결정성장으로 제 조된다. 온도경계조검으로 밀폐된 용기의 측면에 각각 다른 온도로 부하하였을 때에는 수직적과 수평적 대류현상이 동 시에 일어난다. 수직적 레이 무차원수에 대한 수평적 레이 무차원수의 비율이 1.5 보다 클 때, 대류유동구조는 $2.79{\times}10^4$, Pr = 0.91, Le = 1.01, Pe = 4.60, Ar = 0.2 and $C_v$ = 1.01에서 한 개의 셀에서 여러개의 셀로 변한다. ${Delta}T_H{\ge}0.3$에 대하여, ${Delta}T$의 증가함과 엑스펙트 비율의 감소함에 따라 $$\mid$U$\mid$_{max}$이 증가한다. 0.1에서 1까지의 엑스펙트 비율의 범위에서는 $$\mid$U$\mid$_{max}$$\sqrt{{\Delta}T^_H\;^{\ast}}$와 직접적이며 선형적인 관계에 있다. 엑스페트 비율이 감소함에 따라 대류의 흐름은 불안정 하게 되며, 그 결과 대류의 크기는 증가한다. 수직적 온도구배는 대류의 흐름을 불안정하게 하여 진동하게 하며, 그 반면 에 수명적 구배는 흐름을 안정화시킨다.

  • PDF

철도차량용 지능형 변압기 손실 저감을 위한 Dual Active Bridge 컨버터의 Modulation 기법 연구 (Modulation Technique of Dual Active Bridge Converter to Improve Efficiency of Smart Transformers in Railroad Traction System)

  • 김성민;이승환;김명룡
    • 한국철도학회논문집
    • /
    • 제19권6호
    • /
    • pp.727-735
    • /
    • 2016
  • 철도차량용 구동 시스템의 주 변압기를 지능형 변압기로 대체하는 것은 철도차량의 효율을 높이기 위한 효과적인 방법이다. 지능형 변압기는 고전압 입력단을 저전압 직류단으로 변환하는 정류단 모듈과, 변환된 복수의 저전압 직류단 전압을 직/병렬로 연결하여 저전압 직류 출력 전압을 제어하는 Dual Active Bridge (DAB) 컨버터 모듈로 구성된다. DAB 컨버터는 고주파 변압기를 사이에 두고 양 측 Full-Bridge 컨버터의 전압 합성 방법에 따라 전력이 양방향으로 전달될 수 있다. 이 때, 양 측 Full-Bridge 컨버터의 전압 합성 방법에 따라 고주파 변압기로 흐르는 전류의 형태가 달라지게 되며, 이는 효율에 직접적인 영향을 미치게 된다. 본 논문은 중/저 전력 조건에서 DAB 컨버터의 효율을 개선하기 위한 새로운 modulation 방법을 제안한다. 제안하는 modulation 방법은 DAB 컨버터 내에 발생할 수 있는 무효 전력을 0으로 제어하도록 하며, 출력단 컨버터를 다이오드 정류기와 유사한 동작을 하도록 함으로써, 스위칭 손실을 최소화하도록 하였다. 제안된 modulation 방법을 통한 손실 저감은 900Vdc의 직류단 전압을 갖는 DAB 컨버터에 대한 시뮬레이션 결과를 통해 검증하였다.

후면 형상에 따른 결정질 실리콘 태양전지의 후면전계 형성 및 특성 (Back Surface Field Properties with Different Surface Conditions for Crystalline Silicon Solar Cells)

  • 김현호;김성탁;박성은;송주용;김영도;탁성주;권순우;윤세왕;손창식;김동환
    • 한국재료학회지
    • /
    • 제21권5호
    • /
    • pp.243-249
    • /
    • 2011
  • To reduce manufacturing costs of crystalline silicon solar cells, silicon wafers have become thinner. In relation to this, the properties of the aluminium-back surface field (Al-BSF) are considered an important factor in solar cell performance. Generally, screen-printing and a rapid thermal process (RTP) are utilized together to form the Al-BSF. This study evaluates Al-BSF formation on a (111) textured back surface compared with a (100) flat back surface with variation of ramp up rates from 18 to $89^{\circ}C$/s for the RTP annealing conditions. To make different back surface morphologies, one side texturing using a silicon nitride film and double side texturing were carried out. After aluminium screen-printing, Al-BSF formed according to the RTP annealing conditions. A metal etching process in hydrochloric acid solution was carried out to assess the quality of Al-BSF. Saturation currents were calculated by using quasi-steady-state photoconductance. The surface morphologies observed by scanning electron microscopy and a non-contacting optical profiler. Also, sheet resistances and bulk carrier concentration were measured by a 4-point probe and hall measurement system. From the results, a faster ramp up during Al-BSF formation yielded better quality than a slower ramp up process due to temperature uniformity of silicon and the aluminium surface. Also, in the Al-BSF formation process, the (111) textured back surface is significantly affected by the ramp up rates compared with the (100) flat back surface.

예부선의 해상교량 안전통항을 위한 안전운항지원시스템 구축에 관한 연구 (A Study on Traffic Supporting System Enhancing the Safe Passage under Sea Bridge for Towing Vessels)

  • 이윤석;윤귀호;박영수;김종성;조익순
    • 해양환경안전학회지
    • /
    • 제13권4호
    • /
    • pp.71-78
    • /
    • 2007
  • 예부선은 항만 개발 및 매립, 해상교량 건설, 항로 준설 등 우리나라 해양 산업 건설에 핵심적인 공헌과 역할을 수행하여 왔다. 또한 국내 등록 척수로는 가장 많은 비중을 차지하고 있고, 부선의 경우 전용화와 대형화가 꾸준히 진행되어 일반 상선과 등급의 부선이 운항되고 있다. 이로 인한 해양사고의 증가에도 불구하고 예부선에 대한 국가적인 차원에서의 안전운항 대책이 미흡한 실정이다. 본 연구는 최근 빈번하게 발생하고 있는 해상교량과 관련된 예부선의 사고에 대한 안전 운항 대책을 제안하고자 한 것으로, 해양사고의 통계 자료와 사례 분석, 예부선 운항 실태를 운송계약 측면과 인원 구성을 검토하여 해상교량의 안전 통항을 위해 선학 자체적으로 점검해야 하는 항해계획과 운항점검표를 일례로 제시하고, 예부선의 안전운항 향상을 위한 전자차트시스템 기반의 안전항행지원시스템을 제안한다.

  • PDF

$RuO_2$박막의 미세 구조가 박막형 마이크로 슈퍼캐패시터의 특성에 미치는 영향 (Effect of RuO$_2$ Thin Film Microstructure on Characteristics of Thin Film Micro-supercapacitor)

  • 김한기;윤영수;임재홍;조원일;성태연;신영화
    • 한국재료학회지
    • /
    • 제11권8호
    • /
    • pp.671-678
    • /
    • 2001
  • $RuO_2$ 박막을 전극으로 하여 Pt/Ti/Si 기판 위에 $RuO_2$ /LiPON/$RuO_2$의 다층 구조로 이루어진 전고상의 박막형 마이크로 슈퍼캐패시터를 제작하였다. 전극용 $RuO_2$박막은 반응성 dc 마그네트론 스퍼터를 이용하여 $O_2$/[Ar+$O_2$]비를 증가시키며 성장시켰고, 비정질 LiPON 고체전해질 박막은 순수한 질소분위기 하에서 rf 스퍼터링으로 성장시켰다. 상온에서의 충-방전 측정을 통해 $RuO_2$ 박막의 미세구조에 따라 슈퍼캐패시터의 사이클 특성이 영향을 받는 것을 알 수 있었다. Glancing angle x-ray diffraction(GXRD)과 transmission electron microscopy (TEM) 분석을 통해 산소 유량의 증가가 $RuO_2$박막의 미세 구조의 영향을 주는 것을 알 수 있었고, X-ray photoelectron spectroscopy (XPS) 분석을 통해 산소 유량 비의 증가가 Ru과 산소간의 결합에도 영향을 줌을 알 수 있었다. 또한 사이클 후 슈퍼캐패시터의 TEM 및 AES depth profiling 분석을 통해, 충-방전 시 $RuO_2$와 LiPON과의 계면반응에 의해 형성된 계면 층이 사이클 특성에 영향을 줌을 알 수 있었다.

  • PDF

보안교육과 보안관리 역량의 상관관계 분석: 인가된 내부자 기밀유출사례를 중심으로 (An Analysis of Relationship between Industry Security Education and Capability: Case Centric on Insider Leakage)

  • 이치석;김양훈
    • 한국전자거래학회지
    • /
    • 제20권2호
    • /
    • pp.27-36
    • /
    • 2015
  • 국가 상대로 한 국가기밀유출과 더불어 최근 산업 기술유출은 점점 늘어가고 유출의 범위가 기술유출 중심에서 정보통신, 전기전자, 방위산업, 전략물자 불법수출, 외국의 경제 질서교란, 지식재산침해 등 신 경제안보 분야로 다양화되는 추세로 유출 피해는 유출된 기업에 피해를 줄 뿐만 아니라 국가의 이익과 국내 산업 전반에 영향을 끼칠 수 있다. 국가정보원 산업기밀 보호센터 통계에 따르면, 기술유출의 주된 원인은 해킹과 악성코드와 같이 외부에 의한 것뿐 아니라 전 현직직원 등 내부유출이 약 80%를 차지하며, 협력업체 의한 기술유출이 뒤를 이어 금전유혹과 개인의 이익으로 인한 기술유출이 계속해서 꾸준히 증가하고 있다. 그러나 그간의 연구들은 핵심자산 유출을 방지하기 위하여 기업의 보안역량을 측정하거나, 관리를 위한 측정지표를 개발하는 연구가 주를 이루고 있었으며, 가장 핵심이 되는 기업구성원들의 보안활동에 대한 기초연구가 미흡한 상황이다. 따라서, 본 연구에서는 보안 활동에 가장 기초가 되는 보안교육이 기업의 보안역량에 미치는 영향에 대해 분석하였다. 그 결과, 보안교육은 보안역량에 양(+)의 상관관계를 나타내는 것으로 분석되었다.

준이차원 전하밀도파 CeTe2의 각분해 광전자 분광 연구 (ARPES Study of Quasi-Two Dimensional CDW System CeTe2)

  • 김대현;이현진;강정수;김형도;민병훈;권용성;김준원;민병일
    • 한국자기학회지
    • /
    • 제20권5호
    • /
    • pp.173-177
    • /
    • 2010
  • 이 연구에서는 각분해 광전자 분광법(angle-resolved photoemission spectroscopy: ARPES)을 시용하여 전하밀도파(chargedensity-wave: CDW)를 형성하는 물질인 $CeTe_2$의 전자구조를 연구하였다. $CeTe_2$의 ARPES 데이터에서는 분산적인 띠들이 분명하게 관찰되었다. $CeTe_2$의 일정에너지(constant energy: CE) 맵에서는 4중 대칭성(fourfold symmetry)이 관찰되었으며, 그 형태가 문헌에 있는 $CeTe_2$의 CE 맵과 유사하였다. 이러한 발견은 $CeTe_2$의 CDW 형성이 $2{\times}2$ 형태의 살창 변형에 의한 것임과 4f 전자들이 $CeTe_2$의 CDW 형성에 별다른 기여를 하지 않는다는 것을 나타낸다. 이 연구로부터 $CeTe_2$에서 페르미 준위 근처의 전자들은 주로 Te(1) 5p와 Ce 5d 전자들이며 Te(1) 5p 전자들에 의한 띠가 CDW 형성에 기여하고 Ce 5d 전자들에 의한 띠는 CDW 상태에서도 페르미 준위를 가로지르는 금속성을 나타낸다는 것을 알 수 있었다.