• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.185-186
• /
• 2008

Use of the carbon nanotube is superior to general powder state materials of dispersion property. Because its ratio of diameter and length(aspect ratio) is very large, it has been known as a type of ideal nano-reinforcement composite. It used solution mixing method for specimen fabrication. To research dispersion property, we used FE-SEM(Field Emission Scanning Electron Microscope) and AFM(Atomic Force Microscope). As a result, this tendency confirms new conductivity network in which the carbon nanotube between carbon black constitute molecules shows a bond by similar constructive property.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.243-244
• /
• 2007

The improvement of critical current property as well as the mechanical property is important for the application. The improvement of the critical current can be achieved by forming the nano size defect working as a flux pining center inside the superconductor. The nano size defect can be effectively formed by using neutron iradiation. All properties of most of materials after irradition become bad On the contrary, the critical current property of the superconductor is largely improved after irradiation.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.5
• /
• pp.233-236
• /
• 2012

The driving properties of a particle-insertion method that filters non-moving particles are analyzed, by measuring its optical and electrical properties. An area that is occupied by the moved particles is proposed, as a desirable evaluation method for a reflective display. To compare the driving property of the particle-moving method with that of the reported simple particle-loading method, two panels are fabricated, according to the different particle-insertion methods, in the same panel condition, of which the width of ribs is $30{\mu}m$, the cell size is $220{\mu}m{\times}220{\mu}m$, the cell gap is $116-120{\mu}m$, the q/m value of the black particles is $+1.8{\mu}C/g$ and that for the white particles is $-4.3{\mu}C/g$. The particle-moving method has a filtering effect which excludes the non-moving particles, inserting only movable particles into the respective cell, so that a panel fabricated by the particle-moving method can drive most of the particles in a cell. Also, most of the particles move at the threshold voltage of 40 V, with enhanced reflectivity. The driving property is also verified by measurement of the occupation rate of the moved particles.

• The Journal of Society for e-Business Studies
• /
• v.4 no.1
• /
• pp.103-115
• /
• 1999

The electronic cash, an electronic equivalent of the real paper money, has been recently proposed as one of the various payment methods for electronic commerce. In this paper, we design an electronic cash payment system based on a new electronic cash payment protocol that can effectively provide full anonymity and avoid double-spending. The protocol is suitable for use as the electronic cash control or electronic cash database. The protocol support also security and electronic cash property.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1278-1280
• /
• 1995

A probe type fiber-optic sensing techique for electric current measurement is applied in this paper. The technique is based on the Faraday effect which meaning is that polarization state of light is rotated by magnetic field. In experiment, test wire is located at inside and outside of the probe to be measured. The experimental results prove not only linear property, but also polarization rotation property according to the distance from outside of probe.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.217-217
• /
• 2009

In this study, the effect of bending strain on the transport property and critical current of lap and butt-jointed BSCCO tapes have been investigated. The samples were joined using a mechanically controlled jointing procedure. In order to ensure a uniform pressure application at the joint part, a single point contact has been devised and also to achieve a uniform thickness at the joint interface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.247-250
• /
• 2002

SAW filters were fabricated on $LiNbO_3$ substrates to evaluate frequency response and properties of photolithography. In the both of etch and lift-off methods, lift off method was superior to etch method in fabrication process. Frequency response property was measured by network analyzer. From measurement of acoustic property, SAW propagation velocity was 3574.9m/sec for $LiNbO_3$ SAW filter.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.156-159
• /
• 1994

The electrical property of polyvinylalcohol (PVA) films (several hundreds ∼ several $\mu\textrm{m}$ in thickness) formed by sphere bulb blowing technique, has been studied. The electrical conductivity of relatively thick films (>several thousands ) has been very high and enhanced by the exposure either to high humidity fo air or NH$_3$. which can be explained in terms of the role of ionic transport. The use of PVA film as NH$_3$ sensor is also proposed. In PVA films less than 1500 , two conducting states: high conducting and low conducting states, are observed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.143-152
• /
• 2008

This thesis is what accident in sea have been produced as lost themselves life and property about 600~700times at every years. Therefore this was induced to experiment on a national basis that the role of communication of ship is to move from lose themselves life and property.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.628-634
• /
• 1998

The properties of the n-type impurities nitrogen and phosphorus in diamond have been investigated by means of electronic band structure calculations within the framework of the semiempirical extended Huckel tight-binding method. For diamond with the nitrogen and phosphorus substitutional impurities, calculated density of states shows the impurity level deep in the band gap. This property can be derived from the substantial <111> relaxation of the impurity and nearest-neighbor carbon atoms, which is associated with the population of an antibonding orbital between them. The passivated donor property of the P-vacancy complex which lies deep in the gap is also discussed.